Shopping Cart

Your cart is empty.

Your cart is empty.

Acoustic Guitar PickGuard, Beveled Edge, Thickening, Fit for Taylor Acoustic Guitar-Coffee

4.5 (12) Write Review
Free shipping on orders over $29.99

$15.99

$ 7 .99 $7.99

In Stock

1.Color:Coffee


  • The classical bird shape of Taylor, Fit for most Taylor acoustic guitars.
  • 2mm thickness, consists of celluloid and high-quality crystal epoxy resin. beveled edge.
  • Flexible surface, compare with the traditional hardness surface pickguard, It very hard to be scratched. This means although used for a long time, it will still be in good condition.
  • 3M adhesive self stick.
  • Specially tailor-made for Taylor, Also suitable for guitars that have 126mm diameter rosettes.


Important:
1. Rip off the film covered on the surface after installed.
2. Fits most taylor right handed models.

As a pickguard, the performance is unprecedented excellent. The soft body will rebound immediately when faced with various scratches and squeezes, This means it is difficult to scratch.

Just as you saw, Perfect beveled edges. The reflected light of these beveled edges can outline beautiful and smooth lines, instantly giving your guitar a sense of luxury.
The top-class member inside pickguard land!

I know my guitar model, but don't know if it is suitable, what should I do?
Suggestion come from Vencetmat:
when the diameter of the rosette of the guitar matches the pickguard, it's bingo.
measure the diameter of guitar's rosette then find matches. whatever outter or inner diameter.

The following parameters can help you find matches:
Rosette Diameter: 12.6cm(4-61/64inch),This absolutely important parameter is the criterion for judging suitability.
Max Height: 16.3cm(6-27/64inch).
Max Width: 10.3cm(4-1/16inch).

Package Contents:
Guitar Pick Guard x 1.


Shabak
2025-08-21 12:23:45
The important thing is to match the curvature to the Rosette pattern. Watch a few YouTube videos and like magic you'll be able to install it yourself. In addition to this I ordered two other pick guards from different manufacturers, one was very flimsy and could been easily the other one was midway. I returned the other two and bought another one of these for my other Zager guitar. this particular guitar is my Zager 12-string. Again the most important thing is to take your time and match the radius as close as possible. Well this particular pick card is not 100% match, it is close enough and I'm happy with it
S M Boren
2025-06-03 15:58:20
Looks great on Yamaha acoustic guitar
Michael J. R.
2025-05-15 19:24:22
I was going to replace the original pickguard on my Taylor 214 with this Amber colored guard but did not like the coloring once I got it for the 214.However I had an Orangewood Mason Live nylon string guitar with a cedar top that came without a pick guard. I tried a common guard on it but it actually seemed to dull the tone.I liked how the Vencetmat looked with the Mason and applied it after removing my first guard.The result was louder sound with the nylon strings and better overall tone. That was unexpected enhancement of the cedar but a nice surprise. Before I committed to applying the Vencetmat guard, though, I applied it with a couple of strips of painters tape to test it. So I knew I'd be happy with the result.The guard is large, so be sure your guitar has the size to accept it.
Roger
2025-05-10 12:05:52
Looks good on my eastman. Very thick pickguard. You do have to measure to see if the diameter of the rosette is correct. I measured the distance from the top edge to the bottom and the middle (from the curve for the rosette) they should be all the same. I ended up eyeballing it.
Shannon
2025-05-08 18:55:47
Pickguard is nice and thick, and the bevelled edge looks really nice not chunky. Colour is complex and bold and compliments the wood colour on my guitar. And application is easy, much easier than expected considering it is not flexible, and sits perfectly on the rosette. Very happy with my purchase.
"Mel" O.
2025-04-27 10:33:45
I absolutely love the vencemat material! I’ve purchased multiple vencemat guards and added them to my guitars that either had no pick guard or only the paper thin guards. I highly recommend these. They dress up the guitars as well as protect the finish!
Organiclee
2025-04-26 14:11:58
The quality and look are both top shelf. After watching a video or two on installation, which I highly recommend, the application of the guard when perfectly. I am thrilled with the look and utility of the guard.
Humpback
2025-03-22 17:55:40
Looks better than Taylor's black pick guard. Does not cover the exact same space as the black guard but close. Matches to the inner rosette, not the outer one.
storato
2025-03-09 17:28:37
taylerのピックガート無しモデルに装着。貼って数日ですが3M両面テープの密着は良いし、純正形状に極めて似ている。サウンドホールのアール（円）カーブが微細な誤差がありますが、凝視しないと分かりません。1方向をマスキングテープで位置決めしてから、裏のシールカバーを外すとうまく貼れます。
Howard R.
2025-03-06 18:56:36
I love it. It really dressed up my 12 string
五式戦
2025-02-24 11:02:54
使用ギター：ヘッドウェイ5130ピックガードが無いギターだった為、こちらを購入しました。厚みは結構有り、弾力が有る材質です。裏面はシールになっていますので台紙を剥がしてすぐ貼れます。しかも、3M製シールなので、何故か安心します😅ネットでもこの形のピックガードは少ない中、良い買い物が出来たと思います。
kazu55
2025-02-11 19:16:44
最近、別々のショップから、ピックガードを3枚購入しましたが、1番品質が良かった。また、この価格帯のピックガードだと、両面テープは、どこの物か解らないのがほとんどですが、このピックガードは、3Mが使用されてます。剥がれ等の心配は無いと思います。また、商品のパッケージも他の物は手作り感がありますが、こちらは、しっかりしており製品化されるのが解ります。また購入したいと思います。