Shopping Cart

Your cart is empty.

Your cart is empty.

45KG High Torque Servo 8.4V Coreless RC Steering Servo Motors Stainless Steel Gear Low Profile Waterproof for 1/8 1/10 1/12 Scale Cars DIY Robotic - 180 Degree

Free shipping on orders over $29.99

$33.99

$ 16 .99 $16.99

In Stock

1.Size:25kg Pro


  • 【Widely Used】: DS3245SG 45kg Full Metal Gear Standard Servo Suitable for RC Off-road Vehicle, Crawler, Mechanical Arms, Robots, Remote Control Boat & Giant Scale Aircraft etc.
  • 【Great Heavy-Duty Servo】: Amazing Torque & Fast Performance, Perfect for Heavy-duty RC Vehicle, Maximum Torque Can Up to 51kg.cm(708.2oz-in),Speed sec/60°:0.11@8.4v
  • 【Reliable Quality】: Equipped with High-precision Steel Gear and Potentiometers , High-resolution Digital Chip, Waterproof Rubber Seals Screws, Made of First-grade Material and CNC Aluminum Middle Shell Ensure Stable Performance and Long Working Life.
  • 【Best Upgrade for your RC Rigs】: Durable, Responsive, Strong Anti-interference Ability, Low Noise, Fast Heat Dissipation.Precision Control, Angle Range from 0 to 270 Degrees. Can be Rotated within 360 Degrees when Power Off, Perfect for Robot Joint Activities. Up to 45mm Long Wire. Free 25T Servo Horn and Accessories
  • 【Satisfied Customer Service】: We Are Specialized in Developing and Manufacturing Robot & RC Servo, We Offer Value Price for Bulk Order. If Any Problem with Your Servo or Anything We Can Help, Please Do Not Hesitate to Contact with Us, We Will Try Our Best to Solve it Efficiently.


Electrical Specification:
Operating voltage range: 5-8.4 Volts
Operating speed at no load ( 5V ): 0.18 sec/60°
Operating speed at no load ( 7.4V ): 0.13 sec/60°
Operating speed at no load ( 8.4V ): 0.11 sec/60°
Stall torque at locked ( 5V ): 35kg.cm(486oz-in)
Stall torque at locked ( 7.4V ): 46kg.cm(638.8oz-in)
Stall torque at locked ( 8.4V ): 51kg.cm(708.2oz-in)
Stall current at locked ( 5V ): 3.5A
Stall current at locked ( 7.4V ): 5.2A
Stall current at locked ( 8.4V ): 5.8A
Idle current at stopped (5/7.4/8.4V): 5mA
Control Specification:
Control System: PWM (Pulse width modification)
Pulse width range: 500-2500μsec
Neutral position: 1500μsec
Running degree: 180° (when 500-2500μsec)
Dead band width: 2μsec
Operating frequency: 50-330Hz
Rotating direction: Counterclockwise (When 1500-2500μsec)
Product Specification:
Suitable for: for 1/8 1/10 1/12 Scale RC Cars, Trucks
Motor Type:Coreless Motor
Gear Type: Stainless Steel
Spline:25 Tooth
Gear ratio: 342
Bearing:Double Bearing
Waterproof Performance:IP67
Connector Wire: 17.7in (450mm)
Size: 1.57*0.79*1.59inch(40 * 20 * 38.5mm)
Weight: 2.11oz (60g)
CE /RoHs: Yes
Apply Environmental Conditon:
Storage Temperature Range:-30°C~80°C
Operating Temperature Range:-25°C~70°C
Packing List:
1 x DS3245SG 45kg Servo (180° )
1 x 25T Adjustable Metal Servo Arm
1 x Accessories Set (As Shown on The Picture)


Kyle
2025-08-05 10:05:23
Added this to my new 3s truggy build and it works great. Very responsive and 7.4v. Was ok at 6v but sluggish. For the cost it’s a great budget servo. A little big but still fit fine and easy to use.
Fish n Pole
2025-07-27 15:16:02
So far I am impressed. TRX4 F150 High Trail is a big girl, tops the scales at 12 pounds. Servo is fast and turns the meaty bead locker wheels with weights with ease. Included servo horn looks strong. I will put it to the test this weekend and edit the post if needed.
Not Enough Chickens
2025-07-26 15:41:51
Put this into my Traxxas Slash after ruining the old one. Absolutely love this servo. Very responsive and for the price you can’t beat it. Fits in very nicely and the blue coloring actually matches my truck. Would definitely recommend to anyone.
Kukoc K.
2025-07-17 13:17:35
So far so good - Fit good in Traxxas Hoss. It has 10x the power of the stock Traxxas 120oz Servo - 120oz only equal to barely 4KG. This is 35KG. No brainer. Has decent speed as well.
Hellrazor
2025-05-25 12:26:37
Great servo, have them in a few of my rigs, easy to use, value for the money, power is grate, and fit good
Jude Nihart
2025-05-16 18:20:46
Strong output and great quality
Phil
2025-04-20 12:43:47
This has worked well so far on the trx4 sport. Much stronger and faster than stock. I run it on 6 volts, so that isn't a fair comparison really. I grabbed 2 incase this one fails me mid hike
Customer
2025-03-16 13:14:47
Purchased this servo to replace the stock slow performing one on the Arrma senton. It does produce more torque but it's not much faster than the original one. Good value for the money
Roger Elliott
2025-03-15 10:14:48
Good value for a solid strong RC servo.
Duane
2025-03-13 12:39:03
installed this in a TRX4 on Traxxas Traxx and so far it has held up to the weight. not the fastes butfaily fast, and for the price its a suitable choice. Runnig in Snow has not caused any moisture issues, seems to be water tight. will purchase again.
Leon Dwenger
2025-02-20 14:40:04
Kann ich jeden empfehlen kann man immer wieder kaufen
Barry
2025-02-16 14:57:06
I have this on Hobbywing Fusion Pro 2300kv and i suggest set BEC to 7.4v. Excellent power and speed for 5lb crawler. I have the 35kg pro version on Element Ecto and it is still going strong even after 20ft roll overs.Note: make sure you apply stronger thread locker on the screws if you don't use the stock servo arm. The vibration would loosen it and grind out the teeth of the servo arm. Thank you for reading.
TriceRs
2025-02-01 11:06:46
J'ai acheter ce servo pour mon Xmaxx est il n'est pas assez performant, j'ai trouver un autre servo su même kg et fonctionne très bien
Recommended Products