Your cart is empty.
Your cart is empty.The Albion #873-3(10 PACK) is a ten pack of Black Cone Nozzles made to fit Albion B-Line guns.
Pejutah
2025-09-04 14:24:46
I have had an enormous rodeo issue in the house this season. It's the most dreadful thing I've ever been through on the home level. Horrid. I've narrowed down entry points, and have begun sealing them off. The problem remained of areas under the builder grade garbage kitchen cupboards. They were zipping over the empty areas between cupboards and between bottom of cupboards and the kicks. SO? I cut mdf and lined it with hardware cloth, got out. my compressor and stapled the boards up over the empty 1/2" area under the cabinets, but could NOT do the same for the spaces between cupboards due to the angle of the opening. I ended up coming to Uncle Amazon to look for some kind of angled staple gun, but can't afford that (this whole mouse thing has taken 5 grand to deal with so far,) so I kept looking. I shoved metal wool into the cavities. Found this amazing angled caulking doo dad here and Gotta say, although it's weird working upside down, I was able to lay a bead or two of caulk over the top of the metal wool, and last night was the FIRST night in three months I have not caught a mouse in a live trap OR running on my sink or floor. I think these are very sturdy, but found impossible to clean. I'll order more in a heartbeat when I run through all three of these. VERY useful product and fits a regular caulk canister from big box stores easily. HIGHLY recommend. The photo shows the area I tried to foam to fill. NOPE. This with the metal wool worked far less messily.
M. Drake
2025-08-31 10:00:40
I got this to seal up some rodent screen in an awkward spaces under house. Was able to get the glue in places I could not have gotten the calk gun. Totally worth it.
Zenithon
2025-08-30 14:06:29
I had a tight spot that the nozzle of the latex caulk couldn't reach. I did a quick search and found the three pack of "Albion Engineering 935-1 Angle Shot Green Plastic Nozzle for 1/10 Gallon Cartridges". I was a little confused by the 1/10 gallon thing. The caulking I was using is for the small/normal size caulking gun, not the large caulking gun, and said it had 10.1 oz in the tube, which is less than 1/10 gallon. No matter, the product worked great. The Albian Engineering nozzle fit right over the nozzle of the caulking tube and the round flange at the end fit perfectly into the end caulking tube so it was held securely in the caulking gun. It extended the reach significantly and worked perfectly. In fact, it worked so great, that after I was done with the hard to reach spot, I just left it on and finished out the tube of caulk in other spots that didn't need the extended tube. It's a fantastic solution, and I will keep a couple of these on hand for the future.
Ching-Ho Cheng
2025-08-17 18:53:44
This "expensive" but very useful nozzle was great. It allowed me to access the tight and narrow area behind the old/bulky radiator and the narrow area between the bath tub and vanity. It never came out of the caulking tube because it was held down by the caulking gun. It just slide into the tip of the caulk (10 oz) and the insert the caulk + this nozzle into the caulking gun. Then you are good to go.
Ryan A.
2025-07-22 11:41:41
They are great for those tight and hard to reach spots. I would give 5 stars, but they are a little pricey and for that price, I wish they were a little beefier. They aren't much more sturdy than the generic white tips that are included some brands of 20oz caulk (i.e. Hilti). I think they will break or crack the first time it falls and lands on the tip. We shall see. I use mine in a 20oz sausage gun, just take a regular white tip that I mentioned and cut the tip completely off all the way at the bottom where it starts to taper out and slide it over the angled tip to use it kind of like a washer to fit in the ring of your 20oz gun. Works perfectly.
Polished
2025-07-05 18:22:03
Made caulking around a toilet incredibly easy.
Justin Kessler
2025-06-23 17:02:00
I love these extensions for hard to reach places. Well worth the money.
Samtheburd
2025-05-11 16:23:25
Got this to do lap sealant, too bad it's not cleanable though it will pay for it self in time saved on jobs
A&W
2025-04-24 11:01:25
threads on 3/4" coupler are very poor quality . would not trust this mixer under pressure
Hemi Power
2025-03-05 20:01:55
These work great to apply sealant where the straight type just cannot get the job done on certain moldings I installed. First time I tried These and worked out great. Will buy more for keeping in stock when needed.
charleyb
2025-02-20 17:31:43
An amazing product that accurately tapers the goo down to the desired outlet size. However it should come with a safety warning label about using a utility knife to cut the tip - sooo dangerous.
Henry Wong
2025-02-15 10:33:15
Arrived as described! Well made.
HanktheBuilder
2024-11-26 18:06:32
Didnt fit on our regular sausage gun. Ring too small.
Recommended Products
