Your cart is empty.
Your cart is empty.Product Description
Product Information
- Terminal: 2 Pins
- Motor Included: Yes
- Location: Front Left Driver Side
- Design: Two Sliding Bars
- Attachment Type: Bolt On
- Quantity Sold: One Piece
- Material: ABS Plastic and Metal
- Reference OE Number: 741-428, 4L3Z1523201BA, 4L3Z1523201CA, 6L3Z1523201BA
- Note: It will only fit standard or crew cab with 43.5'' wide doors, not for extended cab
Professional Manufacturing
- Bold high-quality steel wire: thick steel cable, strong, durable and wear-resistant, not easy to derail or break.
- High-quality motor: high-quality enameled wire pure copper motor, large torque, high performance, stable lifting.
- High-quality guide rail materials: selected high-quality galvanized sheets, produced through several stamping processes and advanced electric welding processes, with high strength, durability, and resistance to deformation.
Attention
- When wiring, pay attention to the polarity of each wiring harness, and is equipped with a dedicated electric window regulator switch.
- When installing, each link fastener should be fastened and reliable, and washers should be added. The grooves of the guide rails should be kept clean, lubricated, and free of dust layers to prevent them from being seized into the motor during operation in the future.
- At the same time, the front, rear, left and right electric glass lifters have their own directionality, and they cannot be mixed during installation.
Maintenance and Repair of Window Regulator
- During regular maintenance of the electric lifter, all moving parts of the motor should be cleaned. The shaft sleeve of the transmission part should be filled or replaced with lubricating grease. The wear marks and carbon deposits on the surface of the motor steering gear should be sanded with No. 00 sandpaper. Diamond gauze should not be used.
Antonio
2025-09-03 10:11:52
Muy buen producto funciona sin problemas
Clay Hirsch
2025-08-24 13:46:11
Perfect fit,very simple to replace!
Papa B
2025-08-18 18:20:20
Manufactured incorrectly. You have to cut the wiring and switch it around to get it to work properly. Be warned.
jose lopez
2025-05-11 18:40:10
Of course you just need to know how to installGo you tube very easyI believe is a good product
Tom Maxwell
2025-04-15 11:01:18
I was excited when I received this package and notice it was almost a 100% clone of what I took out of my 2006 F150 Crew Cab Texas Edition pickup. The only thing that looked different was the electrical connector is on a short tether rather than an attached socket connected to the motor. This isn't really a problem as far as installing is concerned. Installing these regulators into the drivers side door is quite a chore. A complete dismantling of the door is required. But that has nothing to do with this product. I got it installed and it works great, almost! I noticed that the motor was wired backwards for my truck. That is, when I pushed the window button down, it goes up, and when I push the button for the window to go up, it goes down. I don't know for sure but I think it could be that there are two styles of window buttons on these trucks. Mine is a simple middle pivot push forward/push back type button. There is also a button that is push forward/pull up. Anyway, for my truck I had to cut the connector off the wires and then resolder them in reverse I ended up connecting red to blue and blue to red to make it work correctly. This wasn't a bid deal for me as I have the equipment and skills to easily do this. But it could be a sticking point for those who aren't adept at soldering and cable maintenance. IMO, the company should provide a short jumper that allows for reversing the wiring dependent upon the application. Other that wiring issue, it works fine and my window now goes up and down again.
jnmnl
2025-03-15 12:17:20
Finally got around to replacing the passenger window motor on my 2005 F150 lariat. This unit was reasonably priced and operates quietly and efficiently I would recommend that you watch a few videos on the installation process as it is a little involved, but not too difficult for a DIYer.
Belinda Ramirez
2025-02-19 11:07:49
Bought this for a reasonable price compared to dealerships price, triple the amount and was put on my Ford truck and it works great..
AJ R.
2025-01-14 18:51:44
Worked great and prper fit
kevin
2024-12-08 10:18:34
Lo instale a una ford lobo 2008 cabina sencilla y muy bueno su funcionamiento y su instalación también muy sencilla vienen lubricados todos sus engranajes y viene todo completo sin faltarle un solo tornillo
Hugo Herrera
2024-12-06 17:05:04
no es compatible con mi unidad es una Ford lobo 2000 4 X. LP cabina extendida y no queda
Recommended Products