Your cart is empty.
Your cart is empty.Product Description
GU10 Track Lighting Fixture
Direct-Lighting has been in business since 2002 and presence in Amazon since 2014.
Direct-Lighting H System GU10 Track Lighting Head 50154 - No Bulb
GU10 Base. 120V Line Voltage. Bulb Not included.
- Applications : For general lighting, gallery lighting, and display lighting.
- UL Listed
- H System Track Lighting Fixture
- GU10 Twist and Turn Base
- 50 Watts maximum loading
50154 Track Fixture Includes
- H System Track Fixture
- Ring holder
Specification
- 120V Line Voltage
- 50 Watts maximum loading
- Do not required transformer
- GU10 twist and turn base
Polarity
- Check polarity line. All track components are both mechanically and visually polarized.
- Track has a debrossed polarity line which indicates the positive side ensure proper connection.
Energy Saving
- Dimmable
- UL Listed
H Track System
- Halo compatible system. Compatible with H system 3 wire single circuit track lighting system.
- 3-strip of wire. 1-strip of wire on one side and 2-strip of wire on the other side. It should be just shy of 1", and around 15/16".
- Commonly use track lighting system.
- Recommend for new installation.
GU10 Base Light Bulb
- Accepts Halogen or LED GU10 base light bulbs.
- Does Not accept GU10 hue bulb.
- Bulb Not included. Please purchase bulb separately.
NOT JT or LT Compatible
- Not designed for Juno (JT) or Lightolier(LT) Track Lighting System.
- For JT or LT systems, there should be 1-strip of wire on one side and 1-strip of wire on the other side.
Adjustable
- 350° horizontal rotation
- 90° vertical project
Install or Remove a Fixture
• Turn off switch at main power source before installation.
• Match the polarity line on the track to the track fixture.
• Pull down the adapter sleeve
• Rotate 90° of the head adapter until the adapter sleeve snaps into the track groove and locks into place.
• Removal is the reverse procedure. Track fixtures may be positioned anywhere along the track.
Patrick B.
2025-06-05 10:21:03
Great product and it's a great buy for the price and works wonderfully and built well. The LED light are very bright and not as hot as the normal lights which is great here in Florida
michaelht1
2025-05-13 09:45:13
very impressed, only ordered three, was so delighted with them ordered seven more, provide far more light than my older screw in type bulbs, easy to change, fit perfectly into my old tracks, uses much less energy while providing more light
Rick Seeler
2025-05-08 14:30:44
I just bought a bunch of these to replace some very similar halogen fixtures that I've had for many years. Here is a breakdown of the pro's and con's, assuming you are going to use these with the LE 6.5W Dimmable MR16 GU0 LED bulbs or similar...Cons:* It would be nice if these fixtures had a lip on the inside so the bulb stays securely in place instead of being free to move around. In order to get the light to rest against the retaining ring, you have to twist the light and "futz" around with it for a minute to get it to sit right, but it never sits perfectly.* There is a stop that prevents the light from being rotated around its axis more than 360 degrees, unfortunately it seems to only allow a range of about 340 degrees. This caused a problem for one of my lights.Pros:* They use a lot less power than halogen.* The don't buzz like my halogen fixtures do.* The fixtures bases are smaller than the ones for my halogen lights.* They don't generate any heat - a major plus on a hot Summer night.* They should last a lot longer than those expensive hard-to-find halogen bulbs.* Since they don't generate any heat they should not cause the fixture to deform over time like my halogen bulbs do.
Tom
2025-04-17 15:16:27
I purchase these lights a couple months ago and they are just fine, a good deal for the price. But I just reordered a few days ago and what they sent me is NOT what is pictured. The light i received previously were exactly like the pictures, but these are different in a number of ways: 1) they are shiny refrigerator white, rather than semigloss warm white, the support arms are 20% longer than those in the picture, the knobs are a different shape, the grill in back is coarser than than what's shown. I'm returning them. Very disappointing.
Keith Tyler
2025-03-20 12:11:27
Had to switch from GU5.3 to GU10 heads for H-type track and opted for these. Good value, work well. The flange on the outer ring is a bit narrower than I'd like, and didn't allow room for the outer O-ring for the bulbs I am using (which are not standard, so I guess I can't complain too much). In the end, though, the narrow O-ring meant I could kind of "shim" the bulbs against the ring and that has been enough to hold them in.One thing to know about these is the interesting latching mechanism. Instead of a single spring slide back notch like traditional heads, these heads latch to the track by *pulling the base's whole outer frame down* which is springed. It took a while to figure that out as I was trying to jam them into the track.
Big foot
2025-02-18 12:04:20
Product came in as described from China.Ordered 11 and one of them missing one contact part, but working fine.I paired them with 60W LED and it is super good.Replaced old 40W halogen track light and due to low W, I added more numbers of lights. Family room has good amount of lighting now.
basically.me
2025-01-27 17:19:23
These light heads are small, simple, elegant and very easy to install. I am very satisfied. They look much slicker than the halogens I used to have (see picture). Highly recommend for housing LED bulbs.
Bob V.
2024-11-20 11:46:26
This fixture only works with LED bulbs. If you use LED dimmable bulbs with an electronic dimmer that has little signal lights in it, the LED bulb never goes out completely. Very frustrating.
Recommended Products
$26.94
$ 13 .99 $13.99