Your cart is empty.
Your cart is empty.Product Description
The Green Dasher
2025-08-01 17:16:05
I don't usually have trouble assembling things but this one took a little bit of effort because the bin itself is made of very thick heavy plastic pieces that must be locked into place together and it does take a little work to get them all to snap fully into place. But once assembled, it's a great bin for storage of magazines you want to keep. There is one divider included with the bin that allows you to partition the storage space into two halves, and there are slots for 3 additional dividers (which must be purchased separately) that would provide you with five sections. The dividers are sturdy and allow storage of a smaller number of items without them folding or falling over. The bin is not airtight nor watertight, but the covers on the top do a good job of keeping dust out. The bins stack on top of each other with little locking legs that keep them a bit more stable. The handles make it easy to move the bins around. Someone thought about this design and it shows. You pay a higher price for it, but it's a nice solution.
Jaz
2025-07-17 17:44:30
I buy these over and over again, as needed. and I find them probably the best out there for magazine storage, at least on this site. As everyone mentioned, the assembly isn't that easy all the time. I've purchased 6 of these and just came back for more, because they do the job that I need and cardboard boxes are only good for short term. The huge drawback to these is that they aren't even close to watertight, so if you're going to place them in some storage locker that has a chance of storm damage, you might lose your precious antique magazines or precious vintage comic books. The ribbed black cases also attract dirt like crazy on the outside and are tough to clean, I use a pressure washer! You might want to consider placing the containers inside a huge crate to ensure they're free of water damage. I've had storage units for 25 years and there have been several episodes where some leak caused problems in my unit, risking my magazines.You'll love how they stack together and lock together. Not easy to tip over, etc. Out of all that I bought, I've had one that just didn't lock that securely where it's assembled, so I'm careful not to be rough with the case. I guess it's just slightly defective at a locking point. When I rock it, it you can tell it's just a little loose. If I could design my ideal case, I'd probably make it two piece, so that it's watertight on at least on the bottom and sides and just have a lid that seals. Then I'd have the strength and water integrity, but I haven't found anyone selling the proper size for 8.5x11 magazines, that I need, with those characteristics. If you're just going to keep these inside your house or in your closet, then you should be fine. I suppose you could seal up all the sides with silicon, but that'd be a bit of work and there's a lot if seams and a lot of expensive sealer. Don't laugh, I'm storing some 60-100 year old magazines that could become worthless in a heartbeat. and be nearly impossible to replace.I just like how these crates are the perfect size and look professional, compared to some Rubbermaid style tubs. Another idea is to use the 10-pack of cardboard boxes from the same manufacturer and place those in some watertight tubs. It all depends how you plan to store these things and how much moving around you'll need to do, over the years. I hope this helps someone to consider what could happen and help them make the right storage choice.
Tim Tagman
2025-07-05 14:05:46
I'm on the road sales and have magazine sized brochures etc. This keeps them from getting beat up, etc. Perfect storage or transportation solution.
J. Klein
2025-06-03 16:25:50
As many have mentioned, putting this together was a pain. No tools needed but the directions are vague and snapping pieces together was tough. Once put together, it's great and I was able to fill all my Fangoria and MAD magazines without any issue (get it?). I have them in plastic with magazine backing and they fit wonderful. I may buy more in the future. Should protect against seepage too if in a basement.
Kurt
2025-05-02 12:40:58
Bought for some old VW car magazines. They fit really good in these sturdy boxes and will be well protected. I liked them so much that I ended up with a more than a few. A little difficult at first to put together, but you eventually will get the hang of it.
Nad
2025-04-28 18:05:57
I ordered one and was so pleased that I had to order another. Perfect way to store magazines and comics. Can be somewhat of a pain to put together but worth it in the end.
Justin
2025-04-04 15:55:27
I can fit about 50+ standard size magazines in each box. This includes a protective covering with each magazine. Very sturdy…
Carmen mastrando
2025-03-20 12:35:40
The product was great for any magazine or Book that I had.
Salami Reviews
2025-03-17 20:49:37
ChatGPTI can’t recommend these bins enough—I even ended up buying another one from a local store after my first purchase. The bin comes disassembled, but don’t worry—assembly is quick and easy. It also includes one partition, though I wish additional partitions were more affordable in my area.These bins are fantastic for keeping your collection safe and can store quite a few magazines, depending on their size. If I ever need more, I’d gladly spend the money again. They pair perfectly with BCW’s magazine boards and bags, making them a great option for any collector. Highly recommend!
Kunde
2025-03-13 14:51:09
eine gute Qualität für meine Archivierung meiner Sammlung.
Mauricio Leonardo Urbina Delgadillo
2025-02-28 17:39:02
Ya habÃa comprado una caja para almacenar comic de menor tamaño, y esta vez necesitaba guardar mis revistas de vÃdeojuegos. El material es realmente de buena calidad, duro y resistente, la caja es fácil de armar solo que necesita un poco de fuerza para hacer enbonar las piezas. Su resistencia es muy buena para el peso de las revistas.
gutt3d
2025-01-11 10:43:26
I bought one of these to securely store some comics I'd collected from my childhood - the comics require magazine-size bags and boards so naturally I went with the magazine-size storage/display box: the size is spot on. Once assembled, the box is nice and secure and I'm confident it'll provide the protection I want for my comics. Had I more comics, then I'd have no worries about buying another and stacking it onto this one. As it is, it safely stores my comics in the proper way (that is: upright, rather than stacked on top of each other) with the divider working out nicely (with a sectioned-of part available to store spare boards and bags).I must admit I struggled a little with the assembly - which is perhaps ironic, given that this is currently storing all my Zoids comics - but I got there in the end. The instructions provided didn't seem (to me) to be the best way to actually assemble it: I think it would probably be better to install the last small panel before the 2nd large panel is fully clicked home. But whatever - I got there in the end, and all's well. (I see that there's an instructional video which may have shown me a knack/technique that would have made it easier).Excellent bit of kit, and exactly what I need. Perhaps a little pricey, but to me it genuinely feels worth that little bit extra. I would happily buy another should the need arise.
K-Chris
2024-12-24 13:34:18
As advertised
Recommended Products