Your cart is empty.
Your cart is empty. Specifications:
Bulb Type: 1157/BAY15D
LED Lifetime: 30,000+ working hours
Bulb Dimensions:1.7”(4.4cm) *0.75” (1.9cm)
Color Temperature: 630 nm brilliant red
LED Type: 2835 SMD
LED Amount: 24 LEDs
Beam Angle: 360 degree
Output: 2.5 Watts
Operating Voltage: 9-30 VDC
Operating Current: H:200±20 mA 12V, L:70±10 mA 12V
Replaces OE bulbs #: 1016 1034 1035 1157 1157A 1157ALL 1157LL 1157NA 1178A 1196 2057 2057A 2057ALL 2057LL 2057NA 2357 2357A 2357ALL 2357LL 2357NA 2397 2397LL 3496 3496LL 7528 7528L 94 BAY15D etc.
Applications: Brake Lights, Tail Lights, Turn Signal Lights, Center High Mount Stop (3rd brake).
Please Note: Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
Features:
-Just plug and play, no modifications to your vehicle are necessary for installation.
-Almost the same size as your original incandescent bulbs, fit into the lamp housing perfectly.
-3.5W high intensity and 0.9W on low, huge brightness difference which is great for dual-function on one same bulb application such as brake/tail lights.
BRISHINE is a professional large-scale manufacturer of all types of LED lighting products and HID lighting products, integrating development and production together. We have many years of history in the auto light field. All our items are covered by 1-Year warranty and we offer friendly 24h customer service, please feel free to contact us if there is any question or request.
Serg.O
2025-08-09 15:17:28
These LED lights are excellent as automotive rear tail lights, brake light and front blinkers. The red is brilliant, glad I picked the red for the rear and amber for the front. I have a happy 1969 Camaro.
Dragon Vance
2025-07-22 14:07:48
I got these to upgrade my 2357 brake lights to LED. Easy to install and very bright. Works great, highly recommend.
Joe H
2025-07-17 11:43:29
Low intensity is a tad brighter than a new 1157A L L hallogen. High intensity was about the same. There's a good difference between low and high intensity. The bulbs appears to be well constructed.Power consumption was 0.05 on low intensity and 0.22a on high intensity.A 1157a LL halogen bulb uses 0.5a on low intensity. 1.8a on high intensity and 2.2a with both elements lit.These LED bulbs seems to be about 10x as efficient as new 1157a LL halogen bulb and a tad brighter at low intensity. The efficient may positively affect longevity. Will need to wait and see.If you're looking for super bright this isn't the LED bulb you want. It has a little better visibility than a 1157 halogen bulb on low intensity. If you tend to leave your parking lights on they may help avoid a dead battery.I use LED bulbs as the flashers bulbs so they can a operate time a long time on battery power and super bright white LED bulbs backup lights for visibility.I haven't had any problems with the larger LED bulbs other than some not fitting the socket properly or a too small a difference between low and high intensity.For the smaller bulbs I've had better luck with COB LED bulbs. The others tend to burn out quickly and/or flicker.
Jer
2025-05-22 11:23:33
This bulb replaced the 2056 bulb. These are two contact bulbs. There's a bright element and a dimmer element in each bulb. In my HR motorhome, the turn signals only use the brightest element. I'm not sure why they didn't use the 1156, single contact, since the light is only used for turn signals (amber), with the tail and brake lights being red, and using a different lens. The bulbs fit a bit tight. I didn't think I'd get them to "locktwist" in, but extra effort pushing did the trick. They are brighter than the incandescent bulbs. They also have the end cap LED's as well as the circle of LED's around the bulb. So far.....I recommend them.
grandpa steve 47
2025-04-18 13:56:31
Used on my 1966 El Camino, very bright good for safety with to days drivers
Michael L.
2025-04-17 13:53:37
Bulbs stayed on with a dim glow when switch was off and would not blink with power. Reached out to customer service and received no reply after 3 days. Returned!!!
christopher s.
2025-04-13 10:43:24
The media could not be loaded.
RareBear
2025-01-20 10:00:00
I am using these LED's for turn signals on the front of a bike trailer. One of the two in the package works fantastic. The other one was failed out of the box. I ordered an identical replacement. I'll give another review once the replacement is received and installed in the application. Hopefully the replacement works as impressively as the original good one.
Recommended Products
