Shopping Cart

Your cart is empty.

Your cart is empty.

50Pcs Nylon Socket Lights Emitting Diode Holder LED Light Mounting Holders

Free shipping on orders over $29.99

$6.89

$ 2 .99 $2.99

In Stock

About this item

  • Plastic holders are for easily attaching LEDs to boards
  • 3mm, 5mm, 8mm, 10mm, total 4 different sizes of LED socket for your selection
  • Safety locking screw in base for secure fitting
  • Easy to use and install, economical and practical


Specifications:
Material: Plastic
Working Temperature: -20~120
Inner Diameter: Approx.3mm (0.12in), 5mm (0.2in), 8mm (0.31in), 10mm (0.39in) (optional)
Dimension:
Inner Diameter: Approx. 3mm (0.12in), External Diameter: Approx. 6mm (0.24in)
Inner Diameter: Approx. 5mm (0.2in), External Diameter: Approx. 8mm (0.31in)
Inner Diameter: Approx. 8mm (0.31in), External Diameter: Approx. 12mm (0.47in)
Inner Diameter: Approx. 10mm (0.39in), External Diameter: Approx. 14mm (0.55in)
3mm socket loaded 3mm of LED light-emitting diade
5mm socket loaded 5mm of LED light-emitting diade
8mm socket mounted 8mm of LED light-emitting diade
10mm socket mounted 10mm of LED light-emitting diade
Package Weight: 9~46g

Package Included:
1 x Lot of 50Pcs 3mm/5mm/8mm/10mm Sockets


bronsonj
2025-08-26 09:39:08
I see negative reviews but I wonder how they were installed.If you put the LED in you can pull it right back out if the clip isn't installed. If you drill too big a hole then it'll be the same problem. for the 5mm clips I drilled a 5/16ths hole (8mm for those elsewhere) and it worked great. Feed the LED through from the backside so it's hanging out the hole. Put the LED in the clip. Set the clip at the opening and push without touching the LED. I used a small socket to it wouldn't touch the LED. Once it's in the plastic, it stays put and you can press on the LED and it doesn't move.I removed the BLIS indicator from the mirror and wired in a 5mm LED and resistor, using this clip, to the side plastic of the mirror housing making it much more visible.
Kindle Customer
2025-08-23 09:46:07
These are excellent and solve an engineering problem for me. They hold the LED in a very firm, fixed position, so the LED can be reliably aimed at a particular surface to illuminate. Perhaps not necessary for every application, but it was important for mine.
Jacoby
2025-08-18 19:28:24
Description states it has 4 sizes. Its only a 50 pack of one size, with no options to get the other sizes they mention without going to a different ad.
Crissy
2025-08-16 16:34:07
Only One Size. 👎🏻
Carlos Garcia CCS-400097
2025-08-12 14:11:01
I only needed one to place a HDD activity LED on my case, which oddly didn't came with one.
clint mcallister
2025-07-23 17:36:51
Used these with the 50 blue flashing leds that I had ordered. They all worked fine.
Customer
2025-06-02 19:24:32
I purchased these 5mm lamp sockets to house 5mm Led lights previously purchased. They worked as expected.
Brent
2025-05-24 10:36:59
Some of these work, and those are great.Some do not. I received an entire bad batch.Possibly rejects from the factory where they are made, but difficult to know, until installed, then when pressure is applied, the LED slips past the defective locks and disappears inside.
ernesto enei
2025-05-01 10:59:43
Es fácil ponerlas y el led queda bien sujeto , se ve bien terminado !
Tylor & Kyrie
2025-03-22 10:49:52
These are nice and perfect for what I needed just wish they came in a bag or something and not just thrown into the box's with everything else i bought that day.
Scott
2025-03-17 17:53:02
They work as they should
Hector A.
2025-02-12 17:14:49
Lo compré en dos ocasiones y me llegó incompleto en las dos ocasiones , es una simple bolsa sellafacil como el vendedor entrega ,por eso es fácil de abrir y le saquen piezas!!! , ojalá corrijan eso y tengan un mayor control en revisar que las entregas estén completas y cambien su empaque de entrega
Malcolm
2025-01-13 11:27:34
They fit and hold the lights perfectly for marker lights on my lowboy trailer