Your cart is empty.
Your cart is empty.Product Description
Marty the 1 Man Party
2025-08-22 17:45:09
The lights fit perfect in my street legal Can-am UTV. The bulbs were easy to install. I did put on a thin coat of dielectric grease on the blue seal so it would go in easily. I included a picture of the light on. The one in the picture is the new LED low beam and the dimmer yellow one is the actually the original halogen high beam. There is a huge difference between the OEM bulb and the new LED Beamtech. I installed these for the low beams and high beams. I tested them out driving at night and had my son in law driving towards me. He said the lights were not annoying or blinding and looked good at night. The visibility at night is a huge difference between the stock lights. I plan on putting a set on my truck.
Jason mershon
2025-07-14 12:03:35
Super easy install into both headlight and high beam position on my KLR 650. At least as bright as the stock bulbs with much longer life and they pull 20W each, not 55. I now have adequate juice for some accessories.Bulbs are a PITA to change on this bike, so a long lifetime is important to me. I also like the fanless design. I just can’t see a fan surviving any amount of trail riding on this jackhammer of a motorcycle.So far I have about a month of riding with a tiny bit of off-road on them and they seem to do just fine.I would recommend these as stock replacements for sure.
Charles S. Jeffery
2025-04-28 11:01:42
great product so far, bright white light.
Alijah Babbs
2025-04-23 14:58:26
10/10 changed my headlights to these and they worked perfect on my Hyundai Sonata! I finally can see further in this car.
Miguel A.
2025-04-02 13:01:13
The product is great but it has positive and negative terminal signs on the back of the bulb. They might be incorrect. I’m not discouraging you from purchasing but if it doesn’t enter smoothly then flip the plugs. A little flicker at the beginning before you turn on but not sure if it’ll continue. I will update review as time goes on along with these.
chrisquinn13
2025-03-28 11:02:03
These fit the h11 connector but were too long to put the enclosure back on the headlamp assembly of my 2016 Colorado.
RR
2025-03-05 09:09:45
My 2019 Ford F350 had terrible halogen bulbs from the factory. I debated on replacing the whole assemblies with LED housings for almost 2 grand or replacing just the bulbs with LEDs. I researched for months and found a consensus that the Beamtechs were the best choice for value and ease of installation. If you go with the full assembly, you will have to have the computer re-flashed at a Ford dealer in order for them to be recognized by the truck's computer system. The Beamtechs require no reprogramming. The installation was only as difficult as Ford makes it in replacing a standard bulb. There are several good videos on how to replace them BTW. The bulbs fit tight and the beam required no adjustments. I have had no FM interference as some report after installation. Make sure and remove the OEM rubber o-ring before installing the new Beamtech LEDs and make sure the LEDs align straight up and down like the instructions state. I highly recommend Beamtechs, especially if you are driving a Ford Super Duty.
Brian
2024-12-28 16:43:44
Many led bulbs flicker. These don't. They are bright and seem to be well made. I believe they are priced fairly.
Customer
2024-11-26 14:03:10
a big difference from the original one from my dodge
Recommended Products
$23.99
$ 10 .99 $10.99