Your cart is empty.
Your cart is empty. Cionyce is a company that pursues high-quality products and takes pride in customer satisfaction, and strives to provide the safest, most satisfactory and most convenient shopping experience for our customers.
Cionyce 5 PCS M10 T-Slot Nut, Black Oxide Finish Table Slot, 3/8 Threads T Slot Rail
Specification
Material: Carbon Steel
Threads diameter: 10mm/ 3/8"
slot depth: 6mm/ 0.24 "
slot width: 12mm/ 0.47"
Package Contains
5 X Sliding Nut
Excellent after-sales guarantee:
We provide you with comprehensive after-sales service. No risk.
If you have any questions, we will patiently answer them for you.
If you are not satisfied with our products, please let us know.
We promise to give you 100% satisfactory after-sales service.
Rich D.
2025-08-02 20:23:16
Worked great! Some on here have complained that 3/8 x 16 threads won't go through but they are designed that way. You would not want the to press against the slot bottom and break something. Good value.
richard ingram
2025-07-06 10:18:38
These are good for a 10mm bolt. A 3/8" will go partially through but would probably need a 3/8 tap to fix that.
Cameron R Coward
2025-05-17 16:16:59
Threads are: 3/8-16(annoying that they don't tell you the actual threads)These work, but they're too tall for my table—they stick out above the top of the table very slightly, making it impossible to actually clamp things down. Not sure if that is my table or the t-nuts at fault.
mary
2025-04-28 16:11:12
Fits and works in my rotary table
Customer
2025-04-18 15:21:33
The T slots are sized correctly but definitely not 3/8" thread. 3/8 x 24TPI doesn't thread at all and 3/8"x16TPI threads in only about 3/4 of the way through. Tried metric as well but no go. Almost 3/8x16 but not. Had to run a 3/8 tap through every one.
Albert Lilley
2024-11-13 10:05:40
Sold as described, just Tee Nuts
Recommended Products
