Your cart is empty.
Your cart is empty.Product Description
-
Standard Fuel Injector & High Volt Fuel Injector
The CT60 can drive 12V standard injectors of fuel engines and 70-120V high voltage injectors of diesel engines.
-
Adjustable Operating Frequency & Time Range
Operating frequency range: 600-4000 rpm/min. Time range: 0-99 minutes. During the cleaning process, pulse cleaning can be achieved by adjusting the RPM and width to optimize the cleaning effect.
-
Simultaneous Cleaning of Two Injectors
It supports the connection of two injectors for simultaneous operation to compare the spray status and spray angle of each injector.
-
The LCD display provides an intuitive view of the current operating frequency and test time, enabling more precise adjustments.
-
CT60 Fuel Injector Cleaner and Tester adds the GDI injector drive mode can be used with ultrasonic cleaners and older fuel injector testers.
-
Solve Blocking
Solve Vehicle Jamming
Solve Leaks
Solve Incomplete Combustion
Step 1 Connect the leads of the tester to the fuel injector.
Step 2 Connect the fuel injector and cleaner to the fuel injector cleaning adapter.
Step 3 Adjust working time and operating frequency. Then press the start button.
Step 4 Observe the spray state of the injector and the spray angle for any problems.
Austin
2025-09-04 11:06:24
Cleaned 12 injectors so far, tool is working good. No issues, worth the money. Unstuck and cleaned some of my old spare Nissan injectors.
Evan
2025-06-08 17:28:26
The tool itself is remarkably simple to setup & use, the connectors do require a good bit of effort to seat properly on the injector & the same or more effort is needed to get them off.But it’s manageable.The only thing about the kit that’s terrible is the adaptors that come with the kit to push cleaning solution through the injector.The tolerances are too loose on both ends, & you end up showering in the cleaning solution at the seat of the injector, & at the nozzle end.
Phillips_Performance
2025-03-03 14:03:30
First time buy of this manufacturer, so far very pleased, needed one to test and rebuild a set of injectors, worked like it should and flawlessly at that!
KALE
2025-02-14 16:55:34
Awesome little tool. Easy to use and simple yet effective. Perfect if you cleaning g or doing something more complicated like injector balance testing. Would absolutely buy again and other tools from autool.
STEVE
2025-01-22 17:02:26
So far it’s worked great we were able to get some injectors cleaned and working again with this tool
Alex
2024-12-22 14:38:02
The adapters included didn't fit my injectors and they were difficult to hook cleaner to. Worked anyway but annoying. Afterwards, I 3D printed a custom holder for my injectors. The actual control box works perfectly, with a little rigging it gets the job done. Have a 1995 Grand Marquis
Vedas H.
2024-12-13 10:33:44
Overall great product but the cleaner adapters do not fit the aerosol cans.
Ryan
2024-12-04 16:58:20
The media could not be loaded.
Keegan
2024-11-19 15:55:01
Spray is a bit weak then I'd like but could just be operator error. I like having the ability to change rpm for different pulse rates, gives you a good idea of what's happening while it's running.
Recommended Products
$40.80
$ 21 .99 $21.99