Your cart is empty.
Your cart is empty.Product Description
Specialty Tools - Brake Service Tools
-
12-Piece Master Cylinder Adapter Kit
Quick and Easy Brake Fluid Changes
This ARES Master Cylinder Adapter Set includes twelve adapters all designed to work exclusively with our ARES 70921, ARES 18051, and ARES 18053 Brake Bleeder Tools, so you can easily remove and refill fluid into your entire brake system on your own. Compatible with 90% of current master cylinder reservoirs, this adapter set will help you get the job done on nearly any brake system, whether you're a professional or a diy-er.
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked. -
4-Piece Yellow Brake Caliper Hanger Set
Securely Restrain Brake Calipers
This ARES 4-Piece Brake Caliper Hanger Set safely holds brake calipers in place during brake, wheel bearing, axle, and suspension work. These hangers prevent damage to hoses and brake lines by securely restraining the brake calipers. With a total length of 8-3/4 inch and a hook gap of 2-5/8 inch, these brake caliper hangers make it easy to maneuver and hook onto objects. The rubber tips also prevent scratches to surfaces, and the high visibility color ensure you can see exactly where they are.
-
4-Liter Manual Brake Fluid Pressure Bleeder Set
Easy One Person Manual Pump Operation
The ARES 4L Brake Pressure Bleeder features a convenient one-person pump design. Easily pressure-fill fluid into your entire brake system, and the built-in pressure gauge lets you closely monitor the pressure system. With an adapter that's compatible with a wide variety of European master cylinder reservoirs, this bleeder is perfect for work with disc or drum brakes, even with master cylinders that are in tight spaces. This set includes a 1L reservoir bottle for used brake fluid during bleeding.
- The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
23-Piece Brake Caliper Wind Back Tool Set
One-Person Brake Caliper Piston Rewinding
The ARES 23pc Brake Caliper Wind Back Tool Set features a pneumatic compressor tool with 22 magnetic drive key disc adapters that allow you to easily rewind brake caliper pistons without an extra set of hands. The ergonomic compressor features a knurled swivel handle that turns both clockwise and counter-clockwise for use with left and right threaded pistons. Thanks to the convenient carrying case and permanently etched adapter labels, you'll always know you have the right size for the job.
-
2-Liter Brake Pressure Bleeder and Extractor Set
Make Brake Fluid Changes Quick, Easy, and Hands Free
The ARES 2L Brake Vacuum Bleeder/Extractor Set attaches to shop air compressors for easy vacuum bleeding from vehicle calipers, avoiding the need for expensive cylinder adapters, while the trigger handle locks in for hands-free operation at a 70-170 psi working pressure. This set also features 40-inch bleed hose with a universal rubber adapter that bleeds the brake system, and an extractor hose to extract a variety of fluids. With a 1-liter reservoir bottle that allows for a hands-free refill.
-
8-Piece Brake Gauge Tool Set
Easy To Read Color Coding For Brake Pad Checks
The ARES 8pc Brake Gauge Tool Set features a color-coded system to identify if any vehicle has sufficient brake lining or if the brake pads or shoes need to be changed. Complete with readings in 8 metric and SAE sizes, these gauge tools are constructed of 20-gauge sheet metal and are held together by a heavy-duty rivet, so you'll always have the complete set in one place. Gauge widths ranges from 2mm (0.0787 in) to 12mm (0.4724 in), this set will help keep your brakes in shape at every stage.
I buy a lot of stuff
2025-09-03 13:32:26
This is the best brake bleeder that I have ever used. It was very simple to set up and bleed the brakes on my boat trailer.
dee
2025-08-28 14:09:18
Asked a few question before purchasing. Got alot of replies telling me yes. Used on my boat trailer with surge brakes. Never worked on brakes before as I wanted to learn encase I had brake issues on the road. This work great only issue for me was the first time using it I did not tighten the bottle to the trigger so it seemed not to work good but still pulled fluid out. Next day tried again with collection bottle tighten and it went much faster.
Louie
2025-08-02 16:07:31
This product is great! I use it everyday with no issues at all. The only thing is that you cannot fill the bottle up to high because then it will start spraying brake fluid mist out of the filter! All in all great product
Darth Valenti
2025-07-24 18:27:57
I bought this because it was cheaper than buying the plug that fits in my power steering reservoir all by its self.The plug works great! I'm slowly finding uses for the rest of the kit.
Mike T.
2025-07-15 16:20:40
This tool makes brake fluid changes a snap. Almost as easy as an oil or transmission fluid change. The suction isn’t super powerful but plenty for the job. It does use a fair amount of air, but my pancake compressor was able to keep up. If you’ve ever used a Mity Vac, etc., this is way less messy. I used to dread brake fluid service due to the puckered fingers from handling hydrophylic brake fluid. This time I didn’t get any fluid on my hands, nor none on the garage floor. Great tool!
OG
2025-05-31 16:06:54
I use this daily, great product
Custommotor
2025-04-13 16:35:45
So I kind of feel like the reviews on this product are actually the combination of reviews on multiple different products.The product I have is the basic shop air bleeder that you hook to the bleeder screw at the caliper. The shop air creates a vacuum and sucks the fluid out of the hose.It does a great job of sucking fluid. It can take the fluid in the reservoir from full to empty at the back right wheel in a few minutes with the valve open. The problem with this product, and I have used it on multiple different vehicles, is that it has never sealed right. I don't know if it sucks the fluid too quickly or never seals to the bleeder screw correctly but it puts air in the system. Every single brake system I have ever done with this has required me to go back and manually bleed to get the pedal from or the brake lever firm on motorcycles.I have tried a different fitting, but it's still somehow gets air in the system. The master cylinder never runs below the low mark so it's not sucking in air from there. I feel like the same might put so much suction onto the bleeder screw that it's sucking in air down the threads. It's a real pain because my old one which was a different brand and never had this issue.
Los
2025-02-13 13:55:43
Bought this bleeder since I didn't want to buy an expensive one off the tool truck. Wanted to give this a shot plus it had a brake fluid container which is amazing. The vacuum bleeder broke after 8 months from the air fitting to the plastic . It did the job but I did not like it as much since you can smell the brake fluid fumes from the vent as it operated. Not healthy. Ending up having to buy one from the tool truck. so it best to say same a little and buy a good one if you are in the shop using it constantly. As for the fluid container it's worth it still using it. In the end you pay what you get for.
Oscar
2025-01-24 15:49:15
No tiren su dinero, es caro y sin exagerar succiona mas un popote en la boca que aplicarle 110 PSI a esta bomba de succión. Mejor compren una jeringa o una bomba manual.
Recommended Products