Shopping Cart

Your cart is empty.

Your cart is empty.

Acoustic Guitar Bridge Pins, Pin Remover Set, Pure Bone, Unbleached, Standard Size, Vintage Style

4.9 (11) Write Review
Free shipping on orders over $29.99

$11.99

$ 5 .99 $5.99

In Stock
  • Cutted from whole cattle bone, hard to break, handle any rude action.
  • Good tone,much better than your existing plastic parts.
  • Bridge pin total length:28mm. Head diameter:7.8mm. Collar diameter:5.33mm. Bottom diameter:4.2mm. Shank length:21mm. String Slot: 2mm. 3° Taper.
  • Without any inlaid, Vintage style.
  • A pin puller was included, your right hand man when load-unload bridge pegs.


Product Description

Bone

Vencetmat Acoustic Guitar Bridge Pins, THE STARTING POINT OF YOUR WONDERFUL MUSIC JOURNEY!

Bone

The most popular material in guitar parts

Considering the cost and performance, bone is good material for guitar bridge pin, It has good acoustic conductivity, so your guitar will get well-balanced tone. They are suitable for play fingerstyle, solo, strumming, power chord, blues, etc. which is the reason why it's favored by most guitarists.

Bone

Cut from completely bone wall

Did you know what is the best bone? The answer is: COMPLETE BONE. Bone is hollow, only the bone wall can be used to make guitar pins. You don't need any bone powder mold. Yes, all of Vencetmat's bone pins are complete, This means that it will bring the most complete acoustic conductivity.

Bone

Without any inlays, Vintage Style

Retro design, pin head without any inlay, give your guitar a classically elegant styles.

Bone original color never bleached that gives you vintage style. Also means that it has never been damaged by any chemicals, maintaining its original bone tone.

About our product materials and producing

The Nature Cattle Bone

100% High Quality Pure Cattle Bone

  • Cut from whole cattle bone, The most complete bone has the most perfect vibration transmission.
  • They are usually installed on the medium and high-end guitars.
  • Bones balance high, medium and low tones,So your guitar will make a more balanced acoustics.
  • Because of the excellent acoustic conductivity of bones, they are favored by the majority of guitarists.

Hand made producing

Why do you choose our bone pins?

  • If you try to get fake bone pins from Vencetmat, you will be disappointed.
  • We have 16 years of manufacturing experience and advanced technology.
  • Each pin is hand-made and hand inlay and has been strictly inspected.
  • Unbleached means they never damaged by any chemicals, Keep most primitive condition of bones.
  • The original color of bone and nothing inlaid gives you a vintage style.
  • Cattle bone offers balance tone, If this is what you like, Give up your exists plastic pins now, Discover surprises everywhere.

Colorful Pure Abalone Inlaid

Very Beautiful On Guitar

  • These excellent pins show you the true beauty of genuine bone.
  • Not only great improve your guitar sound, also dressing up your guitar very beautiful.
  • Package Contents:
    • Vencetmat Bone Pins x 6
    • Vencetmat Pin Puller x 1

Dani
2025-09-06 10:46:21
I replaced these a part of a project to replace the saddle and nut with bone. Are they effective, in improving. the tone? I can't really say since I changed everything all at once and not incrementally. but they are not expensive and definitely look and feel like quality products.unlike most bridge pins for sale they do not have the mother of pearl (or imitation of) dot inlays. they have a very nice clean look of bone and I like the look.if you like that look and maybe some improvement in tone - get these, they are not expensive either!
SK
2025-07-04 13:54:59
Purchased a 2nd hand Guild D120 (Westerly Collection) dreadnought, which is made in China. The pins were plastic and abused, they were pushed in so far I to stick my hand in the hole in order to push them out with a block. So I was searching for a nice set of bone endpin a that not only would sound great and give the Mahogany/Mahogany dread some life, but also fit perfectly in my new guitar, without me having to sand them down for hours or return them.Not only did these fit Perfectly, they made the guitar a bit tighter on the bass notes and added a little more sparkle and life to the treble strings…. The guitar rings out like it’s meant to, it’s an all-‘hog guitar so of course you want to keep it somewhat warm and dark — and these pins didn’t detract from that… they just gave it more life and breadth.Combined it with some Martin Retro Monels and I’m in love. Don’t hesitate, especially at this price. They look beautiful too in their unbleached state. 5 out of 5, unbeatable value.
nt
2025-07-01 14:08:04
These bridge pins are of very good quality. These bone bridge pins are consistent and very hard that contributes to excellent sustain and enhances volume acoustically. Excellent value for the money. These pins fit my gibson Hummingbird perfectly. The dimension diagram the seller shows is spot on! I slightly stained the ones I installed on the guitar. I tried to show the actual color on the foot rest. Each one of the pins are polished and buffed. All I can say is buy them! They used some excellent bone. BTW, I did not have to sand to fit any of these pins. They are a perfect fit.
John N
2025-05-17 17:44:12
I thought I’d try bone over the plastic pins the OM came with. The guitar an Eastman PCH1 has a bone nut and saddle so I installed these. I can’t hear any difference but they have to be better than plastic.By the way. Big, big thumbs up to Eastman guitars. I own two Eastman acoustics . They are unbelievably great sounding guitars. Even the PCH which is a $300 unit. Build quality is unparalleled and playability is awesome. It even came with a torrified Sitka spruce top. A $300 guitar!!! Terrific company. Yes it’s built in China. But it’s hand made and plays like a dream. I have an AC222ce also and it’s even better. Came with bone pins too..
Laura
2025-05-05 10:32:28
These worked great for my 1961 Gibson LGO. Fit was like original and didn’t have to sand them down like other customers have. Each pin measured the same with precision dial calipers. Improved the tone from the factory plastic pins. I wanted some without the inlay to match the original factory pins. I’m not a beginner, I’m 70 years old. I’m getting this guitar ready for my grandson. I will recommend these bone pins to others.
BSmith
2025-04-15 12:41:59
These are exactly what I was hoping for.Just required a little sanding for a perfect fit. They look fantastic too.
Brad Ballard
2025-04-10 15:53:30
I was a bit skeptical but I finally had a chance to put them on today after purchasing months ago. I used the same old strings and I actually think there’s a better sustain. Especially on the 3 thickest strings. Cheap easy improvement for a 40 year old budget guitar loaded with sentimental value.
Ira Tigerbaum
2025-03-22 10:46:57
They look great, but are too small diameter for Gibson J45 and Hummingbird. Falls out of the holes.
ジョージくん
2025-03-03 11:03:26
僅かにブリッジの穴に比べて細い感じです。太いという方もいらっしゃるので、当たり外れもあるようですが、やはり現物合わせが良いかと。しかし、私の場合は実用にはまったく差し支えなく、低音の重心が低く変化し、硬かった音質もよく響くようになりました。高音が良く鳴るため1～３弦はまだ未交換ですが、今のままでもバランス良く、レンジもほどほどに延びて結果は良好です。
studio-mamiya
2025-02-25 14:47:17
クラシックギターでクラシックを主に弾きますがアコギのソロも少しやってます。この会社の牛骨＆非漂白のナットとブリッジが良かったのでピンも変えました。アコギのソロ（爪で弾く）では音が「かなり」変わり、それまでの1976年 K.Yairiのプラ製ピンより高音側の倍音が伸びています。特に１弦と２弦の音が良くなったし音色のコントロールができるようになりました。ただし低音は軽くなったし、全体に音が伸び過ぎるので好みととは少し違うのですが、弦を変えたりして楽しめそうです。
2025-01-23 10:05:03
マーティンのストリートマスターに無加工で入りました。