Your cart is empty.
Your cart is empty.Automatic Transmission and Engine Oil Pressure Gauge Kit
Tony M.
2025-08-25 17:05:54
I bought this gauge to help me diagnose transmission problems and it worked great. One of the features is it's 6' long hose that reaches as far as I needed it to and then some. It comes with a great set of adapters that make hooking it up a breeze and a pouch to store it all in. It is well built and is a great addition to my collection of tools.
S. King
2025-08-06 17:11:57
I ordered this and the OTC 5610 at the same time so I could have two gauges for transmission diagnosis (there are two gauges with the OTC, but only one hose). This was cheaper than the OTC set, and I thought another brand might have some benefits of variety. The differences that might be useful compared to the OTC are that the gauge is smaller and the hose is thinner, but that's it. Other than these debatable size advantages, in every other way this set is disappointing compared to the OTC. First of all, unlike some reviewers, the one I received was not in a reusable plastic bag, but in thin plastic disposable packaging, which I received crushed (see picture). There is a picture on the package showing the contents, but no listing stating what they are. There is a leaflet inside listing the adapters included with three different sets, but it is never stated on the package which set this is. Between the picture and the unclear leaflet, I think I received everything, but that's based on my judgement, not clear information. Unlike the OTC, the sizes are not marked on the adapters. Most of the time you just grab the one that fits, but it is helpful to know, especially for the BSP size. Unlike the OTC, with each adapter in its own protective compartment in the hard case, the adapters were all loose in a plastic bag, and it shows. The bag looks like it could have torn open if shipping would have taken any longer, and the adapters look used. I looked carefully to see if this was a returned set, but I think the roughness and blemishes, including stains, are a result of poor manufacturing and the unprotected storage and transit in the plastic bag. I think the ride in the bag did not include overseas travel since this was "assembled in USA", but every indication is that simply means the overseas components were put in the flimsy packaging here. Unlike the OTC gauges surrounded by protective rubber, this gauge is bare, so be careful not to drop it so the case doesn't dent or the window get cracked. It's cheap enough for a name brand to get a useful gauge, but that cheapness is manifest everywhere. If you have the money, and a little more bulk in the hose and gauge isn't a problem, the OTC set provides so much more (including a second gauge with a different scale).
kwacasey
2025-08-03 13:56:59
I needed this to help me on my first 4L60 (700R4) rebuild, this was the best price I could find for this tool. Comes with multiple adapters to fit to test port on the transmission. I actually left it hooked up for several weeks while I straightened out some issues with the valve body. Not having used the more expensive ones I am not sure how this one compares, but I can say it served its purpose and without it I am not sure I could have pulled off the successful rebuild.
Manuel Fernancez
2025-07-27 11:55:52
good because I am very happy with the purchase made, everything was excellent the shipping was very very fast certainly needed urgently for my photo studio, the product looks good quality and robust, well only time will tell .. but everything works perfect, I hope to continue shopping at your store and that is as timely as it is now thank you very much for everything!
matt
2025-07-26 13:15:28
Everything is there and appears to function, but it’s been previously used and returned. There is grease and finger prints on some of the fittings. Package was clearly forced open without tearing the label. Not a big enough problem to return it but it’s annoying to pay for a new part but get something used. Hopefully it still works.
ronny james
2025-07-15 12:34:45
I am going to use this for checking transmission pressures!
Fairlane 55
2025-06-28 10:10:08
First time to use one of these. I do all my mechanic work, put an A.O.D.in a 55 ford car, used this gauge along with the instructions, and no problem with the hook-up, as the proper fittings were included. I used the guide for the transmission settings, and the car shifts perfect. Very happy.
Paul H.
2025-05-13 17:27:45
This is a relatively inexpensive tool, that does the job it advertises it will do.I used this to check the line pressures on my 48RE transmission. It worked perfectly. The gauge needle did not flutter, it responded instantly, and did not leak.It comes with a small sackful of adapters, most of which I will probably never use, but it's nice to have them. I suppose one could go purchase a gauge, get a hose made at the local hydraulic shop, and purchase the adapters as needed. Perhaps some money could be saved that way, but it sure is convenient to get it all in one place.Cons :- the fitting at the non-gauge end is a fixed fitting. It does not swivel. This means that the entire length of the hose and gauge must be turned to screw this into whatever it is one wishes to test. Perhaps a minor flaw, but annoying. I would pay an extra bit to get a fitting that can be screwed in without that hassle. However, that type of fitting is more fragile, and more likely to leak.- The hose is 6 feet long or so. I really would like 8-10 feet, or an optional hose. That would allow me to hold the gauge and drive whilst it is still screwed into the test port. I may go to the local hydraulic shop and get one made - with a different fitting.All in all, a nice tool for the job. I would give it 5 stars if the hose was longer, and the test-port end would turn independent of the hose.
Shaun
2025-04-20 20:00:28
Opening the package I notice a lot of small metal shavings and residue on most of the fittings which made me question if I even wanted to use it at all on my car. After cleaning everything very closely I went ahead and gave it a try without any problems.
Eduardo
2025-03-09 15:52:29
No sirve El manometro, no da la presion correcta. Lo conecte para checar la presion de aceite de motor de una xtrail y Al trabajar en ralenti me marca 0 psi. Y El motor trabaja correctamente, para la presion que marca.
Paul Miernik
2025-03-08 10:04:48
All you need to check engine or transmission oil pressure. The gauge could have higher resolution (more increments) as some vehicles have a factory specification of 4 psi oil pressure at idle, and that hardly registers on this gauge, if you need something more precise get a dedicated gauge for engine oil pressure, but for the dual purpose that it was made for, this tool is excellent! The fittings that come with it cover a wide range of oil pressure ports, and of course the standard domestic oil pressure switch port. Amazon by far has the best shipping, and quickest online deliveries!
IslandJCW
2025-02-19 15:58:29
As described...build quality is ok6' hose and a selection of fittings includedCan probably make up same kit on your own for less if you have access to parts store
Richard Loehn
2024-11-25 17:41:40
Thanks it work well for less that I'd have to pay at a garage to check my oil pressure, and get to keep the tool for next time , perfect.
Recommended Products
