Your cart is empty.
Your cart is empty.Product Description
Looking for a sub box for your hatchback or coupe? Our hatch enclosures are ideal since they direct the bass waves at an angle towards the rear of the vehicle to produce maximum performance from your subwoofer(s). This model enclosure is ideal for entry and midlevel subwoofers since mounting depth can be a problem on large magnet subwoofers. This is a single 12″ sealed enclosure which means it's designed to deliver tight accurate sound quality. Just be sure to check the air space recommendation for the subwoofer(s) you plan to use.
You will not only see a difference in the quality of the boxes we build, but you will hear the difference and that is what is it is truly all about.
Our boxes are made from precision cuts of MDF. They are then liquid nailed, nailed and completely sealed. We then wrap them with high quality carpet that matches most vehicle interiors. All Boxes feature high grade spring loaded terminal cup(s) for the absolute best connection possible. All the custom series enclosures are made to fit precisely into your vehicle to the get the max performance from every extra inch of wasted space.
Specifications:
- Single 12" Sealed Hatchback Sub Box
- Mounting Depth: 10-1/2"
- Air Space: 1.50 Cubic Feet
- Sealed Enclosure
- Dimensions: Width 22-1/4" x Height 12-1/2" x Depth One 10-1/4" x Depth Two 14-3/4"
- High Quality Binding Terminal Cup (Accepts Banana Terminal Plugs OR Bare Wire 'up to 10GA')
- Sealed Design Produces Tight Sound Quality Bass
- High Quality Gray Carpet
James
2025-07-26 14:27:22
This is the box you are looking for. Great value, good quality and safe fast shipping!
Joshua Shytle
2025-05-08 18:50:14
I bought two of these, since I'm installing systems in two cars. The subs fit perfectly in the boxes. There was a slight fishy smell, but that's just the adhesive/sealant. Wasn't that strong of an odor though. The boxes aren't wired, but I just removed the terminal and soldered speaker wire to them, and put the terminals back in, took less than 5 minutes. I would recommend these for sure.
Rick and Crystal Landavazo
2025-05-04 13:15:44
My Rockville W12K6D4 did not fit. I had to sand grooves into the box to make it fit. Sounds great now that it's all installed though. Quality seems great.
User245334
2025-04-27 14:08:06
Arrived in unmarked box, but offered a very clean fit between subwoofer and cutout.Terminals aren't for BIG power but will fit 6 gauge wire if you work at it. Sealed terminals and glue all around.Didn't notice any fish smell. It smells like MDF and glue and *might* offgas in hot weather, but thats pretty normal for anything made with MDF and glue.Quality carpet installation all around enclosure.If it's made in usa, this is an absolute deal for 50 bucks.
E. Humphreys
2025-04-23 11:49:50
I put a deep excursion 12" sub from Gold wood in this box, a long with an Attend 400 watt amp. The box is sturdy, and I know this because I had to cut a hole in the side to mount the amp in the box. The carpet is glued down very well, and was a bit of a bear to trim around the amp.The box itself is well sealed, with all seams caulked. Plenty of air for a sealed sub, and the sub really hits hard. Overall, can't beat this box.
db
2025-04-09 18:30:20
Very unfortunate that I write very many Amazon reviews and this box works as intended it is wrapped well and sealed with caulking on the inside unfortunately the moment I took it out of the box it smelled like rotten fish and it is almost unbearable once it was put into the car.
andrew
2024-12-28 16:11:43
Good punchy box for entry level subs...cant go wrong here
Magnus
2024-12-14 18:35:00
Wow where to begin. I bought this because it was the right height for the corner of the trunk of my car. What a mistake. It came out of the box with torn carpeting, just like the others have said. I could see voids in glue joints from the inside of the box as well. I caulked the inside & got some caulk on the front of the carpet. Then I decided what the heck, "I'll just strip the carpet & rhino line it like I wanted in the first place" The car is a 65 Fairlane I plan to show so appearance is important. Well when I did that I noticed it was really cheap sup-par MDF. Really low grade stuff. Oh and it's super thin the front is 1/2" the rest is thinner 3/16". Not what you want for a hard hitting sub. 3/4" is desirable. 5/8" is livable. This is junk. Oh & the only screws in the whole box hold in the terminal cup. There is no way this would hold up for a long time under any big power. It would flex the thin walls and eventually break one of the poorly glued seams. I was considering putting 500w RMS in this thing through a Kicker 12" CompR. Now it's going into the garbage. I would say you get what you pay for but the way this is built it's overpriced. You'd be better off with cardboard. I will end up buying an A-Trend box or a Belva & downsizing to a 10".
Recommended Products
$142.72
$ 56 .99 $56.99