Your cart is empty.
Your cart is empty.Product Description
Accusize Industrial Tools 3011 Series 2-60" Inside Micrometers Set, 0.001" Increments
Accusize Industrial Tools 3011 Series 2-60" Inside Micrometers Set, 0.001" Increments
Features
- Resolution:0.001"
- Used to measure 3 flute cutting heads such as end mills, taps and reamers.
- Carbide V surfaces.
- Rod diameter: 0.61".
- Each interchangeable rod is marked with its measuring ranges.
- Nice wooden fitted case.
Specifications
The combination of extension rods provides a wide measuring range, supplied with a standard calliper gauge for zero setting.
- Carbide measuring faces.
- Diameter of extension rods: φ15.5mm.
- Rod Diameter: 0.61"
- Accuracy: Metric(3+n+L/50)μm, (n=number of rod, L=maximum. Measuring length (mm) [Inch].
- Resolution: 0.0001"
- Each interchangeable rod is marked with its measuring range.
- Use to measure 3 flute cutting heads such as end mills, taps and reamers.
- Extension Rods: 0.5", 1", 2", 4", 6", 8". Range: 2-24"
There is a range of sizes:
LENGTH MEASUREMENT
Swiss TRIMOS, ABC-P500 High Precision Universal Measuring Length Machines
- For setting, calibrating measuring instruments , gages and measuring inside and outside dimensions minutely. Whole travels use absolutely measuring.
- Range0-550mm.
- Uncertainty of measurement: ≤ (0.15+L/2000) μm. L/mm(Millimeter).
- Repeat precision: 0.05μm.
German CARL ZEISS JENA Product 0-3000mm Measuring Length Machine
Features:
- For precisely measuring inside and outside dimensions of length L ≤ 3000mm minutely.
- Uncertainty of outside dimension measurement: ≤±(1.2+3L/1000)μm
- Uncertainty of inside dimension measurement: ≤±(1.5+3L/1000）μm. L: mm(Millimeter)
PITCH MEASUREMENT
High precision small pitch measuring machine
Features:
- Range: 0.3-1mm.
- Length: ≤140mm.
- Pitch diameter: ≤40mm.
- Uncertainty of measurement: (0.15+L/240)μm.
- L: mm(Millimeter).
ROUNDNESS MEASUREMENT
Roundness Measuring Machine
- For minutely measuring roundness, waviness,
- concentricity, perpendicularity, parallelism, and
- planeness.
- Spectrometric analyzing for surface state of parts.
- Labeling eccentricity and phase calibration of part.
- Range: bore Ф3-Ф300mm.
- Cylindrical diameter: 0-Ф300mm.
- Uncertainty of measuring: ≤0.03μm.
- The max weight of part: 10kg.
Customer
2025-08-09 14:32:04
I wanted to review this set of inside mics because they're reasonably priced and seem to work well. I have been machining for a year and need/wanted a set of inside mics for measuring bores that are too large to measure well with my telescoping gages and outside mics. I picked these up on sale for 155$ I think.For me, they were worth the money and I would recommend them to others for that need a starter set of mics or only need them occasionally.I have had the mics for a month now and used them on several different jobs. I felt like they were worth reviewing because they work well and I hope other people can save some money by buying this set as well.Pros in no particular order:Nice weight in handScale measured accurately out of boxComes with standard! A lot don'tSmooth action with good resistance so you don't accidentally change your measurementLOW PRICE, $150 compared to ~$400 for skinny rod StarretLocking knob so you don't change your measurementCons:Not super robust construction like Starret.Box is a bit mehNo support/replacement plan like you might get from big name brands.I don't go by the scale on the side but always check my measurements with these mics with my OD mics that are calibrated. These are usually spot on. I have checked my measurements with these with the CMM at work and I seem to be close. Tightest tolerances we run is usually +/- .0005 and these work for me to hit those tolerances.Tldr: cheap, work well, good feel.
Timmy Fannin
2025-08-06 13:39:04
Excellent for what I do. I'm a welder not a machinist so in the hands of a person of that trade it may be different. The numbers I get always match the machinists' paper work. Really wished I'd bought this sooner! It's got a nice case and all the pieces fit in the wholes nicely. Very simple to use too! The pieces are thick maybe over half an inch wide and are heavy. I use these inside bores over 6 inches and holds up to be knocked around welds and 500 degrees and more haven't affected the sets adapters so it's a sturdy set. Well worth what I paid.
ForeverYOUNG
2025-08-03 14:27:29
Works as expected. Case keeps things in place. Easy to use and as accurate as husband needs it to be. He says the angle of the measurement of tips is a little too flat for some of his use. But he can use it for most applications.
Luke Tande
2025-08-01 18:52:51
Great mic for the price.
Mr. Bean
2025-07-31 18:48:56
Most double check an inside micrometer w/ an outside micrometer. I was impressed with its accuracy.
charles c.
2025-07-02 11:44:40
Great value
Customer
2025-05-14 10:45:13
Worked as expected!
William
2025-04-13 12:40:39
Good product, measures accurate
JORGE ALFREDO PEREZ CASAS
2025-04-05 17:44:18
Excelente producto la calidad de la marca me ha sorprendido
Mikhail Tolstoy
2025-03-29 12:49:09
It has a great range and is great for getting into areas not easily accessible by other precision tools.It does what it's supposed to do with little fuss, what else can be desired of any tool.
aaron
2025-03-24 17:26:12
For the most part it’s a good set. The end cap on the dial side could use a better chamfer. All in all a good solid set for the price.
RM
2025-02-25 11:21:23
Well made, accurate, comes in a sturdy case, good buy
Robert Bridgeman
2024-12-13 13:39:04
The packaging is functional. The tool is quality. It does exactly what I need. I'd recommend this to anyone needing such a tool
Recommended Products
$333.00
$ 99 .00 $99.00
$55.99
$ 29 .99 $29.99