Your cart is empty.
Your cart is empty.Product Description
- This a replacement part for a standard Reverse Osmosis (RO) System
- All tube connections are 1/4" with "in" and "out" labeled on the top
Automatic Shut-off Valve with Quick Connection. This a replacement part for a standard Reverse Osmosis (RO) System. All tube connections are 1/4" with "in" and "out" labeled on the top. This valve shuts off the feed water going into an RO System when the pressure on the tank side reaches 2/3 that of the feed pressure.
Racerx1966
2025-09-04 17:12:28
This review is for the 1/4" clips. Received these 2 days after ordering. I was installing a float switch and pressure switch on my RO system I use for making water for brewing beer, and needed some extra C-clips.Upon opening the package, I was initially dismayed, as the clips didn't look like they were as "crisply" molded as the OEM clips on my RO system. My fears were soon put to rest, as I found that they were much more consistent and easier to place (and remove) on the fittings. The overall fit is much better than on the OEM clips, so I changed them all out. Would definitely buy again.
James Brattain
2025-08-17 12:55:34
Exactly what I wanted
A. DeJesus
2025-06-27 14:58:03
It works perfectly in Premier RO Pure Plus and it cost 1/3 of the original brand.
Pat
2025-04-01 21:27:04
I am a builder and remodeler. I put RO systems in kitchens and homes I do. I build my own systems with components like this shut off. This has failed in a customers home. It doubled their water bill since install and the pre filter clogs prematurely (how I know it's the culprit as I tested the city water and it ran 105PPM, so it's really good). I am replacing every one of these valves I installed as a caution with a higher rated/quality one
Lizziebear
2025-01-25 10:41:33
Had to replace a faulty out of the box GE valve on an RO system.
hold
2024-12-30 13:50:21
Looked like mine but ports were in different positions. You think there all universal but they are not. Will have to get tubing to make my lines longer so they will be able to reach the new positions to make this work. But if I could find one that lines up like mine I would just buy it instead. Would of been nice to include a instruction on where to tied lines in. The simple in/out on valve didn't do it for me
WALT B
2024-12-11 19:30:15
Each clip fit snugly and definitely maintained a secure connection between the hoses and fittings in my water filtration system.
M. Kasperski
2024-11-29 10:12:46
It's a piece of plastic. If I was so inclined, could cut the same thing out of old credit cards with scissors. It works. I expected it to work. Bravo.Kudos to the seller, product arrived well before estimated!
Recommended Products