Your cart is empty.
Your cart is empty.Product Description
- Never needs lubrication
- Made of the toughest CPVC material
- Easy to operate with the turn of a handle. Adjustable stop or diverter feature that allows for flow adjustment
- Handles flow rates up to 170 GPM with minimal head loss
- Designed for easy automation
- Proprietary NeverLube technology
Jason escoe
2025-09-03 11:49:20
No dislikes, plumbed valve in on my inlet side of pool filter! Cartridge filter setups aren’t normally plumbed with a bypass valve, as a multi port valve has!!
Casey H.
2025-07-12 13:02:23
It work really good if you are using the glue on the outside of valve, but inside is really bad. You cannot push the pipe enough to make a good glue surface, the most you can get is less than 1 inch and you must push your pipe hard to get that. It has a slopped surface inside that prevent any pipe from being pushed enough to get 1 1/8 or 1 3/16 gluing surface. I think I only could get 3/4 to 7/8 which is weak for pressure line I believe.
bop
2025-04-25 10:10:18
Stay away from these valves. They are very hard to turn. I believe the tolerances are off.
Phil Bosche
2025-03-19 14:34:10
I'm sure this valve is great if you're planning on using it with a spa or when all three ports are OK to be 'wet', but don't plan on using it to winterize an accessory (ie pool heater) and you have the threat of freezing. Going to be cutting it out and returning.
Steve Spinks
2025-02-09 15:35:12
Pvc doesn't fit inside valve like the big brand name valves. I did get them to seal.
Recommended Products
$27.50
$ 13 .99 $13.99