Your cart is empty.
Your cart is empty.Product Description
Quality Products to Protect Your Electricity Safety
Quality Plastic Shell
- Flame retardant material, sturdy and durable.
Indicator Window
- Green Indicator: OFF
- Red Indicator: ON
Silver Alloy Contacts
- Reduce the heat generated by arcing during disconnection.
- Reduce the wear of the contacts.
- Improve electrical durability.
Installation
DIN Rail
- Install the 35mm DIN rail horizontally in a stable environment. (package: 1P NO DIN rail, 2P with 1 x DIN rail and 2 x screws.)
Installation
- Hang the circuit breaker slot on the DIN rail.
- Push the lower end of the circuit breaker into the DIN rail.
Dismounting
- Push the circuit breaker upward.
- Turn the upper end of the circuit breaker out of the DIN rail.
Michael H
2025-09-03 15:41:02
Bought four of them. All works well. Great value!
patrick zickefoose
2025-08-20 18:59:56
Came with everything needed, has a good quality feel and performing quite well. I’m very pleased, especially considering the low cost!
robert hamm
2025-08-15 15:18:43
Works great on my solar edge back up interphase equipment.
Brian Thomas
2025-08-09 18:40:53
We try to buy from the Ma and Pa places on here.Being disabled . We need to be price conscious. At "The Mother In Laws Place"It is an off-grid cabin, we run DC on a lot of things . We see no need to use the inverter 24/7. just so you can turn on a light when you come home .We use LED bulbs in ceiling mount fixtures that are marked 12-volt DC only. These are controlled by controller with a FOB remote.The controller is board mounted on our PV control center .We use a few of the controllers for different rooms to control each ceiling light .We also run the kitchen stove exhaust fan with DC .The fresh air intake system for combustion is DC .These are fused in our DC only fuse center . This fuse center is controlled by a service disconnect at the DC master box .We also run two AC fuse boxes on our PV board . One protects various AC 110 volt circuits in the cabin , garage and sauna .The other protects 220 volt circuits from the aux gen set and to the split ac/heat pump and the aux battery charger for when the PV and hopefully soon to be wind generated power are not enough to keep up.We run 8 - 6volt Rolls batteries tied by Buss bars .They are temperature and voltage monitored on the PV board and by the inverter unit.The power is inverted by a Renogy 3000 .It also has a multi stage charger built it with flow through capability .These are almost all protected by Breakers purchased here .We have a remote shallow well system that we use a soft start unit on .It lessens the instant draw on the system .It is all about power management.This is a semi detailed , general description of some of the off grid power systems we use . I am going to add this review to each one of the parts bought on here .
Juan RodrÃguez Lugo
2025-08-07 14:28:49
Excelente empaque, se ve bien
LOYD DINNEEN
2025-08-02 10:44:59
Worked great for my solar installation
John C
2025-06-26 10:55:44
I needed to wire lights for a carport using the existing 30 Amp RV hook up on the side of my shop and these breakers helped me do it correctly.
Omar Felipe
2025-05-30 12:17:34
Ok
Remy F. Avila Foucat
2025-05-15 12:09:05
Lo que promete se ha cumplido en este primer mes de uso. Bueno.
Binou
2025-04-13 17:50:45
Fonctionne très bien
Tigre_forever
2025-03-26 11:19:29
hasta el momento funcionando
Shopper
2025-02-25 14:15:45
Fine
Customer
2025-02-18 16:18:44
great
Recommended Products