Your cart is empty.
Your cart is empty.
EFFICERE 60-Piece Premium Tap and Die Sets is your best choice tools for hand threading and rethreading jobs at home, garage, shop and work sites. It is perfect for a wide range of applications, such as auto repairs, metal fabrication, machinery, plumbing and a lot more. It can be used to both cut new threads and chase / renew existing threads.
This set is made from highly durable GCr15 bearing steel, and cuts through a wide range of metal pipes and rods including carbon steel, cast iron, stainless steel, aluminum, brass, copper and much more.
All the cutting teeth are professionally CNC (computer numerical controlled) machined and heat treated to Rockwell hardness 60 HRC for providing aggressive, clean and precise threading results. The taps and dies also feature a tapered design, allowing an easier start and preventing over threading.
Set Includes:
(27) Taps;
(27) Dies;
(1) Adjustable Tap Wrench;
(1) T-handle Tap Holder;
(1) Adjustable Die Wrench;
(1) Flat Screw Driver;
(2) Thread Pitch Identifier;
(1) Storage Case;
Tap and Die Sizes:
20-Piece Metric taps and dies: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M7 x 1.0, M8 x 1.25, M9 x 1.25, M10 x 1.0, M10 x 1.5, M12 x 1.75;
20-Piece Numbered and Standard Fractional taps and dies for Coarse threads (UNC): #4 - 40 NC, #6 - 32 NC, #8 - 32 NC, #10 - 24 NC, #12 - 24 NC, 1/4” - 20 NC, 5/16” - 18 NC, 3/8” - 16 NC, 7/16” - 14 NC, 1/2” - 13 NC;
12-Piece Numbered and Standard Fractional taps and dies for Fine threads (UNF): #10 - 32 NF, 1/4” - 28 NF, 5/16” - 24 NF, 3/8” - 24 NF, 7/16” - 20 NF, 1/2” - 20 NF;
2-Piece Pipe Threader (NPT): 1/8” - 27 NPT;
vardelda
2025-09-01 18:07:17
This is the best hobbyist grade set I've found on Amazon. It compares directly to very similar sets costing twice as much and delivers performance of much more expensive sets for non-pro use. Yes, "non-pro" is difficult to define. But if you only need the occasional thread chased or hole tapped, this set is all you need. (On the other hand, if you need to do actual, regular machining tasks and you're looking to save some money -- you REALLY need to save up and buy pro tools. You won't get there wasting your money a bit at a time on hobby-grade.) The machining on the taps and dies is clean and crisp. I inspected each piece and didn't find any crunchy bits worth noting. The handles are just ok -- I've broken tap handles of this type before. The T-handle is an exception as it is quite solidly constructed. The handles are easily addressed by buying higher quality stand-alone handles for this set. I noted several negative reviews based on the case and, yes, it is basic quality. But the seller is apparently listening because they have more/less exactly followed one reviewer's recommendation to add a piece of layered foam to hold the taps in place when the lid is closed. It works well and, although the taps all lay loose in their 'slots' (it's really a tray as there is no retention at all), none move when the lid is closed. (FWIW: I recommend hot gluing the provided foam insert to the lid so its not floating around when open.) I do wish the slots gripped the bits as they are subject to jumping out if the case is tilted/knocked while the lid is open. But look, these are minor nits on what is otherwise a surprisingly well machined set -- and a great value at this price.If you're not a pro, my advice is buy this set, replace the handles when ready and replace any heavily used taps or dies with high quality when you wear one out. In this way you minimize investment on a set full of pieces you're unlikely to ever use and you can focus additional money on quality exactly where you need it. Recommended. (Just be careful not to drop that case!)
ChrisGST
2025-08-11 14:12:58
This set seems to be a good bargain for a DIYer who wants a decent general use set for random tasks that come up.The Pros:1. I measured all the pitches on both the SAE and Metric taps with an Irwin thread pitch gauge and all of mine were spot on. (They also included thread pitch gauges, but I didn't use the included ones)2. I've used these to tap into stainless steal with no issues.3. I tested an Irwin tap I have vs. one from this set (same size) and I didn't notice any huge difference in performance for that size (it was 10mm 1.25 pitch). Make no mistake though, the Irwin tap is better, they are just significantly more expensive for a similar set.The Cons:1. The cheap blow mold case does not keep these all organized well, even if you leave that "sheet" in there. If you expect to move these around a lot you're probably going to need another solution or else you'll go insane with an exploded mess every time you open it up. It also arrived to me in an exploded mess when I opened it.2. The "tools" they throw in to use the taps/dies are terrible quality and you'll probably want something better. They can probably get the job done in a pinch, but they suck.Conclusion:For how cheap these are you I can't really complain at all. This set does not scream high quality to me at all and I have no idea what the long term reliability will be like, but if you're in a similar position that I am in that you want an "ok" set for the once in a blue moon job you have these should be sufficient. As others have said if you're a "pro" you might want to invest in a name brand set.
K. McCauley
2025-07-25 11:53:08
The media could not be loaded.
Tony
2025-07-14 13:44:05
Arrived as advertised. Nice product.
hartzofmn
2025-06-25 18:40:37
I needed a specific size metric die to chase some threads on a motorcycle bolt that I partially stripped. For only slightly more than the cost of the right die and a handle to hold it, I got this whole set. The die worked fine and fixed my threads perfectly. I don't need to tap or chase threads very often but this set has lots of different sizes, and even if it doesn't happen to have one I need, it'll be a simple matter now to just buy the one part I need. The size of the parts is clearly marked and the carrying case makes it easy to keep things organized.
Andreas Reich
2025-06-13 16:56:08
Gerne wieder
Alexander
2025-06-02 10:49:56
Good set
WONG
2025-03-19 17:58:06
Comprehensive product
hector
2025-01-29 12:36:13
en uno de los apartados dice que trae rosca m12 X 1.5, me confie con esa descripcion y no trae ni machuelo ni tarraja de esa medida
Hardik Shah
2024-12-21 15:05:23
Tools are very good, for average day to day usage in Tapping But other then that,the Case is very loose, it doesn't hold tools right, and when the case came all toolswere very messy inside it, have arrange all tools again and once I packed and liftedit up and opened again, it was again messy.. so 1-star less for Carry Case and4-star for tools although they are not top notch quality but good quality for the Price.
Recommended Products
