Your cart is empty.
Your cart is empty.Product Description
4PC Set T-Slot Nut Black Oxide Finish 1/2-13 Threads Table Slot 5/8
- 1018 Steel,Black Oxide Finish
- 1/2-13 Threads, Table Slot Size 5/8"
- Base Size (In.) 0.985"x1.120" , Height:0.609"
- 4Pc per order in one Package
4PC Set T-Slot Nut Black Oxide Finish 1/2-13 Threads Table Slot 5/8
- 1018 Steel,Black Oxide Finish
- 1/2-13 Threads, Table Slot Size 5/8"
- Base Size (In.) 0.985"x1.120" , Height:0.609"
- 4Pc per order in one Package
4PC Set T-Slot Nut Black Oxide Finish 1/2-13 Threads Table Slot 5/8
- 1018 Steel,Black Oxide Finish
- 1/2-13 Threads, Table Slot Size 5/8"
- Base Size (In.) 0.985"x1.120" , Height:0.609"
- 4Pc per order in one Package
Hillbilly Bob
2025-09-05 11:56:58
these t-nuts fits my mills t-slots and the threads are thru witch I like so it wont mess up the threads on the studs for one and two, quick tar downs or setups changeing out setups or cleanups on machine with no hassels trying to take apart do to jammed stud in t-nut.
GIBBS411
2025-08-16 16:11:17
Works like it should.
John B.
2025-08-08 11:12:57
Functional, but only after putting a file to each end to remove burrs.Accurate size, good thread.
History Buff
2025-07-28 12:54:56
I needed these to secure my drill press vise on my 50 year old Craftsman drill press. The cast iron table has 5/8" slots. These T nuts fit the slot perfectly. As noted by another review , the threaded holes have a stop at the bottom so the bolt cannot go all the way through. O I needed to use different lengths of bolts with different hold down clamps as well as the vise. I ran a 1/2-13 tap all the way through each nut. They work great now for all the different setups I want.
Lars Tenpas
2025-07-27 15:07:47
Liked quick delivery, used on my milling machines
leprechan
2025-07-24 17:15:14
A ok
MacAttack
2025-07-19 13:49:03
I bought these to work with my Craftsman drill press.They fit right into the T slots. They are tapped with 1/2×13 threads. The bottom of the threaded holes are crimped to avoid bolts jacking through the nuts and damaging the T slots.My vice is now secured without using C clamps!
Steve wilson
2025-04-25 17:04:47
these are good quality but hard to grind on if you buy them to big
Erik Fabián JSC
2024-12-04 10:55:35
Los acabados no son los mejores
Recommended Products