Your cart is empty.
Your cart is empty. Glass Filled, Material: PA.
2x1.23x0.54in Diameter Spiral Balances.
Pivot Lock Shoe for Spiral Balances.
Tilt Window Design.
You will get: 4pcs tilt window accessories.
Thomas D. Cyr
2025-09-06 15:21:55
Worked great would buy again
CBuck
2025-08-31 10:49:40
I had to modify the coil spring to work but these put new life into my vinyl windows. Windows work better than before.
Link
2025-08-26 10:58:15
Fits my steel windows from 1960s.Only issue is central blue plastic fitting does not rotate easily making it hard to put window back in frame.
Jeffrey Shoe
2025-08-12 15:11:32
Most of my 25 years windows would not stay open due to damaged sliders . I could not find these parts in my local stores like Home Depot or Lowe’s . These were a great price and they arrived fast . All my windows work and slide perfectly now after installing the new sliders . I should say that it did take a long time to install them for my windows . I had to cut the top track to remove the old ones and insert the new ones . It was also a bit tricky getting the tension on spring rods again and aligning the windows . I ended up buying 8 of these . Two per window . It took a few days . But saved me a ton money doing it myself . Included in this time I replaced the glass windows too that leaked gas and fogged up . I replaced three pieces of glass that I got from a local glass company .
Robert J.
2025-08-05 17:02:53
worked fine
Russell H. Booth II
2025-07-19 10:00:38
Worked well with my window.
Bradley
2025-04-30 15:37:57
There is a detachable plastic part on the back that prevents the shoe from turning easily, however after removing it the shoe seems to work fine. Not sure if this is the correct installation as there were no instructions included
jip55
2025-04-05 17:36:27
Works okay for now. Longevity will determine my rating in the future.
Susan
2025-03-09 10:39:12
Good product
David D.
2025-03-07 15:19:11
great product works fine looked hard to get it .ThanksDavid
Darrell
2025-02-27 12:45:06
These parts fit perfectly, but after fighting to get the window back into the frame, I changed the process and removed the locking blocks. That way, its easy to tip the window sideways to hook in one side and then the other. In my case, the locking blocks are completely unnecessary. The work is a pain, but after doing a couple of windows, I goth the procedure down to about 20 minutes each. My 30 year old windows are sliding great again. I'm hoping these parts will stand up for years to come.
Customer
2025-01-16 13:28:20
It does the job. Futs very well.
Tom Butler
2025-01-11 10:04:00
Worked perfect
Recommended Products
