Your cart is empty.
Your cart is empty.Product Description
Chevy_guy
2025-09-03 13:43:22
Items thru mail nicely packaged and on time. Although it says in the description that it comes with resistors I didn't read that far into it and was surprised when I seen them because I obviously needed them for install without them I was getting a hyper flash. They also send you quick connect clips to tie them up which is a plus. They look great for what I was looking for gives me more light up front since I got leds for headlights and it gives my truck a modern look with the switchback to amber when signal is going which are a nice bright amber. Definitely recommend
Ana Gonzalez
2025-08-28 13:21:20
The media could not be loaded.
Casey P.
2025-08-03 11:44:01
I missed it but it does come with resistor easy install once you figure out your wiring what is blinker and running light. Love the look and helps the led headlight a a good bit. Blinker are much brighter. I would buy again!!
Customer
2025-07-30 15:57:31
These are Nice and Bright I'm using them as DRL lights even tho it's not recommended I know they have a switchback option but don't think they have a Canbus Chip they have another set of switchbacks that do but are less bright they have a fan instead of LEDs on the tip
Joe s
2025-07-18 21:01:31
Worked and is bright af
Jason
2025-05-26 13:46:11
Very bright almost as bright as my LED headlights. Functions as it should. Had to put a hyper flash relay in my truck because resistors don’t work for 03-07 classic Silverado's to prevent hyper flash. When they switch to the amber turn signal they’re just as bright. If your vehicle comes factory with led turns then you don’t have to worry about that. Housing on bulb is black so if you have clear headlights they are noticeable because of color but if it bothers you enough that’s nothing a little silver hobby model car paint can’t fix just be careful and don’t paint the led diodes. Great lights.
Jacki Grant
2025-04-14 10:24:48
These are great front turn signal lights for my 2013 T&C Limited. Bright Amber turn signal then when not used as a turn signal it works as a secondary driving light when the lights are turned on.
EJ
2025-04-13 21:46:40
Bought these for a 2003 Avalanche (with body cladding) and they work great in the day time, when my head and tail lights are not on constantly. But, I have *AFTERMARKET* Tail Lights with LED built in, and they interfere with these greatly. At night, my turn signals straight up do not work. My blinkers don't blink. The light doesn't turn orange. Nothing. I lose the whole functionality of having turn signals at night. But they work perfect in the day time. I took these out, put regular bulbs in, and hey I got turn signals again! I have read that aftermarket tail lights and turn signals have a hard time playing together, so do your due diligence. I have had other switchback LEDs in this truck, with these fancy tail lights. But they were cheaply built, and the body of one of them broke and was hanging lose inside my headlight housing. Hence, I bought these. The body is built much sturdier than my last pair, but I need my turn signals to work lolAlso yes, they hyper flashed. But who cares. My tail lights caused hyper flash already when I bought them 2 years ago.Also: I tried unplugging my fancy tail lights and putting these back in to see if anything changed, and the results are in conclusive. They worked for a few minutes.... then I lost blinker functionality again. So these are just... weird lol.
tyler r.
2025-03-23 14:59:04
I recently purchased the LED turn signal lights with running light from Amazon, and I have to say I'm thoroughly impressed. These lights are well-made and offer excellent visibility on the road, which is crucial for safe driving.The installation process was straightforward, and the instructions were easy to follow. The lights fit perfectly in place of my old ones, and the wiring was simple to connect. I appreciate that they came with all the necessary hardware, so I didn't have to purchase anything else separately.The turn signal lights are bright and clearly visible, even during daylight hours, which gives me added confidence on the road. The running lights are an excellent addition as well, providing a subtle yet noticeable glow that adds to the overall look of my vehicle.I also appreciate that these lights are energy-efficient and built to last. LED lights typically last longer than traditional incandescent bulbs, so I expect these to be a long-lasting and cost-effective upgrade.Overall, I highly recommend these LED turn signal lights with running light to anyone looking for a safe, stylish, and durable lighting solution for their vehicle. They're a great value for the price and offer excellent performance.
Geoff Fletcher
2025-03-06 14:03:39
Easy install. Load resistors are included in box and are needed to prevent hyper flash. The amber looks great, as does the bright white parking light.For those wanting to run amber as running lights, know that wranglers light up the blinker not the parking light so your resistors will be energized whenever you are driving. Which mean they get really hot and should be mounted somewhere that won’t melt.Good quality light. Shall see if it stands the test of time.
Lyndon Sanche
2025-02-23 12:02:47
Put these on the front signals in my 2011 Taurus. I had to splice in resistors to stop hyperflash.Much brighter than the stock halogen, and much brighter than the LEDs I bought at Canadian Tire. The switchback functionality is excellent.I have been using them in Canada between -40C and +35C and they have working two years and counting.
Phil Moruzi
2025-02-21 12:22:23
Had these bulbs for 5 months now, they are still going strong. The white is bright and adds a nice clean modern look to my car and they switch to amber when you signal/Hazard and they are very nice and bright.One thing to note is that the resistors to stop hyperflash are not attached to the lightbulb itself, but rather you have to splice it into the turn signal cable. This could lead to the wire getting exposed and becoming damaged so I have just been running them with hyperflash because I dont want to cut the wire.
Mitchell Watt
2024-12-17 17:48:46
Bought 4 of them to replace the front signal light bulbs on my 2011 GMC 2500 .First issue was that the resistors that come with them are not big enough to stop the hyper flash.Second issue : After about 1 month , on 2 of the bulbs, the orange switchback part of the bulbs stopped working.Don't buy these
Recommended Products