Your cart is empty.
Your cart is empty.Omar Baltodano
2025-09-07 14:25:30
Great quality for the price. easy to install them, just DYI in minutes. use the same one in last two hunting seasons and they are working great.
J.S.
2025-08-23 11:54:29
These lighted knocks are a lifesaver when it comes to not losing bolt's. Liked the first package I bought so much I bought a second.
Customer
2025-08-15 14:08:13
Just like explained
Brad Goodall
2025-08-06 13:22:21
Given that these are about 1/5 the cost of a name brand lighted nock, they work great! They fit without glue in Mossy Oak bolts from wal-mart, and with a drop of glue in aluminum bolts (note, these do not fit carbon express bolts without a trip to the lathe). From testing, these do not impact the aimpoint at all, and the light turns on every time, but thats to be expected given the simplistic nature of this device. The only downside is the only way to shut these off involves using a metal pick or the included screwdriver to push the button forward via a hole in the side. But then again, if you can't shut it off without tools, neither can the deer! Will update with field use.UPDATE: These have already saved me from losing a stray arrow during target shooting. However, I did have one light where the plastic cap that depresses the switch pushed the switch too far back, and it took me about 10min to get the thing back into place. Good idea to have a spare or 2 on hand if you're practicing/hunting with 6 arrows.
Robin
2025-07-31 18:29:06
perfect fit and work great - very durable
Joseph E. Lilly
2025-06-17 11:14:40
There are no instructions that come with these so the novice should be forewarned. Most knocks on bolts for crossbows are not glued in but they are stuck in very tightly chances are you will destroy the knock the old one before you get it out there should be a better way of removing them and better instructions with the package also it should give you an opportunity to replace the batteries instead of having to buy new ones after the 50 or 60 hours of on time the fine print needs to be larger for people who need reading glasses or other means of reading such extremely fine print it's not even an eighth of an inch high and I had to get a magnifying glass to read it.
Arlene Soto
2025-06-16 17:31:18
The nocks are very bright. I have the carbon express Pile Driver bolts. And I knew the nocks were going to be too big. So I used a grinding wheel machine and within 5 minutes, I had all 6 done. If you try this go slow and check fitness after every pass of the grinding wheel. As you pass the nock through the grinding wheel spin the nock with your fingers insuring that all sides of the nock get grinded and becareful not to remove the back ridge/edge of the nock that goes seated in the bolt. Hope this helps anyone
Rowdy rod
2025-04-05 12:19:40
See them will
nahum duran
2025-03-13 17:56:15
Muy buen agarre
gary
2025-02-04 17:49:43
Installed these on my father’s crossbow bolts. He was able to quickly find an arrow that came off his quiver. Also make finding the arrow very easy after the shot. My father would have lost at least 2 arrows without having lighted nocks. The blue color stand out in hunting situations.
Recommended Products