Your cart is empty.
Your cart is empty.Product Description
Compatible with Infiniti Models:
- 2013-2013 JX35
- 2014-2020 QX60
Compatible with Nissan Models:
- 2013-2018 Altima
- 2016-2023 Maxima
- 2015-2023 Murano
- 2013-2020 Pathfinder
OEM Number:
- CF11776, PC9932-P, C48162, WP10009, 27277-3JC1A
Specifications:
- Location: Behind Glove Box
- Length: 11.09 inch
- Width: 9.61 inch
- Height: 0.78 inch
- Activated Carbon Included: Yes
- Washable: No
- Reusable: No
- Packaging Type: Box
Chris.074
2025-09-03 10:36:43
Definitely didn't want to waste money on a name brand filter from local auto parts stores, as essentially, a cabin filter is a cabin filter. A $40 one won't perform any better than a $15 one, don't let anyone convince you otherwise. That being said, this filter looks great. The quality seems to be top notch. Changing it on an Altima is a real pain, so keep that in mind for the DIY folks. Nonetheless, I'll be buying these guys for every change. Great seller as well!
Tim
2025-08-27 14:40:55
I was very pleased with this product. It was quality and a fair price. With that said, I will never try to replace this filter again myself on my 2015 Infinity QX60. The impossible place they put this filter in the car make me wonder what they where thinking when they made this a replaceable filter. The contortions you have to go through to access it is a joke. I am a do-it-yourselfer, but this is one job I will save for a much younger, more limber person next time.
wonda g
2025-08-17 11:17:06
I have a 2015 Altima, this fits perfectly with no problem. Yes it's a challenge to get out the old one, apart from that it works.
Z
2025-08-06 12:52:45
reasonable price and fits well, will buy again if needed.
InOtterSpace
2025-08-05 19:38:51
Quality and Fit:Immediate difference in quality from the OEM filter. The new filter is less soft than the OEM one. Fit-wise, it’s a bit difficult to install, feeling crammed rather than sliding in smoothly like the engine air filter. However, I was told this is normal.Performance:The cabin air filter effectively catches particles from outside. I change it at the end of every two seasons (Spring and Fall). There's no noticeable change in MPG, so it doesn't impact fuel efficiency.Cost Efficiency:Buying and installing the filter myself saves a lot of money and time compared to having the dealer do it.Installation Tip:When removing the old filter, note the air flow direction indicated by an arrow on the side. Install the new filter with the air flow in the same direction.Pros:Effective particle filtration.Cost-saving by DIY installation.Cons:Slightly tough to fit in but not impossible.Conclusion:The cabin air filter is a cost-effective alternative to the OEM filter, despite being a bit challenging to install. It performs well in filtering particles, making it a worthwhile purchase for DIY maintenance.
Mojo
2025-07-21 11:44:52
Seems to be sturdier and of better quality then the one I replaced, however Nissan didn’t do us any favors with the location and accessibility of the cabin filter. I’m fairly certain the filter is scrunched up in there, and not fully covering the air path, therefore doing little good.
Jason Floyd
2025-07-14 21:13:45
Much cheaper than going to the dealer but because of the location of where it goes in my car, it was an absolute pain in the butt to install. Still, works great and for as much as the dealer would charge, I'd still buy this and install it myself again!
Ol' Reg
2025-06-11 18:23:14
I'll be honest, my previous car had this filter located behind the glove box and mounted horizontally. The new car (A Nissan Pathfinder 2020) one has to get on the floor, release a little latch, take a plastic cover off and work the old filter out. Not that easy and my shoulders are crap so there was a pain factor built in.Putting this one in was far harder. It took several tries to know it was in correctly and to get the cover snapped in place.My previous car I let an oil change place replace this filter and, a few years later, when I decided to replace it again, my self, I found that they had just shoved the filter media into the opening (It was two pieces of filter media) without bothering to move the first off to the side neatly and slide the second into place. As a result, the filter process was not really happening as both pieces came out in S shapes rather than I shapes.That part isn't an issue with this filter in the newer pathfinder but it took a lot of patience and ibuprofen.
Mehmet Can
2025-04-13 09:13:44
Value for money, from shops i was only able to buy regular filter from this amount. Quality looked good to me, not as good as oem part but still does the job, it does fit well even though installation location is kinda hard to reach.
arnel
2025-03-22 18:06:28
Bery fit and hood quality
Danny Cheng
2025-02-22 18:42:42
Fits really well, very fast shipment. excellent
Su
2025-01-11 11:49:43
saved the day, good one
SANDEEP
2024-11-25 21:21:51
Works decent has been using since a year.
Recommended Products