Your cart is empty.
Your cart is empty.Product Description
Multi-Brand Compatibility
- Compatible for Cisco SFP-10G-LR,Ubiquiti UF-SM-10G,Netgear AXM762,D-LINK DEM-432XT-DD,TP-LINK TXM431-LR,Zyxel SFP10G-LR,Qnap Nas SFP+,Mikrotik S+31DLC10D and other open switch with 10G sfp+ port.
- NOT compatible for HP-H3C, Intel, Arista, Mellanox, Dell Force10, Extreme, Brocade, Juniper
How to Install SFP Module
Step 1 : Remove the SFP module from the antistatic pakage.
Step 2 : Insert the SFP module into the SFP module port untill it is in the top position.
Step 3 : Remove the protective cap from the fiber optical cable port.
Step 4 : Connect the optical fiber cable to the installed SFP module,check the LED on the switch module.
10GBASR-LR SFP+ Module
- Wave Length: 1310nm
- Reach: 10KM
- Fiber Type: SMF
- Tx Power(dBm): -6.5~-0.5
- Rx Sens.(dBm): ＜-14.4
Low Power Consumption
- Power consumption is less than 2.5w, with superior heat dissipation to ensure stable signal, fast transmission, stable operation and superior performance
Professional Manufacturer
Providing high reliability and cost-effective interconnect solution for data centers and operator with optical modules and Cables (1G/10G/40G/100G)
Focus on Optical Module R&D
Devoting to providing customers with best shopping experience, best product installation performance with a perfect compatibility and superior quality
GR468 Reliability Test
All modules will be verified by temperature cycling, mechanical vibration, accelerated aging, damp heat test, to ensure the performance and stability
Worldwide Sales
We offers products and services worldwide, cooperating with partners over 150+ countries in 6 continents via unique B2B/B2C e-business platform
Pariah Zero
2025-08-08 14:26:54
The title says what needs to be said - they're reliable, deliver the rated speed, and don't break the bank. Great for rewriting my home to 10 gigabit.
Edward W.
2025-05-28 21:27:02
What else can I say? They absolutely work. I hot swapped them into switches. They came right up and the switches properly identify them. I am using short (6 inch) to longish (300 feet) with great performance. My core switches (2 of 8×10GbE SFP+) run VERY hot (I'm really not overstating the temperature) and I have had no issues with these SFP+'s. No drops, errors, etc. I bought more of these so that I am using them everywhere possible in my LAN. I would buy more as needed.
Jay
2025-05-25 18:19:10
I bought three packages of these for an upgrade of my home network from 1Gbps to a mixture of 2.5Gbps and 10Gbps. I have paired links from two servers and single links from my two desktops plugged into my Terow replacement switch, and am very happy with the speed increase I am seeing. Transfers are now basically limited by the speeds of the SSDs I am using.
Evadman
2025-05-04 11:47:37
Connected a 1GB SFP port on a TP-Link ER707-M2 router/gateway [B0C238XMVV] to the SFP port on a Yanley 11 port POE switch [B08PJPX47D] via 3' OM3 fiber.Used the other pair to connect a TP-Link TL-SX300 10GB switch [B0973T7BGL] to a TP-Link SG3218XP-M2 2.5GB PoE switch [B0CXLR9MQL] on the 10GB SFP uplink port via 3' OM3 fiber.This was my first foray into 10gb fiber, and it went without issue. Immediate plug and play in both cases; no config needed. No issues in about week.
Just Me
2025-04-26 15:01:56
None of these will work with our equipment. Meraki router and lumen fiber connection. They work fine with Cisco, but not with these.
AZOnIT
2025-04-22 17:19:06
I used these in a QNAP QSW-408 and no-name intel 82599. They worked perfectly in both with no issues.VERY IMPORTANT:These are for use with single-mode LCLC cabling. Use of multi-mode cable may work(ymmv) but is not optimal. Despite being called out as LR (Long Range) these can be used for short cables and long, so long as the cable is single-mode.Not a hard fast rule, however Aqua colored cables are generally multimode of size of 60 or 52 micron and can be driven with LED based sfp(+) optics. Yellow cables are generally single-mode with a core of ~9 microns and must be driven with a laser at at least 1310nm. Due to the high frequency of the signal, and reduced surface are of the 9 micron cable single-mode connections can traverse a few feet to many miles. Multimode is much more limited.
Gail S.
2025-04-11 11:20:29
I needed these to modules to use my RJ45 CAT6 ethernet cables for the 10GBe network switch. Simple to install and they work great.
Steve S
2025-03-30 15:51:34
if you want to save hundreds of dollars on your optics, these are the way to go. I'm also a fan of their 10GBaseT adapters and MMF adapters. using them for all my gear these days.
Arjan Hes
2025-03-25 13:22:02
Product naar behoren, levering zoals aangegeven.
Christoph Polkehn
2025-03-18 13:10:24
HalloIch habe diesen Transceiver bestellt und ausprobiert, und ich meinte er funktioniert nicht.Nachdem ich dann das Original von Ubiquiti hatte, und diese auch nicht funktionierte habe ich mich auf die Suche gemacht.Das Problem ist, dass die SFP Ports nur 1Gbit/s können. Ich habe aber versucht dort zwei 100Mbit/s Geräte anzuschliessen.Somit gehe ich davon aus, dass dies Transceiver genauso funktionieren, wie die Originale.
Cliente
2025-03-17 14:30:22
Installato e funzionante. Tutto ok. SFP - 1000Base-T
Julien BOULAND
2025-03-13 18:59:55
Bien, et en cas de soucis support efficace.
Christoph Nelles
2025-02-11 12:00:52
Läuft ohne Probleme in Mikrotik CSS326, Mellanox ConnectX-3 und Intel X520-DA1.
Recommended Products
$34.67
$ 16 .99 $16.99