Your cart is empty.
Your cart is empty.Product Description
KP
2025-08-23 16:24:45
I actually use this for loosening and pulling up touch screens on tablets/phones. It's much more effective than a hair dryer, it's easy to use, and it's pink!It doesn't overheat, it isn't very loud (my hair dryer is WAY louder) and if your hand slips, the area around where it emits heat is not too hot to the touch.It does not have multiple settings but I can't imagine what you would need it to get hotter for. It's much more reliable than those "heavy duty" heat guns that have broken on me after a few uses. I'm very fond of this product and highly recommend it to anyone looking for an inexpensive heating mechanism.
MIGirl
2025-08-05 09:11:25
This heat gun works as expected. I am using it to apply shrink wrap and so far it works quickly and maintains a steady temperature allowing me to apply the shrink wrap properly.The only suggestion I would have is that it would be great if there were a safety guard available that extended out several inches from the heat gun, however that is not a typical heat gun accessory, and not at all a criticism of this product. With what I use this for, it would be particularly easy to burn myself as i must move the items that are being heated while remembering to keep my arm out of the line of fire, so this is purely wishful thinking on my part in case anyone happens to know of an accessory like this or the company is searching comments for ideas.
Lakaya M. Peeples
2025-08-01 13:38:48
This is my second one. I have 3 heat guns... one broke, different brand. then I bought ZAP which works great. But , because the first one is now behind a filing cabinet where I cannot reach it...or lift it....I bought another Zap! It works, it's dependable, it's brightly colored so you can spot it. Even if you spot it in a location it's gonna require someone to move a 90 pound cabinet...it won't blend into the wood work. The guard, warning labels, and on/off toggle switch is good too. Safety features are always a plus. And it's inexpensive so if it falls behind a cabinet.... easy to replace in a pinch.
L. Mountford
2025-07-29 09:53:33
I'm new to heat embossing with embossing powder on cards, and this is my first heat gun, so I can't really compare it to any other brand. So far, I'm very happy with this!It doesn't take it any time, really, to heat up to "full strength" -- just a couple of seconds. This sucker gets HOT, so if you're new to this, it might take a bit of practice to figure out how to hold the paper up while attacking it with the heat gun. You absolutely do NOT want to leave the paper on the table while running the heat gun over it -- no, I didn't make that mistake, but I have a friend who did, and she ended up having to get her table refinished.It really heats evenly, and does a great job of melting the embossing powder quickly. It has a little wire "rest" so that you can put it down on the table without the hot bits touching the surface.One little warning: when you use this the first few times, it WILL produce some smoke, and it may look like a lot. But just give it time, and that will dissipate. It took mine 3 "sessions" to get rid of all the smoke, and it's fine now. I've made 6 cards of different designs with it, and by card #4, the smoke was gone. No further problems with it.Mine is still relatively new, so I can't really speak to its durability. If I have a problem with it, I'll edit this review to reflect that.
Ruth
2025-07-19 17:37:49
Love this I bought this one for my friend
Lane Springer
2025-07-12 15:10:38
Helps project parts dry so quickly and effortlessly!
cckbella
2025-06-24 21:03:59
I purchased this heat gun for many projects, it heats up fast and it works great! The only thing that concerns me (I'm always cautious when I use this) is how hot the heat gun gets at times. My first few uses it began lightly smoking (at the tip where the heat comes out) when I turned it off. However, it no longer smoked after those first few uses and my projects come out looking great.
MLC
2025-05-17 20:29:45
This is the second one I have bought. I have used this embossing heat gun almost daily and really put it to work. My first one lasted a little over a year and a half with daily abuse. I was so happy with its performance I have since bought another one. The tip can sometimes get a little melted, and I am sure it is my fault as I really use this thing for more than crafting, but if you use it for prolong time my plastic tip sometimes gets overheated and starts to melt inwards so I have to let it cool down. So this should last you forever if you are doing only light crafting with it.
Lolo
2025-05-14 20:03:24
Easy to use, works well, I haven't had any problems. It's the perfect size to hold comfortably, heats up quickly, and I haven't noticed any "burning plastic" smell I've noticed with other craft heat guns.
Kunde
2025-03-24 15:05:22
Versand super,kam 2 Wochen eher.Am Anfang stinkt sie ein bisschen, danach alles top.Man sollte nur daran denken, noch einen Adapter zu kaufen, da das Produkt einem AMERIKANISCHEN STECKER hat. Also für deutsche Steckdosen habe ich für 1€ einem Adapter bestellt.
Anita Watson
2025-03-13 17:29:51
Heats up fast and does a great job melting my embossing powder
Dianne Worley
2025-02-24 15:45:19
This works well and has good bang for the buck. It arrived early and is as described. It is light and easy to use.
Lyra Tabernilla
2025-02-17 16:40:43
When I first tried it, it heated up super quick and did the job right away. The only downfall is that it omitted a 'burnt hair'-like smell to it.
Recommended Products