Your cart is empty.
Your cart is empty.Product Description
AmeriLite only work with highest tier manufacturer with over 30 years of experience in automotive lighting. Our factory known for their quality, durability and innovation with CAM/CAM design and testing in house using multimillion dollars equipments ranging from photometrics, temperature & humidity to package drop test. Safety is our factory main goal and all of our products are DOT and SAE compliant with annual inspection that exceed FMVSS No 108 / ISO 9002 / QS 9000 requirement.
Benefits:
- Improve Visibility
- Enhance Safety and Vehicle Appearance
Temperature & Humidity Test
To ensure that the unit can withstand a wide range of temperature without reduce light output safety.
Dust Test
To ensure the unit is preperly sealed against harmfull road dust and debris.
Salt Spray Test
To ensure that the unit can withstand against oxidation caused by salt on the coastal area and from winter condition.
Moisture Test
To ensure that the unit do not cause moisture buildup leading to reduce visibility.
Madison S.
2025-07-24 10:54:56
The lights on my Nissan Altima 2015 were absolute crap. I changed the light bulbs and the lights were still soooo dim. It was dangerous to drive with those lights. Apparently there had been a recall on the lights many years ago but Nissan didn't notify me about it. So I purchased these lights for an amazing price! I took them to my local mechanic and they were able to replace the lights! The lights have held up for the past 3 years now. They fit perfectly in my Nissan Altima. The lights function well, are clear, and shine bright. I have not had to change the lightbulbs yet. So grateful for Amazon supplying this product as I would have had to spend way more money at Nissan to get them fixed.
Customer
2025-06-17 13:20:03
I bought these for my 2015 Nissan Altima. Came well packaged will lots of thick cushion. There were no instructions but easily found instructions on Youtube for my 2015 Altima. Came with bulbs already installed which was handy not dealing with 9 year old crusted over ones being removed. Huge difference in lighting the road again vs old ones that had aged and burned off reflective surfaces. Have a friend help hold the bumper while you disconnect/reconnect the wiring since car does not have very long wires.
Ted Felix
2025-02-22 11:22:50
These seem to always be aimed really low when made. Takes a lot of turns to aim them. I marked the headlights in the garage before I replaced them, then used those marking to aim the new ones. Probably took more than 10-15 turns to get the right side aimed. Clockwise to raise.But, basically, no complaints. Really bright compared to the old, worn out ones. Definitely safer.Note that these are easily disassembled, and you can just get new projectors for your old assemblies. It's another option to consider. A little more time consuming as you'll be disassembling the old and installing the new projectors, but there are a number of very high quality projectors available from various suppliers (e.g. lightwerkz, etc...).
Katia berdugo
2025-01-04 11:08:24
Perfect packaging good product
Teresa B Harkins
2024-12-31 16:57:30
Product arrived intact with great packing. Installed easily and now I can see!!
Ark
2024-12-08 18:37:07
The media could not be loaded.
DSh
2024-12-06 17:14:47
The Nissan Altima design is extremely bad, one needs to disassemble a significant part of the car to get access to the headlight bulbs in order to replace them. I'm not even talking about the entire assembly replacement, it did cost me a fortune to get it installed! But the replacement headlights work pretty well, especially together with the LED bulbs. The installer was SHOCKED how bright the new headlights are even in the sun light! I don't regret installing this set, worth every penny! It's such a pleasure to drive at night now. The only complaint is the way of how we have to adjust the height of these headlights. I used a pretty long screwdriver to adjust the driver side assembly, but I cannot do that with the right assembly, I can see the wheel with the teeth, that I need to turn, but the screwdriver only scratches it and doesn't move at all. A small hole under this wheel would be helpful to keep the screwdriver in place so it could be rotated in the desired direction and the headlights would be little higher, than they are now. Actually, instead of this wheel with teeth it could simply just be a screwdriver head so any + screwdriver could be used way more efficiently.
Daniel Pierce
2024-11-28 14:37:52
They fit perfectly and make car look newer
Recommended Products