Your cart is empty.
Your cart is empty.Product Description
Mxmoonfree is committed to providing high-quality precision force measuring tools & push pull test stands.
HP-Series Force Gauge is an economical, multi-functional and high-precision push and pull test instrument.
- High precision and high resolution.
- Three unit systems (N, kgf, lbf) are available for selection, and can be automatically converted.
Digital Force Gauge with Data Output
APPLICATION
The handheld force gauge is widely applied in pull push load testing, insertion force or destructive experiment and industry like electric, hardware, automobile parts, lighter and ignition system, light industry, mechanical, textile... It can be used to test: tension, pressure, peeling force, tearing force, adhesion, bending force, breaking force, welding force, piercing force, opening force, etc.
- Peak hold function, can display the Max value in the test. Peak hold automatic release function, peak hold time can be set freely (1-9 seconds).
- Automatic shutdown function when there is no operation, the shutdown time can be set freely from 0 to 99 minutes.
- Inductive LED backlight, open and close can be set freely, and the backlight time can also be set freely (0-99 seconds).
Free synchronous test software, input test data into the computer through the data line, display the curve transformation graph of test force and time, and can save, print or output the data for various analysis.
- Maximum Load: 500N/50kg
- Opening Range: 0-3.5mm
- Clamp Width: 14mm
- Screw Hole Specification: M6
*The Force Gauge does not contain this clamp.
*The Test Stand contains the clamp.
It can record 999 groups of peak test data, and directly calculate the maximum, minimum and average values. You can also connect the computer with the USB cable attached to the product to obtain real-time test data for statistics and analysis.
About HJJ-001 Clamp
HJJ-001 clamps are not included in the force gauge, but clamps are attached to each force test stand.
SpooferNatural
2025-06-01 13:41:51
Had to disassemble load cell mounting bracket to mount load cell and then reassemble to press. No instructions!
Recommended Products