Your cart is empty.
Your cart is empty.Product Description
Be Bold, Be Colorful
Sorgon
2025-08-30 12:33:15
Quality prints and speed are great.Setup was not bad once you read through the manual. I got this printer without ACE but will be making the purchase in next few months. If you can get the combo with ACE do it.Slicer program can take some time to understand if you are new. Just read and take your time google terms you do not know and you will be up and printing in no time.The auto level is a big game changer as I come from older Ender series where we use paper checks the nozzle distance.One major recommendation right off the bat - Buy/Use some vibration dampening pads for your table and the printer. This is a powerful slinger and will cause strong shaking / vibrations at times. ( I got them on Amazon about 10 to 12 bucks )
Customer
2025-08-29 11:21:53
This printer was easy to set up. Print quality of the banshee was amazing for the speed that it did. Didn’t require any support to do banshee. Waiting for the four color to come in. maybe buy the additional four color in the future. And also when the cobra three max is available, then I would buy one of those also. If they got the 420 x 420 and I’ll buy that one.
Kurtis Stasik
2025-08-18 10:39:42
I did not have any sort of high expectations for this printer at all. I knew it was cheap and did not expect anything crazy. Just wanted an entry level printer as I havent had one since back in the days of manual leveling and needed a hobby to pass some time.This thing has been absolute garbage since day 1. I had printers almost 8 yrs ago that printed more consistently than this can. The bed leveling is for show. It does nothing for you, and anycubic has their software so locked down that you can't even see a mesh profile to see if it's even making one.Hope you like horrible software too as you are stuck using anycubic next or the anycubic phone app. Oh, careful with the phone app. If you send a print remotely, even with bed leveling beforehand, you may just come home to a print bed that has been scraped clean and destroyed by the "auto-leveled" nozzle. Also, don't expect a response from anycubic support about the issue either. So if you do make the mistake of purchasing this right now make sure you get some spare nozzles and build plates, you'll probably need them. Oh also it doesn't say it on this listing but a good amount of these printers come with a defective hotend that anycubic WILL replace, once it overflows and fills your whole extruder with globs of filament ðŸ‘ðŸ¼but not before that. Just to be clear.The gantry is crooked more times than not. You can relevel it, but don't you fret, it will be crooked again in no time. Why? Who knows. Oh and be sure that you keep your eye on the bed as you tram it as light pressure will also tweak the bed just enough to misalign your gantry if you're not careful enough.Does it print fast? Sure. Do some people have decent luck with it? Absolutely. But all in all it's an extremely low grade printer with a whole host of problems that can easily be mitigated by just spending a tiny bit more on literally any other printer than this one. I went in with very low expectations and was still massively let down. I spent more hours doing test prints to try and fix this damn thing than I did actually printing anything. Now I'm outside of the return window and am not cruel enough to pawn this POS off on anyone else. Maybe I'll deconstruct it and make a statue of the parts, or throw it into a ravine.
Elaine Johnson
2025-08-05 15:33:13
Having problems adding a camera to my 3d printer. Bought a camera because you're limited to what you can print. And now I have to print a enclosure for it before I can attach it. Can't find one I can print. Can't ya'll just send me one.
Austin
2025-08-03 18:14:27
Faster than the kobra 2, I love remote printing from my phone.
Bobbie
2025-07-20 12:24:07
Print good, just what he wanted
Melissa
2025-06-29 11:28:34
My son loves it. Perfect for new or well trained builders.
jeff
2025-05-19 15:19:27
Got this printer a couple days ago got it put together the right way turned it on and it wouldn’t auto level I tried getting some tech advise and that didn’t help me at all…. I am VERY frustrated and disappointed in this printer…..I’ve owned the anycubic kobra 2 Neo and the Kobra 2 pro and they worked fine…. I am very disappointed with anycubic
Francesco
2025-03-08 12:30:46
grande prodotto per chi si avvicina per la prima volta al mondo della stampa 3d, partendo dal montaggio molto semplice, subito pronta dopo auto allineamento, stampe veramente quasi perfette.
Vivek Chausasia
2025-03-03 12:29:42
I would suggest to buy if you are just a beginner and an 3d print enthusiast.Quality is top notch. Printer is easy to install will the installation guide that is included in the box.I would highly recommend buying this.Great value provided for the money.10/10Print quality is also very great and details are amazing 😠.
TB
2025-01-05 12:13:11
The Anycubic Kobra 2 Neo 3D Printer is an absolute game-changer for me! This little beast is not only incredibly fast, but also super easy to set up and use. The auto bed leveling feature is a dream, making sure every print comes out perfect without any hassle. Plus, the print quality is top-notch, with smooth layers and impressive detail. Whether you're a beginner or a seasoned pro, this printer will exceed your expectations and bring your 3D printing projects to life with ease and precision. Highly recommended! Bought it here for Only 99 Euro on Sale!!
Graeme S
2024-12-29 12:45:42
The media could not be loaded.
Austin Jordan Vas
2024-12-05 10:07:17
Dosenot have one connector so dosenot move on the x axis
Recommended Products