Your cart is empty.
Your cart is empty.Product Description
M3 Motherboard Standoffs&Screws&Nuts Kit
Packaged Included:
---Standoffs:
M3*20mm 20pcs, M3*15mm 20pcs,, M3*10mm 20pcs,, M3*6mm 20pcs,
M3*20+6mm 20pcs, M3*15+6mm 20pcs, M3*10+6mm 20pcs, M3*6+6mm 20pcs,
---Nuts: M3 nuts 80pcs
---Screws: M3*6 screws 80pcs
Nice brass finish with quality threads. All the threads are correctly sized, clean, and burr free. The overall fit and finish of these standoffs is good.
This is a very nice assortment of brass standoffs&nuts&screws and all neatly organized in a compartment box, easy to adjust the selected step or rise.
The pieces in this M3 Motherboard Standoffs&Screws&Nuts Kit are well finished and have a precise fit. Very nice selection of standoffs nuts and screws.
This M3 Motherboard Standoffs&Screws&Nuts Kit is a great kit with a lot of options. It is a great place to start if you are not sure of the lengths you need to use. If you need a lot of one size, you'll be able to select the correct length to buy. This is a must have item for those who like to build their own pc's, Audrina, and other electronic devices. Perfect fit for Raspberry Pi and associated components, good for mounting PCBs, sensor panel screen , too.
Alex K
2025-08-29 16:16:41
These are a great price and feel like quality hardware! I ordered the M3 kit and it works perfectly for my Arduino and ESP8266 boards. Definitely a step up from the nylon screws I was previously using, my boards now feel securely fastened and level. The plastic case is a little flimsy but it came packed with a bit of bubble wrap on the inside to keep the pieces from mixing. Will definitely get this kit again in the other sizes!
Michael
2025-06-07 20:11:18
Have used these a lot for my DIY synthesizer builds. Lots of different options and all the hardware feels sturdy.
Karl Lindheimer
2025-05-25 16:28:15
I ordered this assortment of brass standoffs because I'l always building electronic projects and need a secure and quality way to fasten circuit boards and other items to make my projects look professional.
Zopiac
2025-04-16 12:13:18
All the parts were there, which was the important bit. At least, close enough. I think I'm missing a nut and have an extra screw, but may have miscounted -- I bought the kit for the standoffs anyhow.The case is garbage, however. The front was taped shut to keep it closed during transport, but this means that the back blew out so the hinges are completely busted. This can be taped up to some degree to restore operation.The compartment dividers are removable, which would be handy if you were planning on reusing the box (as it stands, I doubt it will survive at all until I'm halfway done using the parts contained), except that they are the sort that slide out to be repositioned/removed, meaning that they give no structural support to the rest of the box. And since the outer walls are so flimsy, they bend out easily allowing parts to shuffle between compartments when you're trying to grab one out. This is fairly easily remedied by supergluing them into the slots.There is no organisation guide on the inside of the lid as product pictures show, but one can be printed out I suppose.Overall, if I were buying this product with full intent to make good use of its case, it'd be a 2/5 at best. But since I'm only really interested in the standoffs, it fits my needs well for a 4/5 score
Quin
2025-03-14 10:27:05
All the stand-off choices in the this kit would have cost a fortune if I bought them a few at a time from the hardware store. I finished 5 power supply projects and still have a ton of stand-off parts left for other things. This was a no-brainer for me and my hobbies.
TL Kummell
2025-01-21 13:29:18
I needed standoffs to support an IQAudio Raspberry Pi 5 audio hat. The mix of parts made it easy to change out the "motherboard" standoffs AND add additional standoffs to support the hat. There are three different sizes M2, M2.5 and M3 which was lucky for my project as the case I was using had M2.5 captive nuts. I had assumed they were M2. Final thought... If you are looking for this sort of product this one will most likely work for you.
Keeks
2025-01-10 17:37:54
I used these to supplement a refurbished PC build. I managed to shorten a standoff with pliers to fit an M.2 drive. My motherboard was missing the screw for the M.2, so I couldn't use the included standoff due to mismatched threads. With a pair of pliers, I had a fix in no time!
CatMom
2024-12-29 16:22:02
lots of parts - I have already used for several projects. I'll order more
D'arcie wolf
2024-12-11 18:14:07
Was damaged during shipping, seller does not do exchanges or partial refunds to keep damaged but still functional products. Would recommend buying similar items from Amazon directly if possible to avoid potential headaches.That said the M3 standoffs are high quality, and on that front the product is good and recommended.
Recommended Products