Your cart is empty.
Your cart is empty.The 3M Full Face piece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile—use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding.
Packer Backer
2025-09-03 15:20:30
Bought for husband to use when grinding. Fits snug like it should. Replaced a wore out very expensive unit. Quality seems like it will last.
Doctor Dan
2025-08-29 15:34:15
I recently upgraded from a half mask and goggles to the 3M 6800 full face respirator.The 6800 is way more comfortable, and no fogging, and my eyes are better protected.The only downside is that it is almost impossible to communicate while wearing this mask.The step up to a 3M model with a voice diaphragm is way more expensive, so I am nowlooking into creating a DIY speaking option -- with a mic inside the mask and a smallbattery powered amp / speaker to deliver my voice. Should be fun!
Jeremy
2025-08-27 18:06:03
I use this mask for jogging during cedar fever season in Texas. Superior to everything else I’ve tried like the half mask respirator. This one sits firmly and the field of view is wide open and no fogging. With the half mask my eyes were still get itchy and watery so instead of goggles I went with the full face mask.Maybe I look weird to the other bikers and joggers but that’s a small price to pay for being able to breathe normally during the winter. I thought about trying one of the cheaper options, but then I decided to pay extra upfront because 3M has great engineering. So far it’s worth it for the extra cost for the comfort and how well it works.
dustin perham
2025-08-23 12:46:57
Love it, Great materials. Only wish is it came with a starter pack of screen protectors. (But protectors are easy to find ) However great quality, i use every day
URL Cruiser
2025-08-22 13:08:18
First mask I actually been able to breath in. Can wear it for some hours till it starts to irritate my face. Usually I am fatigued by then any way. Need to keep it a little bit low and tight around the chin. If you open your mouth for anything even just to lick your lips it can feel loose or break the seal if not snug enough. Pile on the Chap Stick before putting on mask. Also wash your face with moisturizing soap so you don't get a face itch while it's on. Otherwise you may find yourself taking itch breaks where you remove the mask. One more thing -- the screw on filters work great.
Rick G.
2025-08-20 13:45:49
I use this mask along with a Tyvek suit to sand and grind fiberglass. It is absolutely fantastic. The lens is crystal clear and does not fog up. This is one of the best investments I have made in a while.
Andrew
2025-08-12 15:54:13
Good
Raul 77
2025-07-22 16:56:13
It arrived as expected. My brother needed for work in medical setting, and from the minute he got it delivered in a timely fashion, he put it on. Excellent ! It did fit his face, forehead, etc. every part involving fitting worked well. He wears it every time he's going to the Operating Room to do his job, it protects him perfectly in these difficult times we're going through (COVID-19... needless to say).
David
2025-07-11 16:10:30
I have tried various masks over the years with P3 filters but always notice some bypass when working in dusty environments, this is the first time that hasn't happened using the 3M P3 round filters, very impressed.For quicker less dusty jobs purchased the half mask from 3M, same quality and interchangeable filters too.3M technical support is also first class, would recommend.For males, don't forget to shave before using.
Mike
2025-07-03 15:31:03
So far I am extremely pleased with this mask. Wore it for about 6 hours straight in the shop with the bio filters on. No noticeable extra neck fatigue. Extremely happy with the Feild of view! Almost no obstruction of view besides the nose piece. The protective film was a nice bonus. Excellent airflow across the lense. I had no issues with moisture at all. As for size, I got the medium and it fits perfectly. I would hazard a guess that 90% of adult males will be a medium fit. The straps are easy to tighten and release. The only thing I would like to have seen is a cloth bag for storage. At that price I expected to see one.
colin
2025-07-02 11:08:30
Easy fit. Comfy. Does the job well ,
Phil
2025-06-28 14:01:12
I was doing some renovations with asbestos, and along with some P100 filters, this respirator really filters well. Tight fit to the face, and the air breathed in feels very, very clean. I only have one set of lungs, so the price is well worth it.
AlinV
2025-06-20 15:05:24
Replacement for a 6800 clone bought in March, which let's just say, the silicone grade was sub-par and stretching to the point of not providing adequate protection. I have 2 half face 3M masks as well and will never buy a clone again. The real 3M 6800 is by far a superior product in every way, the nose cup rigidity, chin area, and overall feel of the silicone is top notch - don't fool yourself with a clone, get the real 3M (Made in USA); Edmonton Fasteners did a very good job in shipping ultra fast.
