Shopping Cart

Your cart is empty.

Your cart is empty.

3M Double Sided Tape 0.5”×18ft VHB 5925 Black Mounting Tape Heavy Duty Waterproof Foam Tape Strong Adhesive for RV LED Strip Light Décor

5.0 (8) Write Review
Free shipping on orders over $29.99

$7.89

$ 3 .99 $3.99

In Stock

1.Size:0.5''x18 Ft


About this item

  • 【VHB Tape】3M VHB Tape 5925 is a 0.025 inch (0.6 mm) thick black double-coated acrylic foam tape with PE film liner. The modified acrylic adhesive on both sides bonds to a broad range of high, medium, and medium/low surface energy substrates including metals, glass, and a wide variety of plastics and paints, the very conformable foam provides good contact between substrates even when they are slightly mismatched
  • 【Features】Fast and easy-to-use permanent bonding method provide high strength and long-term durability. Creates a permanent seal against water, moisture, and more by offering better gap-filling capabilities. Pressure-sensitive adhesive bonds on contact to provide immediate handling strength
  • 【Multi-purposes】Suitable for solar panels of RV, car holders, LED strip lights, trim, nameplates, address plaques, signs, power strips, mirrors, hangers, toothbrush holders, picture frames, automotive decorations
  • 【Easy to Use】Eliminate drilling, grinding, refinishing, screwing, and welding, this foam tape is easy to install, just peel off the tape and stick it to the surface of the object. Note: Please cut a corner piece of the liner with a knife when it is hard to peel off
  • 【Cure Time】After application, the bond strength will increase as the adhesive flows onto the surface (also referred to as “wet out”). At room temperature, approximately 50% of ultimate bond strength will be achieved after 20 minutes, 90% after 24 hours, and 100% after 72 hours


Product Description

rv 3m tape
A+ 3M 5925
3m tape 5925
3m black double sided tape
double tape apply

clean

CLEANING

  • Quick pre-clean of tough spots if necessary
  • Wet cloth to remove contaminants
  • Final wipe with dry cloth

primer

PRIMING THE SURFACE

  • Apply primer, primer on a towel, followed by a dry towel
  • Dauber bottle followed by a dry towel
  • Foam brush
  • Let dry before taping

apply

TAPE APPLICATION

  • Start the tape at the edge of the surface and lay it down, applying constant pressure as you go.
  • Remove the protective liner to apply the other substrate

pressure

APPLYING FINAL PRESSURE

  • Typically, this is achieved by the application of greater than 15 psi at the tape bond line.
time to cure

Ryan Ren
2025-09-05 12:17:35
As a buyer of the 3M Double Sided Tape 2”×16.4ft VHB 5925, I’m pleased with its performance for mounting my spoiler. The heavy-duty adhesive holds firmly, and the black foam tape blends well with the spoiler, giving it a clean look. It’s also waterproof, which is great for outdoor use, ensuring that it stays securely in place despite exposure to the elements. The tape was easy to apply, and it provides a strong bond that has held up well over time. Overall, this tape is a reliable choice for secure mounting applications and has worked perfectly for my needs.
Anthony
2025-08-28 12:26:48
This is a good deal for a lot of high-quality double-sided tape. As long as you follow the instructions it works extremely well, and the bond it creates with surfaces is almost superglue-esque.
David B
2025-08-10 17:54:28
Very good tape. Used it to apply automotive trim. Worked very well.
zeron-s
2025-06-23 16:10:58
You’ll rip whatever you stick this onto off before actually getting the tape off. I originally bought it for window repair and that’s a bad idea. I couldn’t get it off once it settled on.The stickiness is unmatched. It’s quite soft and malleable so don’t expect it to hold its form under load.Overall, a solid performer but not what I set my eyes out for
Scott F.
2025-06-05 10:37:23
Strong, double sided industrial style and useful Tape.A Small issue but it doesn't stand up as well when in consistently hot environments (such as a Garage at 105+ degrees (F). Also, doesn't adhere well to Vinyl materials (such as those used in a car).
JDM
2025-03-21 15:15:43
Worked great thank you
Greg - Vermont
2025-03-04 16:55:18
Does exactly what you would want from a double contact adhesive !!! Get it right at the start……there’s no repositioning !!!
Scott U.
2025-02-19 14:14:49
I bought an after market CarPlay screen. The mounts that came with it were.... less than ideal in a mini Cooper. I 3d printed a mount that used some open space above the radio info screen and used this to keep it secure. Yup - it works.... No, you can't just pull it off when you get a flat and can't quite get to the hazard button :(I got it off at home and have redesigned the mount to allow for the hazard incase I need it for the 2nd time in the 30 years I've been driving.So... BE CAREFUL, but be confident!