Your cart is empty.
Your cart is empty.Product Description
AmeriLite only work with highest tier manufacturer with over 30 years of experience in automotive lighting. Our factory known for their quality, durability and innovation with CAM/CAM design and testing in house using multimillion dollars equipments ranging from photometrics, temperature & humidity to package drop test. Safety is our factory main goal and all of our products are DOT and SAE compliant with annual inspection that exceed FMVSS No 108 / ISO 9002 / QS 9000 requirement.
Benefits:
- Improve Visibility
- Enhance Safety and Vehicle Appearance
Temperature & Humidity Test
To ensure that the unit can withstand a wide range of temperature without reduce light output safety.
Dust Test
To ensure the unit is preperly sealed against harmfull road dust and debris.
Salt Spray Test
To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.
Air Flow / Moisture Test
To ensure that the unit do not cause moisture buildup leading to reduce visibility.
Gary C
2025-08-04 12:02:16
I purchased this set of tail lights to replace the dirty and ozidized originals. I purchased this truck new in 2000 and, after looking at the price of new trucks, I decided to give mine a facelift. After watching a couple Youtube videos I decided to purchase these tail lights even though the Amazon fitment guide said they would not fit. NEWS FLASH......They fit great. I also purchased a LED backup light bulb to intall in these lights on the recommendation of a YouTube video to increase the brightness. The hardest part of the project was removing the old harness. The clamps that hold in the wire loom were old and a real pain in the butt to get them to release. On the drivers side, after fighting the clamps for a while I just cut them off and replaced them with zip ties when I routed the new wire loom. To make the installation under the truck bed easier I did lower the spare tire (it also gave me the oppurtunity to check the tire pressure). The whole project took about 1 hour and the result is amazing. It really did spiff up the look of the truck and everything works perfectly. The new tail lights have 4 bulbs and the old one had 3. Don't worrry about that. The running light on the new tail light just works with the turn signal. The packaging was good and the delivery was very quick. The price included all new light bulbs as a bonus, however like I said, I did replace the backup bulb with a LED that I also purchased on Amazon. It was a very easy project that was made easier by watching a few YouTube videos. If you have a 99 - 02 Silverado I would recommend you purchase these tail lights to give your truck a more modern look.
Old Movie Watcher
2025-07-03 18:12:17
My 2004 Chevy pickup tail lights were getting pretty 'tired' looking, found these units at a good price (non-Dealer). The hardest part in installing is getting at the 'plug-n-play' junction fitting under the left-rear fender. It's kind of tight, and the 'old' unit plug-in was a bugger to remove. Once past that point, two screws and you're done! They look great, work as supposed to and actually improve the looks of my old truck. Recommended.
Mitchell
2025-07-01 10:25:30
These lights fit great on my 2001 2500HD. Look great, easy installation, plugged right in. We'll see how they hold up.This picture shows new one installed, with original next to it.
Adrian
2025-06-09 16:23:28
About 2 months. Fit snug but they’re fairly squared up. Light up great and don’t get any moisture. Did not use the wiring my stock sets were good but these seem pretty solid.
MoConsumes
2025-05-30 11:26:56
Shipped quickly, fits perfectly on my truck, bulbs work, looks nice, super easy install.... except that it would be nice if it came with screws. My old tail light screws were completely rusted and unusable, so I had to go buy new ones from Autozone; as this new tail-light assembly kit did not include them. Not a big deal, just an extra step that I wasn't expecting.
scott p
2025-05-17 19:07:29
These fit perfect after playing with the metal clip a little. The harness fit great and even come w bulbs. It’s a no brainer. Harness, bulbs, lenses, great price
sfrenchfl
2025-04-20 18:36:21
As stated, clean fit, just what I needed.
D. Crites
2025-03-31 13:32:04
They arrived quickly, and were very well packed. It took only about 20 minutes to install them. they came with new wiring harnesses which was a plus, but I just used my old ones since they worked fine and plugged right into the new tail lights fine. I'll save the new harnesses in case I ever need them in the future. As for the tail lights, they look beautiful, and did wonders for the appearance of my truck. they fit extremely well, and have uniform gaps all the way around where they meet up with the body of the truck. The screw holes were located spot on. My old lenses were cracked, badly faded, and separated. just plain ugly. My truck is in excellent shape, so these lights make it look close to new. Needless to say, I am thrilled with them. Highly recommend them.
Kevin
2025-03-25 09:19:39
Excellent price for what you get
Customer
2025-03-04 12:55:29
tal como se describe, calzó perfecto en mi silverado 2005
Tracy C.
2025-02-07 12:18:39
It was
Customer
2024-12-05 15:03:36
Easy to install and fits great!! Very happy with them.
Recommended Products