Packer Backer
2025-06-10 13:01:37
Bought for husband to use when grinding. Fits snug like it should. Replaced a wore out very expensive unit. Quality seems like it will last.
Doctor Dan
2025-06-05 18:01:23
I recently upgraded from a half mask and goggles to the 3M 6800 full face respirator.The 6800 is way more comfortable, and no fogging, and my eyes are better protected.The only downside is that it is almost impossible to communicate while wearing this mask.The step up to a 3M model with a voice diaphragm is way more expensive, so I am nowlooking into creating a DIY speaking option -- with a mic inside the mask and a smallbattery powered amp / speaker to deliver my voice. Should be fun!
Jeremy
2025-06-02 12:02:32
I use this mask for jogging during cedar fever season in Texas. Superior to everything else I’ve tried like the half mask respirator. This one sits firmly and the field of view is wide open and no fogging. With the half mask my eyes were still get itchy and watery so instead of goggles I went with the full face mask.Maybe I look weird to the other bikers and joggers but that’s a small price to pay for being able to breathe normally during the winter. I thought about trying one of the cheaper options, but then I decided to pay extra upfront because 3M has great engineering. So far it’s worth it for the extra cost for the comfort and how well it works.
dustin perham
2025-06-01 20:53:57
Love it, Great materials. Only wish is it came with a starter pack of screen protectors. (But protectors are easy to find ) However great quality, i use every day
URL Cruiser
2025-05-17 12:58:58
First mask I actually been able to breath in. Can wear it for some hours till it starts to irritate my face. Usually I am fatigued by then any way. Need to keep it a little bit low and tight around the chin. If you open your mouth for anything even just to lick your lips it can feel loose or break the seal if not snug enough. Pile on the Chap Stick before putting on mask. Also wash your face with moisturizing soap so you don't get a face itch while it's on. Otherwise you may find yourself taking itch breaks where you remove the mask. One more thing -- the screw on filters work great.
Rick G.
2025-04-04 14:27:12
I use this mask along with a Tyvek suit to sand and grind fiberglass. It is absolutely fantastic. The lens is crystal clear and does not fog up. This is one of the best investments I have made in a while.
Andrew
2025-03-23 11:39:44
Good
Raul 77
2025-03-06 09:05:04
It arrived as expected. My brother needed for work in medical setting, and from the minute he got it delivered in a timely fashion, he put it on. Excellent ! It did fit his face, forehead, etc. every part involving fitting worked well. He wears it every time he's going to the Operating Room to do his job, it protects him perfectly in these difficult times we're going through (COVID-19... needless to say).
David
2025-02-05 12:58:48
I have tried various masks over the years with P3 filters but always notice some bypass when working in dusty environments, this is the first time that hasn't happened using the 3M P3 round filters, very impressed.For quicker less dusty jobs purchased the half mask from 3M, same quality and interchangeable filters too.3M technical support is also first class, would recommend.For males, don't forget to shave before using.
Mike
2025-02-01 12:28:56
So far I am extremely pleased with this mask. Wore it for about 6 hours straight in the shop with the bio filters on. No noticeable extra neck fatigue. Extremely happy with the Feild of view! Almost no obstruction of view besides the nose piece. The protective film was a nice bonus. Excellent airflow across the lense. I had no issues with moisture at all. As for size, I got the medium and it fits perfectly. I would hazard a guess that 90% of adult males will be a medium fit. The straps are easy to tighten and release. The only thing I would like to have seen is a cloth bag for storage. At that price I expected to see one.
colin
2025-01-26 17:28:06
Easy fit. Comfy. Does the job well ,
Phil
2024-12-29 10:54:21
I was doing some renovations with asbestos, and along with some P100 filters, this respirator really filters well. Tight fit to the face, and the air breathed in feels very, very clean. I only have one set of lungs, so the price is well worth it.
AlinV
2024-12-17 11:56:23
Replacement for a 6800 clone bought in March, which let's just say, the silicone grade was sub-par and stretching to the point of not providing adequate protection. I have 2 half face 3M masks as well and will never buy a clone again. The real 3M 6800 is by far a superior product in every way, the nose cup rigidity, chin area, and overall feel of the silicone is top notch - don't fool yourself with a clone, get the real 3M (Made in USA); Edmonton Fasteners did a very good job in shipping ultra fast.
Recommended Products
