Your cart is empty.
Your cart is empty.Allstar 3/8 inch NPT Inlet/Outlet Chrome Finish Canister Type Fuel Filter has a fuel filter which is a canister-type filter. It has a 3/8 inch npt inlet/outlet. It includes a replaceable 10 micron element. The flow rate is 90 gph and has a great looking chrome finish. It is backed by a 90-day limited factory and sold individually.
Rick Benveniste
2025-07-24 12:29:59
Made well, easy mounting and easy to change filter. Seems to be identical to more expensive units that look the same.
Penny Davis
2025-06-26 21:20:57
Replaced my leaker with thisun
Rodny
2025-06-15 12:19:14
Great filter 100 bucks less than from identical except price .
anonymous
2025-05-28 12:32:40
The die cast housing is not quite as thick as the original fram version or as nicely cast. However definitely good quality for the money. Works with the wix 33900R replacement filter.As for leaking issues I have used the following ...For some reason the soft copper washer that should be under the head of the bowl bolt tend to disapper.... if leaking is from under the bolt head add a copper washer if it still leaks use a nylon or lead washer instead. If its leaking from the bowl check the gasket for deep cuts, if it's in good shape apply a thin layer of oil and spin the bowl gently as it contacts the gasket finish by tightening the bowl bolt head .
F. Yancey
2025-05-19 11:34:44
seems to be made of quality material. works as expected
Customer
2025-05-12 15:45:05
Fit perfectly on my hydroplane.
Moparlee
2025-05-11 10:35:52
Awesome sauce!
FranklySpeaking
2025-05-07 11:06:34
UNIT WORKS AS IT SHOULD. NO LEAKS, SEEMS SOLID THUS FAR.FINISH COULD BE BETTER HOWEVER. THIS MAYBE WHY ITS LESS$ THAN ITS COMPETATOR NAME BRAND MODEL SEEMS POORLY PAINTED & PLATED, NOT BAD, JUST A LITTLE RUFFER THAN I WOULD HAVE LIKED.
Rick Benveniste
2025-04-14 15:44:48
Made well, easy mounting and easy to change filter. Seems to be identical to more expensive units that look the same.
Penny Davis
2025-04-11 14:13:27
Replaced my leaker with thisun
Rodny
2025-03-31 14:12:49
Great filter 100 bucks less than from identical except price .
anonymous
2025-03-25 12:14:54
The die cast housing is not quite as thick as the original fram version or as nicely cast. However definitely good quality for the money. Works with the wix 33900R replacement filter.As for leaking issues I have used the following ...For some reason the soft copper washer that should be under the head of the bowl bolt tend to disapper.... if leaking is from under the bolt head add a copper washer if it still leaks use a nylon or lead washer instead. If its leaking from the bowl check the gasket for deep cuts, if it's in good shape apply a thin layer of oil and spin the bowl gently as it contacts the gasket finish by tightening the bowl bolt head .
F. Yancey
2025-03-24 13:48:18
seems to be made of quality material. works as expected
Customer
2025-03-22 15:16:33
Fit perfectly on my hydroplane.
Moparlee
2025-03-18 15:14:42
Awesome sauce!
FranklySpeaking
2025-02-27 18:02:51
UNIT WORKS AS IT SHOULD. NO LEAKS, SEEMS SOLID THUS FAR.FINISH COULD BE BETTER HOWEVER. THIS MAYBE WHY ITS LESS$ THAN ITS COMPETATOR NAME BRAND MODEL SEEMS POORLY PAINTED & PLATED, NOT BAD, JUST A LITTLE RUFFER THAN I WOULD HAVE LIKED.
Customer
2025-01-22 10:05:39
Very good quality looks good will be a nice feature on my coupe
Paz Nova
2025-01-20 16:31:45
Great Quality product as described.Delivery time was pretty quick considering it was off shore delivery .
Mike Bailey
2024-12-26 16:04:58
I bought this to replace my now rusty 30 year old Fram filter housing on my race car, I was disappointed that the rugger washer/gasket on the bottom did not seal against the center post in the filter leaving a wide gap for any jet clogging debris to pass through (glad I inspected it before use). I ended up using a rubber grommet that fit snugly against the center post and gave it light lubrication so it would slide on the post and seal against the filter (fortunately I had a selection of grommets on hand to choose from).
Customer
2024-12-24 19:36:36
Very good quality looks good will be a nice feature on my coupe
Paz Nova
2024-12-23 17:41:23
Great Quality product as described.Delivery time was pretty quick considering it was off shore delivery .
Mike Bailey
2024-12-22 11:35:39
I bought this to replace my now rusty 30 year old Fram filter housing on my race car, I was disappointed that the rugger washer/gasket on the bottom did not seal against the center post in the filter leaving a wide gap for any jet clogging debris to pass through (glad I inspected it before use). I ended up using a rubber grommet that fit snugly against the center post and gave it light lubrication so it would slide on the post and seal against the filter (fortunately I had a selection of grommets on hand to choose from).
Recommended Products
