Your cart is empty.
Your cart is empty.Product Description
This 3M Reusable Respirator 7500 Series uses advanced silicone material to help provide comfortable and durable respiratory protection. A unique adjustment design helps reduce pressure points on the face for even more comfort. 3M Cool Flow Valve helps make breathing easier and can reduces heat and moisture build-up for cool, dry comfort. Respirator helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters (not included). When properly fitted and used with approved 3M cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting. NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death.
From the Manufacturer
3M™ Half Facepiece Reusable Respirator 7500 Series helps provide protection against particulates and a wide variety of gases and vapors when used with approved 3M cartridges and filters (sold separately). When properly fitted and used with approved 3M cartridges and filters, this respirator (commonly referred to as a “mask”) helps provide respiratory protection at concentrations up to 10 times the Permissible Exposure Limit (PEL). NOTE: The cartridges shown in photos below are sold separately from the respirator.
Respiratory protection in contaminated sites Respirator is easy to adjust for a comfortable fit Adjust head harness for drop down mode Use with eyewear, hard hats and other safety gearDesigned with the Comfort of the Worker in Mind
This respirator uses an advanced silicone material that provides a softer feel on the face. A unique adjustment design helps reduce pressure points on the face for even more comfort. The 3M™ Cool Flow™ Valve helps make breathing easier and can offer cooler and drier comfort for the wearer. Head harness may be adjusted to drop down when not in active use (allows respirator to be removed without taking off hard hat). The exhalation valve cover directs exhaled breath and moisture downward while helping protect the valve area from debris while also making for easier cleaning. Recommended applications include abatement, painting, welding, chemical handling, construction, utilities, mining, pharmaceutical, and smelting.
Meets Government Safety Standards
NIOSH, a Federal government regulatory agency, has tested and approved the 7500 Series with 3M™ cartridges, filters or supplied air systems to help reduce breathing certain airborne contaminants. This half facepiece respirator may be used with 3M™ Cartridge 6000 Series; 3M™ Filters 2000, 2200, 7000 or 5000 Series; or 3M™ Dual Airline Systems against a variety of gases, vapors, and particulate hazards according to NIOSH approvals.
Importance of Respiratory Protection
Breathing hazardous particles, gases and vapors can be harmful to your health. The 3M™ Half Facepiece Reusable Respirator 7500 Series helps reduce exposure to many contaminants. Enhanced comfort and visibility features make wearing the respirator noticeably more enjoyable.
About 3M Company
For more than a century, 3M has applied innovation and technology to improving our customers’ lives and supporting their business goals. Today the company, from its headquarters in St. Paul, Minnesota, serves industrial and commercial customers and consumers in nearly 200 countries. Personal Safety products, focused on worker safety, include respirators, hearing-protection products, air-monitoring devices, environmental-safety products, and comprehensive training programs. The 3M brand, across thousands of products, represents consistency, superior quality, and value.
Todd J. Toops
2025-08-22 10:17:49
I purchased the 3M P100 professional filters () and 3M P100 Particulate Filters () from Amazon.com to use with this respirator. So far, I've used this mask for the following:--yardwork (mowing/trimming/leaf blowing 1/2 acre lot)--sanding some drywall in our basement (with limited access to ventilation)--cabinet sanding/priming/painting (ditto on the ventilation issue)--outdoor allergen barrier in the late spring.So far, it's performed really well for all tasks.Pros:--All straps are adjustable, so it should fit most heads pretty well. The straps that fit around the upper cranium are flat enough that I can still wear my sunshade hat over it. The strap that goes around the back of the neck/lower part of the head is pretty standard and necessary if you don't want air leaking in around the chin.--The mask is air-tight around my cheeks and nose. I've had issues with other respirators because my cheeks are kind of hollow and it is hard to find a respirator that conforms to the shape of my face without leaving deep dents over my nose and cheekbones. This respirator has a rubber gasket-like material that helps with the seal against the face and keeps the mask from leaving crazy dents all over your cheeks and nose after you remove it. There were a few marks, but nothing like the plastic-surgery-gone-wrong/Frankenstein's-monster issues that some of my other respirators have had.--Ditto Rachel Levine's earlier review regarding vents: the downward venting design does a good job of preventing fogging of glasses and goggles.Cons:--The rubbery gasket next to your face on the mask causes it to slip a tiny bit when you sweat. I wore it while priming in the 80 degree garage for about 1 hour and had to keep adjusting it because it wanted to slide down a few millimeters from all the sweat. I didn't have this problem when I was working outside in 65 degree weather (not sweating).--The mask is a little heavy for a 5'4" 130lb female, but not uncomfortable. For people with stronger neck/face muscles, this wouldn't even be a consideration.Solid 5 star recommendation for this product.
