Shopping Cart

Your cart is empty.

Your cart is empty.

4Pack MG996R 55g Digital RC Servo Motors High Torque Metal Gear Servo for RC Car Robot Boat Helicopter

4.6 (11) Write Review
Free shipping on orders over $29.99

$16.99

$ 8 .99 $8.99

In Stock

1.Size:Mg90s X 5


  • The MG996R servo motor offers an increase in speed, tension and precision over the SG90 and MG90S micro servo motors. This high-speed standard servo motor can rotate 180 degrees (90 in each direction).
  • MG996R is compatible with most standard receiver connectors, suitable for Futaba, Hitec, Sanwa, GWS, etc. It is a digital standard servo with excellent performance.
  • MG996R servo torque is 6V 12 kg·cm, 7.2V 13 kg·cm. Operating speed: 4.8V no-load 0.17s/60 degrees; 6.0V no-load 0.13s/60 degrees. Recommended voltage: 5V, current use: 3A.
  • Stable anti-vibration coreless motor, metal gear, longer service life. External adapter power supply, cable length: about 30CM. Wiring: orange: signal wire, red: positive pole, brown: negative pole.
  • Widely used in biped robots, mechanical arms, remote control boats, suitable for 50-90 methanol fixed-wing aircraft and 26-50cc gasoline fixed-wing aircraft and other models.


Product Description

C062
C062

Specification:

  • Dimensions: 40mmx20mmx43mm
  • Gear: full metal gears
  • Operating Voltage: 4.8-7.2V
  • Stall torque:9.4 kg·cm @ 4.8V, 12 kg·cm @ 6V , 13 kg·cm @ 7.2V
  • Operating Speed: 0.17sec/60°(4.8V no load), 0.13sec/60°(6.0V no load)
  • Running current: 220±20mA(4.8V no load), 250±20mA(6.0V no load)
  • Control System: Change the pulse width
  • Amplifier Type: Analog controller
  • Dead band width: ≤5 μ sec
  • Rotation angle: 180 degrees
  • Plug type: JR, FUTABA universal
  • Wire length: 300mm（11.8 inches）
  • Structure: metal sawtooth, coreless motor, double ball bearing
  • Wiring: orange - Signal wire, Red - Positive, Brown - Negative
MG996R

  • Scope of application: Biped robot, mechanical arm, remote control boat, suitable for 50-90 methanol fixed-wing aircraft and 26-50cc gasoline fixed-wing aircraft and other models.

  • Package include: 4 x MG996R(with parts)

MoYeniRo
2025-09-06 13:11:52
these "Metal Gear" Micro Servos are great for projects requiring higher torque where plastic gears might strip. They worked great in my project to make a smart plunger stop lift for a water tank! They work using 5 Volts and could be wired directly to an ESP32. They each were packaged with 3 different lever arms and mounting screws to get the project going!
Petronio
2025-08-17 16:27:14
Calidad y entrega a tiempo
Mr MR D
2025-07-29 12:31:32
Asa expected - metal gears :-)
KT
2025-07-19 18:32:21
Great servo, only thing is the case is 2mm deeper than other micro servos, so it touches the suspension links. But they were not sold as scx24 servos, I just know there are a lot of scx24 builders that may want these. Over all they work great.
William OBrien
2025-05-17 10:35:35
Cheap and effective
Aardvark
2025-03-28 18:06:31
They do the job. No negatives to report. I would buy them again.
Zack Farnham
2025-03-01 12:14:23
Nuff said. All worked.
Josh
2025-02-15 16:10:39
Not a 5v motor. The description quotes a speed at 4.8v but it doesn’t move at all with 5.0v. After testing with multiple bench power supplies they start moving at 5.7v minimum.
John Doe
2025-01-22 11:08:32
These can easily be modified for 360 continuous rotation, note that there is no stop pin in the servo output shaft gear. If needed spray some WD40 into the gearbox.
Alex
2025-01-03 13:27:26
4 out of the 5 in the pack worked and the last one didn't even seem like it received power. The others work fine and to the specs listed but I can't give this pack 5 stars seeing as how I've only got 4 usable products out of 5 that I've paid for.
antedeluvian
2024-12-29 13:56:08
I ordered this part as a replacement for a generic MG996R. The depth is different to the orginal part and does not fit into the meatl framework which means it must be non-standard. I will be returning it.