Your cart is empty.
Your cart is empty.Product Description
FlaJimAk
2025-09-04 11:18:31
fits well & decent quality. good protection/storage for Fluke
Kindle Customer
2025-09-01 11:55:50
Bought this in lieu of a soft case for my Fluke 87V Max digital multimeter. The meter fits snugly in the case in width and thickness. The case is longer than the meter, but that's fine. The temperature probe and test leads fit nicely in the case with the meter. Can't beat the price, and I'm happy with the stiffness of the case material.
Danny D.
2025-08-19 13:42:40
I wanted a case to protect my voltage reader and found this one. It’s appears to be well made. Has a semi-solid feel about it and should serve many years in a homeowner toolbox. I have no complaints with the case
Consumer
2025-06-30 13:24:24
Great value for the money. A little small for my 376fc but it fits and closes. Not much room for lead storage. Would be perfect if it was 10% bigger
David R.
2025-06-26 13:44:17
I was looking for a case to keep my RigExpert AA600 antenna analyzer for casual use/protection. Granted, it doesn't offer any padding to protect the device but it will offer as much or more than the blue shoulder bag that comes with the RigExpert.I have a dust cap anchored to the frame of the analyzer which adds a slight bit of length to the unit and was finding it difficult to find an appropriate sized case. This one doesn't disappoint, of course, time and trial may vary, first impression, I'm very pleased.
Kyle
2025-06-20 13:41:10
I actually bought this to fit my 375FC, but I have a 1587 floating around without a case. It fit everything perfectly! Happy with the price and size!
Sentinel786
2025-06-19 19:15:01
I prefer to leave the leads plugged in on the Meter so it can be used immediately. And I have a small adjustable wrench, small screw drivers, Electrical tape, Wire stripper and a few wire connectors that I threw into the case as well. They all fit in this case with enough protection for the meter inside.
Gregory R. Hill
2025-06-08 10:43:25
This case is a good value at around twenty dollars, but it is definitely lacking in quality. It is a bit flimsy, and does not seem like it will hold up very long. I am ok with it because it is for my Fluke meter which is pretty tough on its own, and I keep it in a large box with my electrical tools. I bought this case just to keep it from bouncing around in the larger box. However, if you need a stand-alone case to protect your meters, I would not recommend it.
Trevor D
2025-05-22 16:45:31
Fits my meter good could be a little bit bigger for the extra part with the meter. lead wires. Pro points and Gator connectors. A little bit tight in there.
FlaJimAk
2025-05-17 15:08:21
fits well & decent quality. good protection/storage for Fluke
Kindle Customer
2025-05-09 13:47:40
Bought this in lieu of a soft case for my Fluke 87V Max digital multimeter. The meter fits snugly in the case in width and thickness. The case is longer than the meter, but that's fine. The temperature probe and test leads fit nicely in the case with the meter. Can't beat the price, and I'm happy with the stiffness of the case material.
Danny D.
2025-05-08 18:30:58
I wanted a case to protect my voltage reader and found this one. It’s appears to be well made. Has a semi-solid feel about it and should serve many years in a homeowner toolbox. I have no complaints with the case
Consumer
2025-05-06 10:52:52
Great value for the money. A little small for my 376fc but it fits and closes. Not much room for lead storage. Would be perfect if it was 10% bigger
David R.
2025-04-15 15:35:00
I was looking for a case to keep my RigExpert AA600 antenna analyzer for casual use/protection. Granted, it doesn't offer any padding to protect the device but it will offer as much or more than the blue shoulder bag that comes with the RigExpert.I have a dust cap anchored to the frame of the analyzer which adds a slight bit of length to the unit and was finding it difficult to find an appropriate sized case. This one doesn't disappoint, of course, time and trial may vary, first impression, I'm very pleased.
Kyle
2025-04-10 16:25:43
I actually bought this to fit my 375FC, but I have a 1587 floating around without a case. It fit everything perfectly! Happy with the price and size!
Sentinel786
2025-03-25 17:07:48
I prefer to leave the leads plugged in on the Meter so it can be used immediately. And I have a small adjustable wrench, small screw drivers, Electrical tape, Wire stripper and a few wire connectors that I threw into the case as well. They all fit in this case with enough protection for the meter inside.
Gregory R. Hill
2025-03-19 12:54:46
This case is a good value at around twenty dollars, but it is definitely lacking in quality. It is a bit flimsy, and does not seem like it will hold up very long. I am ok with it because it is for my Fluke meter which is pretty tough on its own, and I keep it in a large box with my electrical tools. I bought this case just to keep it from bouncing around in the larger box. However, if you need a stand-alone case to protect your meters, I would not recommend it.
Trevor D
2025-02-27 12:06:27
Fits my meter good could be a little bit bigger for the extra part with the meter. lead wires. Pro points and Gator connectors. A little bit tight in there.
Jesus
2025-02-15 15:16:54
bastante amplio , en general buen producto
PedroV
2025-02-09 18:26:04
Muy buen producto, llego en excelente estado y mucho antes del tiempo. De muy buena calidad con buen espacio. Lo recomiendo
Jesus
2024-12-11 12:44:02
bastante amplio , en general buen producto
PedroV
2024-12-05 21:31:58
Muy buen producto, llego en excelente estado y mucho antes del tiempo. De muy buena calidad con buen espacio. Lo recomiendo
Recommended Products