Your cart is empty.
Your cart is empty.
JoyNano - Enjoy Gadgets and Electronics
Description:
1. The JoyNano 24V 20A Switching Power Supply is large electronic devices that operate on 24VDC and require less than 480W of power.
2. Constant voltage output to ensure the stability of the power supply. Efficient and low temperature work.
3. Input voltage 110V/230V is selected by the switch. Before powering on please check the input voltage avoiding damage.
4. Protection Safety: Overvoltage protection, short circuit protection and overload protection. Hiccup mode, automatically recovers after the faulty state is removed.
Features:
Input voltage: AC110V/220V.
Output voltage: 24V DC.
Output current: 20A
Power: 480W Max.
Screw Terminal Number: 9
Cooling: By Built-in DC Fan.
Shell Material: Aluminum Housing
Dimensions: 215 x 110 x 50 mm (L x W x H) 8.5 x 4.3 x 1.9 inches.
Net weight: 860g 1.9lb.
Wiring:
L, N, GND: AC power input
+ V: DC power output "+"
-V: DC power output "-"
+ V/ADJ: fine adjustment of the output voltage.
Environmental requirement:
Operating temperature: -10 to 50°C
Storage temperature: -20 to 60°C
Ambient humidity: 10-95%
Use:
Power Driver Switching for CCTV Monitoring, Industrial Automation, CNC Stepper / Servo System, LED Display, Stage Lighting, Communications, Network, etc.
Package includes:
1 x JoyNano 480W Power Switch 24V 20A
Jerry Rutherford
2025-09-05 17:21:06
This is my CNC go-to power supply. I have several.
Matthew Whited
2025-07-17 13:03:25
It works very well for my 3D printer. Only issue is the fan is very loud and always on. It would ne nice if it sensed load or temperature to control the speed.Update, because I want to leave this power supply always on but not leave the fan screaming when not needed I pulled the cover (which has big letters saying the fan is thermally controlled.) The thermal controller was not populated and was bypassed to be always on. If they are going to cheap out and exclude the temp controller from the fan they could at least skip on the cover stand that says "NOTICE: This power supply is built-in fan on/off control circuit. fan automatically works according to working temperature."Anyway... if you wonder why the fan isn't thermal controlled its because the didn't install the components.
Richard Bailey
2025-06-23 10:02:21
Works great, would buy for other projects
Kristy
2025-06-22 10:33:37
It hums all the time. It didn’t do it at first but now it is. Even when the lights are off it’s humming away.
EMFab01
2025-06-14 16:41:10
worked Great thanks
Jim Tellier
2025-06-02 11:28:32
Would have been nice to see a mounting template, or at least spec drawing of mounting dimensions; other than that, this seems to be ok so far. Haven't pulled more than a few hundred mA out of it yet, but it seems stable. The voltage adjust trimpot is a bit awkward to reach, but not terrible.I'd recommend this, especially for the price.
Angel W.
2025-05-28 16:47:27
Thanks
Scott
2025-05-19 10:34:17
Power supply works as listed but the cooling fan is very loud and cycles on for 20 seconds and then off for 40 seconds. Do not install in living area.
pasquale zitiello
2025-05-07 14:55:19
Avec cette pièce j’étais heureux de faire mes modifications une machine à souder qui était possible de réparer merci cinq étoiles
Sean
2025-04-24 14:52:16
Just as Advertised
Michael Reinemuth
2025-03-03 14:13:02
Für Netzteile dieser Bauart gibt es viele Hersteller, leider meist in sehr durchwachsener Qualität. Nach einigem stöbern hab ich mich für dieses Netzteil entschieden. Es soll in einem Geeetech A30 als als Ersatz für das defekte Original-Netzteil zum Einsatz kommen. Der erste Eindruck bezüglich Qualität nach dem Auspacken ist sehr gut. Das Netzteil kommt in Folie eingeschweisst und in Umverpackung plus einem Datenblatt. Kein losen Schrauben zu hören, wie das häufig der Fall ist, auch das Finish macht einen guten Eindruck, was auf ein sorgsame Herstellung schliessen lässt. Beim einem Ersten kurzen Check meisterte das Netzteil seinen Job problemlos. Wunderbar :)
Moyenneorque
2024-12-06 13:58:49
Non fonctionnel pour la u20Erreur de ma part
Cliente
2024-12-05 21:04:19
Si è rotto dopo poche settimane di funzionamento si è bruciato il fusibile 220v 5A che alimenta il primario, non ho aperto la griglia per non rimuovere la protezione e perdere la garanzia inoltre il fusibile è saldato sulla scheda dell'alimentatore.
Recommended Products
$21.37
$ 10 .99 $10.99
$63.33
$ 24 .99 $24.99