Your cart is empty.
Your cart is empty.Product Description
AFTER-SALES SERVICE
The company attaches great importance to the shopping experience of each customer. If there is a problem with the received product, please tell us in time, we will solve the problem for you as soon as possible, thank you!
Why Choose Us?
- Simple DIY Installation
- Meets OEM standards
- Ensure long-lasting Life
- Ensure effective performance
5220FR2075L 5221ER1003A Cold Water Inlet Valve by Beaquicy
Perfect Fit, High Quality, Easy To Install
Washer water inlet valve 5220fr2075l 5221ER1003A can control the flow of water into the washing machine. This inlet valve has a standard hose fitting inlet and 2 water outlets facing 45 degrees to the left.
Package Includes:
1 x 5221ER1003A Cold Water Inlet Valve
Specifications:
- Width: 3.24 inch
- Length: 4.41 inch
- Height: 2.82 inch
- Rated voltage:110-120v, 50/60HZ
UNIQUE VALVE
5221ER1003A l-g cold water inlet is used for cold water fill, pre-wash, and the bleach dispenser. To test your valve, unplug the washer when the symptom occurs. Unique valve ports include bleach, dispenser, prewash, and one standard hose fitting inlet.
FIX SYMPTOMS
- Making noise;
- Leaking water;
- Will not stop filling with water;
- Will not fill with water.
PREMIUM QUALITY
5221ER1003A Cold Water Inlet Valve is made from high quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance.
Shari West
2025-09-07 10:33:01
My original part was leaking after 10 years of owning the washer. This was a great replacement. Installation was simple and is working great. Kenmore wanted $80.0 for the same part. Shipping was fast and i was washing clothes 2 days after finding the leak.
Jeffrey A Davis
2025-08-21 13:22:18
Had water puddling on floor in front of washer. Pulled off the top panel of the washer to access and discovered water leaking up from one of the solenoid housings. Ordered this part and it arrived as advertised in perfect condition. While the appearance was a bit different due to materials used, all seems ot be of equal quality as the replaced OEM part. The part fit exactly as needed with no need to modify anything. Be sure to ID the hose locations before removal. Will take any guess work off the table when installing. Part has been in service now for a few months and working fine. Would highly recommend
Customer
2025-05-26 14:39:38
Short Version:Incorrect Hose Threads (but you can force the hose on, cutting new threads)Missing restrictor valve in Port #1. Too much pressure makes the hoses blow off the ports and spray water everywhere.Long Version:My washing machine started leaking after about 7 years of use. I opened it up and found this water inlet valve leaking through one of the solenoids. I went on Amazon and found this Beaquicy valve with decent reviews. It was available in one day for $15 so I gave it a try. First issue was that the supply hose threads were finer than the original part. It did thread on and seal, but really only because the metal hose fitting just cut new threads into the plastic valve. I ran a test load and with the lid open and watched it work. Work it did.... but as soon as Port #1 started flowing water, I noticed the hose would inflate and immediately start spraying water across my laundry room! I tried replacing the hose clamp with a worm type and it still sprayed water past the clamp. Next I tried closing the water supply valve down halfway and all was OK. Next I ordered the LG valve for just under $40 and 2 day delivery. This one had the correct hose threads, restrictor valve in Port #1 and works perfectly with no leaks and supply water opened fully. Should have just bought the factory LG part to begin with.
K.Benge
2025-05-25 21:56:19
I have an LG washer dryer combo, sold as a pair under the model "LG wd85k64100w/nz" but individually, the washer is an LG "WM3570HWA". I bought this washer in 2015, so it's barely 6 years old. I don't think I would ever recommend buying an LG washing machine, given the fact that mine already started leaking from the inlet valve solenoid.Thankfully, this product was easy to replace. I just removed the top of my washer, and could immediately see where the leak was. I bought this piece, and swamped it out. The most difficult part was getting the hoses reattached so that they would not leak. You have to attach three hoses total. Two of my hoses attached without problem, but the third one has a slight leak, and no matter how I tried it didn't quite seal perfectly on this new solenoid valve (due to the deformed end from the previous attachment). I ended up trimming off 1/4 inch of the hose, which solved the issue, and let it form a new seal. This allowed me to reuse the existing hoses and clamps. I'm hoping this lasts longer than the 6 years the original solenoid lasted. So far it's been about 3 months with no issues.
Joe
2025-04-16 17:47:21
Fit perfectly no problems exactly what I ordered.
T. Dempsey
2025-01-17 17:09:55
this is a direct bolt in factory replacement cold water valve. the part numbers that it'll replace are listed in the item description.
Ron
2024-12-14 18:16:59
It was a little taller but it worked
alvinc
2024-12-12 15:39:55
The inlet valve was easy to install and worked great I was a bit hesitant because it was much less expensive than the alternatives but it has worked great
A day
2024-11-14 14:55:29
The shipping took a while but when it arrived was exactly what my husband needed to fix our LG front load washer.
Recommended Products
$33.24
$ 14 .99 $14.99
$39.99
$ 19 .99 $19.99