Your cart is empty.
Your cart is empty.1. Item Size and Packing: 50 Pcs 6x7 inch sublimation shrink wrap sleeve. 2. Easy to Use: Attach printed image to tumbler or other sublimation blanks with thermal tape, then place item in shrink wrap sleeve and then apply heat by Heat Gun, place in oven preheated to 356°F for approximately 7 minutes (for reference only!) 3. Easy to Tear Off: The sublimation shrink wrap sleeve is very easy to tear off after print in the oven. 4. Full Wrap Print and Wide Applications: This size 6 x 7 Inch is very suitable for 12 oz sublimation Wine tumbler and can be full wrap print, it's also suitable for other sublimation items. 5. Sublimation Effect: Great for all sublimation items and the print effect is perfect. Note: 1. When apply heat by heat gun, we need to notice 2 very important points: Wear gloves to avoid injury; Do not put the heat gun too closely to the tumbler or other items, in order that you will not get a hole in the film, it's better to adjust suitable temperature and then move your hand lightly while using heat gun. 2. Set the oven to 356°F (180℃) for about 7 minutes(for reference only!), the temperature and time varies with different environment. 3. The adhesive tape to fix the transfer paper must be thermal tape instead of ordinary plastic or paper tape. 4. The tumbler lid can not be put in the oven, only the tumbler, printed image, thermal tape and shrink wrap sleeve in the oven.
Yani
2025-09-02 14:01:04
Great wrap fast shrinking.
Danielle Evans
2025-08-02 16:07:56
I really like that these have a perforated edge, it makes taking it off the items so much easier.
Bob
2025-06-02 16:08:56
Sent it back. I should of read reviews
Law Student
2025-04-26 20:17:29
I think it’s good but first time using it; however, I prefer sublimation without shrink wrap
CG
2025-04-09 18:38:38
It melted too much. Honestly felt like tape worked better
lucia amezcua
2025-03-17 12:47:12
suave
Anthony Payne
2025-02-24 10:31:45
This shrink wrap is terrible. It melted even at 350 degrees. Ruined 2 tumblers.
Lisa
2025-01-13 11:00:06
This shrink wrap is the worst I’ve ever used. It started melting as I was shrinking it with my heat gun. It was smooth when placed in the oven, but started bubbling and melting immediately. Recommended time and temperature is 356° for 7 minutes. I used 350° for 5 minutes. The wrap melted so badly that the image on the cup was burned. It even stuck to the black oven mat that was on the shelf.
Recommended Products
