Your cart is empty.
Your cart is empty.Troy Fortune
2025-09-02 12:18:44
Item was easy to install and works as advertised. Very high quality construction.
Kevin G
2025-08-31 15:17:02
Meter came missing a washer that I asked the company to send. The company asked for more $ for washer. I returned the meter and ordered a less expensive meter that works perfect.
wil brown
2025-07-15 16:09:49
what can you say about a water meter? it measures water use, it's pretty simple to install...if you have a multi unit building it's worth the cost.
1PoorMan
2025-06-13 13:29:25
The meter appears to work, and the stainless-steel body is a very solid feature.The dials frequent shutter and stall as they rotate which gives the impression of imminent failure, but the pulse is repeatable, which is all I need for the installed application.You can clearly hear the turbine wheel’s rotation, so I do not know how long this unit will last.In the end, it is a $100.00 meter so my expectation is not that it would be NASA quality, but only time will tell if the notations above are indicative of a very short lifecycle.
A Person
2025-05-29 12:55:06
It was working for a while and then stopped. The sprinkler box had a leak and it submerged the meter and I think this is what might have killed it.You would figure that a stainless water meter could take water. I haven't been able to pull it and look deeper but it does not seem to be impeding flow at this time
Turk182
2025-05-11 14:05:48
Meter seems to be decent quality, but the included NPT adapters are poorly made. They cut the threads too deep on them so they bottom out before sealing. I couldn't get it to seal with either thread tape or pipe dope. I ended up having to cut a couple threads off the end of the connector to get it to seal.Poor quality control does not inspire confidence.
S. Powell
2025-02-20 16:50:20
I purchased this meter because it offered the ability to give real-time information on water usage. I installed it downstream from the water company meter and ran a ~15' cat5 ethernet cable to my irrigation controller box and wired it to a Raspberry Pi (with a couple of 4.7K resistors inline to protect the Pi from shorts). A simple python script monitors the water meter and logs usage. Other scripts provide hourly alarm reports and daily reports on water usage.Regarding accuracy, this meter agrees to within about 2% of the Sensus iPerl meter that the water company uses.In terms of usefulness, the meter immediately pointed out a slow leak which turned out to be a slowly-running toilet (warped flapper) that I hadn't been told about. It also informed me that my drip irrigation system probably has some leaks in it, based on the amount of water used when it runs.
badssloumd
2025-02-08 17:27:08
Very nice unit. Easy to install (threaded ends) seems to be quite sensitive to flow.
Recommended Products