Your cart is empty.
Your cart is empty.Product Description
A2ZCARE Weight Plate Holder, Attachment Power Cage Rack for Power Rack, Weight Plates Storage Fit 2-inch Olympic Weight Plates
PLEASE CHECK THE DIMENSIONS OF YOUR RACK AND THE DIMENSION OF OUR PRODUCT BEFORE MAKING A PURCHASE SO AS TO PREVENT ANY UNCOMFORTABLE RETURNING PROCESS
A2ZCARE Weight Plate Holder - Space Saving Solution For Power Cage Accessories
- A2ZCARE Weight Plate Holder for Rack 2x2 (Inch)
Fits 2x2 (inch) Steel Tube Power Cages. A2ZCare Weight Plate Holder can be easy to install and fit most of the 2x2 (inch) square tubes rack and 1-inch hole, but not all.
- A2ZCARE Weight Plate Holder for Rack 3x2 (Inch)
Fits 3x2 (inch) Steel Tube Power Cages. A2ZCare Weight Plate Holder can be easy to install and fit most of the 3x2 (inch) square tubes rack and 0.6-inch hole, but not all.
Note:
- Please check the size of your power rack tube first before placing the order.
- We appreciate that you check your rack dimensions before making a purchase so as to prevent any uncomfortable returning process.
Why should you choose A2ZCare Weight Plate Holder for your power rack ?
Heavy-duty Constructions
A2ZCare Weight Plate Holder is made of solid stainless steel with black powder-coated to prevent item from being corrosive, rusty or broken apart and extend the age after a long time using.
Smart Design
This smart design also makes it more convenient for loading and unloading the weight plates.
Functional
Each Weight Plate Holder can withstand 300 lbs and the total set can hold 1200 lbs (set of 4) due to well-constructed structure, fit 2-inch Olympic weight plates.
Space Saving Solution
A2ZCare Squat Rack Plate Holder is the perfect alternative for bulky and space-consuming weight plate trees. The holders are especially perfect for home gym, garage gym, or commercial fitness facilities with limited space.
Note:
- Please check the size of your power rack tube first before placing the order.
- We appreciate that you check your rack dimensions before making a purchase so as to prevent any uncomfortable returning process.
Customer
2025-08-19 15:36:55
I have a Parabody 814 power cage with a 2"x2" frame. Yes, Parabody is old and I purchased it before many of you readers were born, but it is a made-in-USA beauty dimensionally similar to many of the leading brands on the market today. I added these 2"x2" plate holders at the lowest point on the cage, perfect fit for the 1" hole and 2"x2" frame. Product is nice quality with full welds, sufficiently heavy steel gauge, and nice black powder coating finish. They came with bumpers, not sure if they are rubber but more likely HDPE plastic, regardless they are plenty durable material.I like the 87 degree incline angle, this is THE key feature for why I purchased this pair over other offerings on Amazon, so my Olympic plates wouldn't have the possibility to slide off. The bumper is thick enough such that my 45lb plate is at a slight inward angle but the top edge of the plate does not touch/scratch or rattle against the power rack. The angle keeps the plates tight and rattle-free without clamping. I ordered a second pair to mount on the front of my rack given the experience of quality and function of the first pair. I put 45s/35s at the back of the cage and 25s at the front so they don't interfere with any mobility around the cage. I have three Olympic weight sets so this provides for enough storage in combination with one plate stand.
Isaac
2025-08-16 15:03:12
As of 2021-04-20, the description for this item claims the pin will fit a "0.6†HOLE or LARGER." This is NOT the case, as the pin is 5/8" or 0.625 inches. My squat rack (Fringe Sport Garage Series) has holes that are also 5/8", and I had to use a hammer to bang the pin through both holes. If your squat rack has holes that are less than 0.625 inches, THE PINS WILL NOT FIT. I'm guessing they converted from metric and rounded to end up with the 0.6" figure.Dimension issues aside, the actual quality of the product seems high. I have spent the last few weeks adding and removing plates from these horns, not gently, but not aggressively, and have had no issues. I normally keep 127.5lbs on each horn. I will update this review if/when I experience an issue.
Ansatz
2025-08-10 18:46:32
These are way more convenient than having my weights on the ground or on a weight tree. I can fit up to 4 45lb plates on one peg. I got 3 pair, but you need to place them where it won't interfere with your J-cups. It's also great for stabilizing the squat rack. Now I can do exercises with my pulley system or suspension trainer that would have tipped the squat rack over otherwise.Just check that your squat rack size is correct (2x2 inch uprights with 1 inch holes for me).
your right
2025-08-06 10:16:52
They scuff pretty easy, and the end caps pop out, but they get the job done
Andrew Benson
2025-05-29 17:03:57
I ordered a set of A2ZCARE Weight Plate Holder, Attachment Power Cage Rack for Power Rack for 2x3" cages and was shipped a set of Gymastic [sic] Ring - wooden - dia.32mm instead. A2ZCare was very quick to provide a refund and assured me that they could ship the correct product to me if reordered. I reordered the 2x3" plate holders and they came as advertised. They DO fit the Hulkfit power cage and are slightly larger than the bar as the Hulkfit power cage uses ~2.5x2.5" (just make sure you get the 2x3" plate holder).
WKND DIY MONSTER
2025-05-23 17:38:32
Great quality and super strong. Even has a sort of felt liner to protect your cage. Came faster than expected. Sadly I had to return because it only fits uprights that are 2†x 2-5/8†(would not fit on my 2x3†Fitness Reality X-Class Light Commercial). Great news is even though this is an unknown seller/brand to me, the customer service support is outstanding and within 2H of request, they authorized my return and send me label for return in the Amazon system.
pedro
2025-04-28 11:58:54
Arrived with the edges with a lot of rust
Ben
2025-04-24 11:38:52
Fits and works great
Jen
2025-04-23 21:18:21
Arrived before estimating delivery date.I was looking for something to hold my bumper plates & use the weights of the plates to hold the power cage down when I am doing muscle ups (power cage shifts whenever I do them). Found these on Amazon: price wise was affordable & was available.Ordered them end of November & received them today (December 27). They were shipped from the States.They fit exactly on my Fitness Reality 810XLT Super Max power cage. No gaps....my power cage “posts†measured 2â€x2â€.
Simon
2025-04-14 13:12:09
Perfect !! I'm so happy thanks a lot, it's solid, it's fit perfect in my rack 2x2. Fast delivery in bonus.
C
2025-04-03 09:54:29
Simple fits and works well!
Brad
2025-03-01 16:29:22
So far so good! Fits my Olympic weights great on my 2x3 rig.
DB
2025-01-18 18:20:57
Pretty good for the price, and cleans up my small gym area nicely.
Recommended Products