Your cart is empty.
Your cart is empty.Product Description
Precautions:
1.Fully shaking before usage, shake like up side down will be better.
2.Please Wear gloves and mask during whole print process to avoid skin contact directly, if you get the resin on your skin unfortunately, please wash with water immediately until clean it up.
3.Resin is one kind of speical chemisty product, please keep away from children, sunlight shining and dust.
4.Brush it gently with a soft brush when model complete, and dry it up with cool wind, these steps will let you get the model in better condition
Jamg he 10K Standard resin is High Precision resin, printing with it will let your model get more detail to be shown, and just like you are creating an artist.
- High Prescision
- Low Viscosity
- Less Shrinkage
- Smooth Surface
- Low Odor
JAMG HE Standard Plus Resin
High Prescision, Low Viscosity, Less Shrinkage
Jamg He dedicate to supplying our customers with the world-leading 3D printing solution. We creatively adhere to explore potential applications of 3D printing resin into different fields such as jewelry, dental, medical, aerospace, engineering etc.
- Density(g/cm3): 1.05~1.25g/cm3
- Viscosity(MPa·s): 70~175mPa·s
- Maximum force(KGF): 133.4±10%
- Tensile Strength（MPa): 31.44±10%
- Deformation point of maximum force(mm): 4.33±10%
- Elongation at Break(%): 7.65±10%
- Maximum bending strength(MPa): 40.82±10%
- Impact strength(j/m): 50±10%
High Precision-Printing with JAMG HE 10K water washable resin will let your models has great surface and high precision detail which is obviously.
Fast curing and excellent stability: 10k Water washable resin can be fast printed 2-4s/each layer in LCD mono,and stable quality makes your every prints are successfully.
Jamg he 10K Standard resin is High Precision resin, printing with it will let your model get more detail to be shown, and just like you are creating an artist.
TifaLockheartFFVII
2025-08-19 16:37:34
I absolutely LOVED this resin! I miss it and wish it would return! It's been my go-to for transparent prints! I've gotten so many beautiful and perfect models with it! Great quality!
Fred Bey
2025-08-09 14:57:34
Detail is quite nice, but I'm thinking the '10k resolution' is just a way to make their resin sound better. I've never found a resin that didn't work with a setting as low as the printer can go. Even the anycubic translucent green, the first resin I ever used.As with all regular resins, this stuff is quite brittle, but not as brittle as the water washable stuff, in my opinion. I doubt any model printed in this would survive a drop or a fall. Small items like swords, rifles, etc will probably break off at some point. Just the nature of the water washable stuff.On an interesting note, this came with a few gloves and a USB stick. The USB has a slicing software install on it (that I've never heard of), with a 12 month redemption for the paid version (for free). I have no need of this, so I reformatted it and now it's another USB for the printers to use. Can ALWAYS use another 4GB USB stick!!As to the low odor, my nose doesn't work well, and my printer lives in the garage, so I can't say I noticed any smell, but then I never do.
JW
2025-08-03 20:14:40
Quality is great. Price would be great around 22..seems like price is up and down every other day. Won’t be buying more until price is right.
Jane Fairchild
2025-07-28 13:20:19
Good standard resin that works without issue using my regular print parameters.Here are the settings I used to achieve great results:* Initial exposure time: 50s* Exposure time: 4s* Rising height: 6mm* Motor speed: 1mm/s* Turn off delay: 4s* Bottom exposure layers: 5This resin has really good bed adhesion, and supports stay strong. Finish is smooth. Detail is off the charts.In my experience, it requires more wash time, but less cure time than standard resin.Bottle is easy to pour from without making a mess and wasting resin. Also a plus.Just an overall joy to work with. Great stuff!
ICantBeBothered
2025-07-10 14:11:38
I’m new to the JamgHe brand of resin. I print with a Creality brand printer and I kept to the recommended range of settings for a monochrome LCD screen. This resin works great and I would agree with the statement that this is low odor resin. That is not ‘no odor’, but definitely lower than some other brands I’ve tried. Resin has a tendency to ‘fumigate’ my house every time I use it and while I could definitely smell it, it wasn’t a pungent as other brands have been. With the resin came a set of rubber gloves and a filter. I have to say, I feel a little left out though as I did NOT get the complimentary usb thumb drive that I’ve seen others have gotten, but that's okay (I have a lot of thumb drives).
James Houghton
2025-06-27 18:44:17
As others have stated, branding a resin as 10K resin is a bit misleading. Resin is liquid until it's exposed to UV and will take whatever shape is set for that layer. So 4K, 8K, and the mythical 10K prints should all work with pretty much any resin. There really aren't any 10K printers yet and 8K are only starting to gain popularity in marketplace now. Besides, with the size of the screens on resin printers, 4K and 8K would be really hard to discern.It is a decent resin, however. My test print came out fine. It is a bit brittle and with a smaller model with some smaller pieces I did break a piece off while removing the supports. It does happen about 40% of the time with this particular model. But be aware you won't want to drop delicate models printed with this resin.I had no issues with bed adhesion. Resin consistency was good after a pretty good shake of the bottle. And the odor was a cross between a water based resin and a standard resin. My models cured just fine and other than the slightly greater rigidity and brittleness, they were good prints.
Shaddii
2025-04-22 14:20:57
Came with paper funnels and gloves. I spent a lot of time trying to dial this in on my AnyCubic Photon M3 but was never able to get it as good as I wanted. The prints that did come off the machine were very brittle. There are better resins on Amazon that can be had for the same price.
Kate B.
2025-04-12 16:12:50
Like most have mentioned I don't understand the "10k" labeling. As far as I am aware we do not have any 10k printers, we are actually just starting to get into 8k printers. That weird labeling aside, the resin does exactly what it needs to. Bottle is the same as many others and the seal was perfect with no issues. Smell wise I say it's about the same as any other brand out there. The actual part that matters is the print quality, I had to do some minor adjustments in order to get the best quality prints. Once i got that sorted the prints were really good.
Great resin, good viscosity and details
2024-12-23 14:09:40
Overall it's a pretty good resin didn't have any problems with it. Retains the the details and not to brittle
Recommended Products