Your cart is empty.
Your cart is empty. Labvida wide mouth unitary wash bottles are made of LDPE material with PP draw tube, bottle and tubulation molded in one piece that means contents can be dispensed without tipping or shaking.
Dispensing tip can be cut back to increase flow. Bottles made of LDPE material, with polypropylene screw/stem and draw tube.
Designed to dispense uniformly through the top with a closure and stem molded in one piece for leak-proof service. Tip can be cut back to provide increased flow. Tight fit of draw tube and closure prevents separation when squeezing bottle.
Labvida wash bottles are suitable for use in chemistry and biology applications, as well as in pharmaceutical and scientific testing.
After-Sales Service:
Labvida always persists in “Quality First, Customer First”.
We are 100% dedicated to your complete satisfaction. Any questions or suggestions on our products or service, please do feel free to let us know. Appreciate your support and patience.
Matthew Foran
2025-08-22 16:35:00
My use case is a little different - I am using these to hold liquid fertilizers for my automated aquarium system. I got these since the integrated straw makes it easy to get [almost] all the fertilizer and the wider mouths makes them easy to refill. Standard aquarium air line fits over the squirt nozzle nicely.
Curtis W Watt
2025-07-24 14:16:23
These are good overall. The finish around some of the seams can be a bit rough. This also caused some of the siphon tubes to be rather narrow at the top. The tip is removable, but upon replacement can sometimes drip from the joint. Overall they are worth the money, but i would hesitate to use these with strong chemical solutions.
PlenaryEtalon
2025-07-07 10:09:03
All 6 of the bottles I received leaked after a few uses. The plastic seam where the bottles are molded together does not form a seal with the cap. There are no threads on either side of the seam either. These bottles are much lower quality than my other wash bottles which have been in use for years with out leaking.
M. Jose
2025-06-06 16:20:51
After using lesser wash bottles to apply weekly bleach sprays to drains and other mildew-prone surfaces, I got tired of how the bleach caused them to deteriorate and fail within 3-4 months. I switched to these bottles and am quite happy with their resilience.
Rev Marx
2025-05-29 16:17:30
they perform fine, but there is a decent bit of dripping from the tip after the squirt.
Brittany
2025-02-10 16:34:20
Broke the first one after one use, just a few squeezes. Thought it was just a defective one, then proceeded to go through all of them, just to have them all break. DON'T BUY, VERY POORLY MADE. The nozzles broke in half longways on most of them, the other half didn't have a lid that sealed in the liquid so when I squeezed there was no seal, therefore nothing would come out. I would understand if one bottle was defective, but to have all 6 bottles break within the first few weeks is unacceptable.
26venus
2025-01-21 17:34:10
Half of the bottles' fluid passageway was not hollow. It appeared to be a defect during the molding process. It was basically a solid piece of plastic that nothing was going to pass through, no matter how hard you squeezed the bottle. Unfortunately I discovered this after using 2 of the bottles so I couldn't return them as a set of six which is how they were sold. I tried to get a partial refund from the seller. They wanted pictures which I explained would not clearly show the problem. Then, believe it or not, they actually asked me to "cut it with sharp object,like needle or scissors?If it still can't work, we will give you $2 as refund"...their exact words. What a bunch of idiots!!! $2...are you kidding me?
Customer
2025-01-15 11:10:48
Plastic spots brakes very easily.Worthless after a couple of weeks.
Recommended Products
