Your cart is empty.
Your cart is empty.Product Description
THE FIRST UPGRADE YOU SHOULD HAVE FOR YOUR 3D PRINTER
Upgrade for Ender 3, Ender 3 Pro, or Ender 3 V2
Our 20mm springs is made of high quality spring steel, fatigue and heat-resistant,reliable for use.
These springs may seem trivial, but the springs used on 3D printers can improve print quality and stability.
Replacing the original spring on the printing bed of the Ender-3 3D printer to obtain a stronger spring,
will allow you to print at a higher speed without worrying about any wobble.
These strong and well-compressed springs are a cheap and easy way to upgrade the Ender-3 3D printer.
TIPS
Die springs are primarily used in die machinery. For die springs, yellow color here represents that the loading grade is light load.
SPECIFICATIONS
Material: Spring steel
Color: Yellow
Length: 20 mm/0.78"
Hole Diameter: 8 mm/0.31"
Rod Diameter: 4 mm/0.16"
Model: TF spring
Quantity: 20 pcs
- FAQ
- What is Hole Diameter?
- Hole Diameter: The Diameter of the Hole on the Mold ,i.e. the Outer Diameter of the spring.
- What is Rod Diameter?
- Rod Diameter: The Diameter of the Rod that is to be inserted into this spring, i.e. the inner Diameter of the spring.
QUICK AND EASY INSTALLATION
1.Unscrew the adjustment knobs from the bottom of your print bed.
2.And replace those stock springs with these new ones.
3.Screw the adjustment knobs back into the print bed with these new springs.
4.Then you're free to go! Level your bed and keep on printing!
Brandon Kovash
2025-08-22 16:50:44
I got these as a small, inexpensive upgrade for my Ender 3 3D printer and they work perfectly. The stock springs that came with my printer weren't exactly "bad", but after receiving these I noticed that they're much stiffer than my original springs; making my print bed much more stable while printing. I would highly recommend these as a small purchase if you own a 3D printer with springs on the print bed such as the Ender 3!Pros:- They couldn't be easier to install! Unscrew the adjustment knobs from the bottom of your print bed and replace those springs with these new ones. Screw the adjustment knobs back into the print bed with these new springs and you're done! Level your bed and keep on printing! :D- They're yellow. That could be a pro or a con depending on your preference, but it gives the printer a little more of a "performance" look to it, in my opinion. It makes the Ender 3 look a little more intricate at the very least.Cons:- Nothing. I got 20 springs in a small bag and they work perfectly for my purpose! I will definitely be buying these again if I'm in need of more springs for my printer!
Caleb Andrew Walz
2025-07-04 19:52:32
I've had my Ender 3v2 for a month now. The factory bed springs worked well for a few weeks but it got to a point where I could not print anything. I could not level the bed at all. After replacing the factory springs with these, I noticed the bed is a lot easier to level and it feels more sturdy. This review is coming early from me as I have only had these for a few days but they seam promising and cost next to nothing.
Loadstorm
2025-06-18 15:02:35
I got tired of leveling my hotbed nearly every time I printed something, so I picked these up to try them out. I still seem to be re-leveling my bed quite a bit when printing ABS (perhaps the hotter temps), but these seem to hold the bed level for quite awhile when I am printing with PLA. Definitely worth the few extra dollars to pick up this package to replace the stock springs if you have an Ender 3 v2 or like in my case, the Voxelab Aquila X2.
Pete
2025-06-12 12:02:20
These are better springs, but I still end up leveling the beds oftenI thought these would eliminate the need to level so often, and they really do not accomplish thatThey do seem to stay put' better than the stock springs though, so it is faster to level than beforethey do not cost much, so I would recommend these as a worthwhile upgrade, just not a 'necessary' upgrade perhaps
Alan Jay Ritchie
2025-05-04 14:47:34
Okay these bed springs are really good and durable! I was told by multiple people in 3D printing forums to have these on hand before purchasing my Ender 3 V2 so that I could replace them immediately. Well I did the right thing! The stock bed springs that you get with your Ender 3D printer are very weak. With these bed springs you will not have to level your bed as often. These bed springs will keep your bed more level than what the stock springs do. You can definitely tell the durability difference between these and the stock springs. Definitely buy these and replace the stock springs immediately! What's great is you get multiple sets so you can do multiple 3D printer beds or put the rest back to have whenever you feel you want to replace them again (honestly it may be a long time because these are very strong)
J. Pumfrey
2025-04-25 14:10:29
the stock springs on the folgertech print bed are very flimsy and collapse when attempting to get enough tension to level the bed properly. These hold up very nicely and leave a lot of room for adjustment as needed using the stock folgertech bed screws and thumb screws.
Julie Rupert
2025-04-07 16:43:34
I have a Ender 3 printer and omg the amount of times I had to level this thing is crazy. I just figured this is my life now just being in a constant state of leveling! I was watching a video about upgrades you can get for my printer and the person in the video recommend these! I couldn't check out faster, I literally stopped the video and bought these and then went back to watch the rest and man are these a game changer. They were easy to install and after the old leveling song and dance they have made my printer 100x easier to level and they stay in place and the bed is level for 5x the prints from before!
barney
2025-03-21 20:21:20
Significantly more tension than stock ender 3 springs. Also shed light on print quality issues I was having. I had minor z banding and basically rebuilt the entire machine. Changed wheels, z rod, coupler, brass nut, types of lube, resquared the frame on the z, almost rebuilt it from scratch and print quality remained the same. Tried these springs.... bed much more stable and z banding only noticeable at the right reflective angle and under a microscope. Now z banding has been traced to direction changes on different layers so I’m guessing nozzle quality now to make it absolutely perfect.Long story short (too late I know) excellent for me so far. May try the red and blue springs if I get ocd again but for now I’m very satisfied.
RAVeman
2025-01-18 10:04:04
I do Not have to adjust the bed as much now
Recommended Products