Your cart is empty.
Your cart is empty.Product Description
Designed for Continuous Operation
The impeller of the S8038-7K is held in place by two ball bearings, making it not only particularly durable but also less sensitive to external influences such as heat and dust.
Full Control with a wide Speed Range
The S8038-7K has a wide speed range that can be regulated via PWM and voltage, allowing it to be tuned to the specific system requirement. With a wide speed range from 500 rpm to 7000 rpm, it provides an ideal balance between cooling performance and noise, ensuring optimal performance in various scenarios.
High Airflow and Static Pressure
Heat sinks and radiators benefit from fans with high static pressure. The S8038-7K has a static pressure of 25 mmH₂O, which enables it to push air, even through narrow cooling fins. At the same time, it achieves a maximum airflow of 118.93 m³/h allowing it to quickly dissipate heat from enclosures. These properties make it the ideal choice for a wide range of applications.
Flexible Connection Options
With its standard 4-pin fan connector, the S8038-7K can also be connected to 2-pin or 3-pin sockets, and then be controlled by voltage. The 30 cm cable allows a lot of flexibility in positioning.
Active Cooling for Extended Motor Lifespan
The lifespan of fans is mostly determined by the lifespan of the motor, which is significantly dependent on the motor temperature, especially in long-term operation. The motor of the S8038-7K is actively cooled by an additional impeller in the fan hub. By maintaining lower motor temperatures, its lifespan is extended by up to 50 %. This advance not only leads to improved operating efficiency, but also to significant cost savings in the long run.
Wide Range of Applications
The S8038-7K fits into 2U server cases and serves as an upgrade or replacement for a CPU fan, radiator fan or for system ventilation. In addition to server cooling, it is also used in industrial systems and plays an important role in machine control and automation systems. Reliable and robust, it assures performance in various hardware environments and ensures efficient cooling and minimal downtime.
Technical Specifications
General Specifications
Fan Speed: 500–7000 rpm
Airflow: 70 cfm | 118,93 m³/h
Control Type: PWM
Static Pressure: 25 mmH₂O
Control Type:
Fan Frame: Standard
Connector: 2510 4-Pin Connector
Fan Bearing: Dual Ball Bearing
Operating Ambient Temperature: -10~70 °C
Electrical Characteristics
Cable Length: 300 mm
Starting Voltage: 3,6 V DC
Current | Voltage: 0,5 A | 12,0 V DC
Size & Weight
- Length: 80 mm
- Width: 80 mm
- Height: 38 mm
- Weight: 146 g
Joel Monterrey
2025-08-05 15:57:55
I wanted/needed a 90mm but Arctic only makes 80 and 120. My GPU runs how so I removed the stock fans and replaced them with these. I had plenty of room on the motherboard for the extra height so it all worked out. Temps are drastically cool. I think I shaved 30 degrees. I keep them running fairly low but these can spin up to 7K. Obviously, that would be too loud and it's not needed but it's there if you need that. Downside is that these fans take in more dust but that's an easy fix. Compared to the generic fans, these are much better. I replaced an off brand 80x80x38mm fan with these.
Fabio
2025-07-02 12:05:25
Buona struttura in plastica ben disegnata buon flusso d'aria e discreta rumorosità . Foro per raffreddamento del motore può essere utile in ambienti privi di polvere ma viene fornito nella scatola adesivo per chiuderlo. Comprese le viti di fissaggio. Regolabile in velocità anche con la connessione a 2 fili. Da valutare la durata in ore lavoro.
serebro
2025-05-17 12:03:25
Wie beschrieben, ist aber ein last Lüfter, daher ist entsprechend laut
Martin Kufner
2025-05-13 16:06:46
Läuft auch mit Schutzgitter nicht so laut wie andere Serverlüfter- (Kein heulen, das weit trägt und nervt).Kräftiger Lüfter allerdings etwas harter anlauf mit 1 Ampere kurzzeitig aber kein problem wenn mit PWM Temperaturregler läuft Jedoch mit einem Boost regler vom USB 2,4 Ampere auf 12 Volt problematischMuss mit 9 Volt einstellen und dann hochdrehen.Direkte 5 Volt nimmt er 0,1 Ampere auf und ist stärker als mein anderer USB Fan der mit 0.3Ampere aufnahme läuft.
Joel Monterrey
2025-04-20 21:11:09
I wanted/needed a 90mm but Arctic only makes 80 and 120. My GPU runs how so I removed the stock fans and replaced them with these. I had plenty of room on the motherboard for the extra height so it all worked out. Temps are drastically cool. I think I shaved 30 degrees. I keep them running fairly low but these can spin up to 7K. Obviously, that would be too loud and it's not needed but it's there if you need that. Downside is that these fans take in more dust but that's an easy fix. Compared to the generic fans, these are much better. I replaced an off brand 80x80x38mm fan with these.
Fabio
2025-03-26 17:19:39
Buona struttura in plastica ben disegnata buon flusso d'aria e discreta rumorosità . Foro per raffreddamento del motore può essere utile in ambienti privi di polvere ma viene fornito nella scatola adesivo per chiuderlo. Comprese le viti di fissaggio. Regolabile in velocità anche con la connessione a 2 fili. Da valutare la durata in ore lavoro.
serebro
2025-01-27 15:30:50
Wie beschrieben, ist aber ein last Lüfter, daher ist entsprechend laut
Martin Kufner
2025-01-20 16:11:31
Läuft auch mit Schutzgitter nicht so laut wie andere Serverlüfter- (Kein heulen, das weit trägt und nervt).Kräftiger Lüfter allerdings etwas harter anlauf mit 1 Ampere kurzzeitig aber kein problem wenn mit PWM Temperaturregler läuft Jedoch mit einem Boost regler vom USB 2,4 Ampere auf 12 Volt problematischMuss mit 9 Volt einstellen und dann hochdrehen.Direkte 5 Volt nimmt er 0,1 Ampere auf und ist stärker als mein anderer USB Fan der mit 0.3Ampere aufnahme läuft.
Recommended Products