Rolidnot
2025-05-16 17:19:55
I use this respirator with 2091 particulate filters for woodworking, yard work, leaf cleanup. The respirator does NOT come with any filters so be sure to order them with the mask if you don't already have them on hand.The mask fits well, the large was a good size me because I'm a big guy at 6'1" and 205 pounds with a round face. Its comfortable in temps to 80 degrees, after that, it gets warm. But it's fall in the Northeast and its leaf season which makes for dusty, dirty work and this mask keeps leaf dust, mold and pollen out of my respiratory tract.The material is soft, comfortable, conforms to my face and seals well and the 2091 filters are great for fine dust.I wish the neck strap was about 2 inches longer, it's a bit tight for me fully expanded. Otherwise, this respirator is ideal for my purposes.
Will
2025-05-03 14:08:18
I did alot of research and read alot of reviews before purchasing this specific respirator. I was looking for something that I could wear for maybe 3-4 hours at a time while doing some woodworking and painting. It was important to me to have a good fit, one that was lightweight, comfortable, and hopefully easy to breathe in. My only experience with any kind of face masks prior to this one were the disposable kind that we have all been wearing for the past few years.I was SO impressed when I installed the filters and tried this on. Breathing was very easy - fresh air filled the mask when I would breathe in, and the mask did not feel stuffy or humid when breathing out. This was a night and day experience when compared to the disposable kind. I guess I had assumed that since this mask covers the entire nose and mouth (with a silicone seal), that breathing would feel uncomfortable and difficult - but I was so wrong. Additionally, I usually have some stubble / a short beard and this mask still formed a great seal. I would NOT recommend using this mask WITH facial hair in any environment with dangerous / hazardous materials, but for me - doing some light woodworking and painting, I had no issues whatsoever. I knew the mask was working when I would take it off, and I would be immediately hit by the smell/fumes of whatever I was working with, meanwhile when I had the mask on, I never smelled a thing! I also love that this face mask can be washed with soap and water, because I definitely want to be able to was this periodically if I'm going to be spending so much time breathing through it.As for sizing, I went back and forth between trying to figure out if the medium or large would be better for me (adult male, 30s, 5'8", size M clothes generally). I think I read in some materials from 3M that approx. 90% of adults would wear a size M in this mask, so I decided to just risk and go ahead with the Medium - it turned out to be perfect. I don't know how large a L actually is, but the fit of this mask from the bridge of my nose to under my chin fits like it was molded for me. Very happy with how the sizing turned out.Lastly, and most importantly, make sure you buy the correct bayonet filters for whatever application you are using this for. That seems basic, but I'm sure that lots of people don't realize that some filters are just for dust (not gases), and then the filters for gases have different degrees based on the environment you'll be working in / the chemicals you're working with. This mask won't be any good to you if you don't buy a filter that protects you from the substance you're working with. I hope this helps you!
Stanley NC
2025-04-27 10:03:59
More better than the previous model.
Funky Family
2025-04-09 17:29:10
Worn it for welding and metal melting so far and found it to ne confortable. I kept it for 3 hours straight without feeling the need to remove it. Great fit for large faces.
Stefano Erbetta
2025-04-03 10:44:09
Ha sido comprada por el tema del Coronavirus porque las demás mascarillas de cartas eran demasiados caras y sin sentido vaya. Esta es muy cómoda y protege muy muy bien, es praticamente eterna si se cuida y limpia. La ventaja de poder montar cualquier tipo de filtros no tiene igual....a mi ha sido genial.
AG
2025-01-26 16:24:42
Make sure you are clean shaven to have this work properly! Be sure to perform the seal test prior to using. This mask fits well and is easy to put on. Using it with my glasses was a bit awkward but after a while you get used to it.
vdph
2024-12-11 16:58:54
All parts of the mask in contact with the face are silicone rubber(unlike the cheaper 6000 series) so feels very soft and comfortable.I have a large head do i was doubting whether medium will fit me, fortunately it fits perfectly.From area between eyes to the chin the mask measures around 13cm.across from cheek to cheek around 12cm.you can use this as reference while buying (medium size)I used it with 2091series p100 particulate filter.i used it to clean an old dusty room.wore continuously without any discomfort around 2hrs.You have to buy filter catridges separately.So best to buy this 7000 series instead of the 6000 series really worth the extra price.
Recommended Products
$26.99
$ 13 .99 $13.99