Your cart is empty.
Your cart is empty.Adjustable Conveyor Roller Table,Flexible Roller Conveyor Can Handle Up To 300 Pounds Weight, Portable Conveyor Roller Table Height Adjusts Up to 36 inches
Chadrack
2025-08-09 10:54:04
I should have sent it back!I received it and didn’t open it and assemble until it was too late. After putting it together I began to wheel it out to my workshop with its own wheels and one of the welds holding the bolt flange for the wheels completely came apart.. I can’t say broke because it has to be welded first.. the welds that were attempted by some dude in a factory over seas, did not penetrate the metal. They are merely for looks, possibly even glued on to make it look like a weld. Anyway, since I was outside the return window I couldn’t return it and I welded it myself.. fast forward to the first time I actually used it and I put a piece of wood on it to roll into my table saw and another wheel assembly completely “brokeâ€. Same thing aâ€weld†with no pellet ration came apart. This one was a little dangerous and hen the first as I was pushing wood into my table saw when it happened.And then yesterday I was moving the roller cart across the shop and the 3rd wheel fell off, so that one is probably my fault for not welding the last two after the first two incidences… so yeah, i’m going To completely weld the last to and look it all over and see what else might come apart before I get hurt..
Customer
2025-08-04 17:48:43
I had some pictures of minor defects that I was going to complain about but it is not worth raising a stink over.So the good: I've gotten to use the rollers for 6 months and have been quite happy. They adjusts in height as an outfeed to use on my planer and my table saw for longer lumber. I've left hundreds of pounds of stock on it for temporary storage with no issues. I can move it around my small shop and adjust height. I have a straight edge/level with a magnetic base that I attach to the saw or planer and then I can bring the rollers to the appropriate height.The not so great: Shipping damage. One of the connecting brackets was bent. But I'm not daisy chaining these rollers so not a big deal. I did straighten the bracket with a wrench but it did cause some paint to crack off. This just matches some other paint that got chipped in shipping. Also one of the knobs was broken because of poor packing, it still works to tighten. These rollers are in a shop where thing get banged around and chipped as they get moved around anyway, so damage inevitable.The bad: a couple of the welds for the legs were really sloppy and the legs would not assemble because of the metal slag inside. It took some time with a metal file to clean out. Ultimately I used a reciprocating saw with a bimetal cutting blade to clear the obstruction. Again this is inside a workshop, so if I can't fix my tools than I'm a worthless wood worker. Still, it is a bit frustrating to have to fix new stuff out of the box.Conclusion: It would be a pain to have to repackage such a bulky item for a replacement or to get a brand name for a much higher cost that might come damaged anyway due to shipping not manufacture concerns.
Jay Warren
2025-05-17 19:06:09
Damaged packaging, Broken parts
Customer
2025-05-07 19:59:08
I've only had this product for approximately 2 months. The welds that support the wheels have already broken and this is essentially a useless piece of metal in my shop.Truly a monumental WASTE of money
Jo
2025-04-29 11:28:07
It arrived in a battered box that had obviously been opened before. Inside the cart had welded parts that were bent, an opened box of parts, and no documents of any type. I returned it immediately. Not worth it.
Jake
2025-03-06 18:52:57
I was so excited to open this conveyer roller from Amazon. however my excitement quickly changed to disappointment. It was unusable in the state it arrived. The product was thrown together with very little attention to detail. Had to send it back, don't waste your time like I did.
D. Lawburgh
2024-12-05 13:11:25
Bought 2. Had a wheel break off of each one under light use. Poor quality tack welds that broke easily. Will be returning
Mars
2024-11-21 12:50:16
This out feed table is fairly light duty; however if you’re molding or ripping 2x material it shouldn’t be a problem. I would not trust it too hold the purported 300#. The maximum height definitely can’t be more than 36 inches because that would only leave about 1 inch of square tubing above the adjustment knobs inside the legs. Past that, the adjustment knobs are at risk of bending the square tubing legs inside the upper leg section. I would be more comfortable having it at a lower height, but then it wouldn't match the height of my planer moulder. If you were ripping 4X material you would definitely benefit from making some kind of struts to strengthen the legs on this unit.There were no instructions, so I wasn’t sure what to do with the hooks at one end of the table and nut and bolts at the opposite end. I am assuming either one or the other is intended to attach to your table saw or planer moulder, or maybe that's how you attach two units together for a longer out feed.The rollers operate smoothly and the scissors expansion is very handy to have.We will get a lot of use out of this table, but if the manufacturer had put more thought and material into the design of the legs, it would be much more functional and would warrant more stars in this review.
Recommended Products
