Your cart is empty.
Your cart is empty.The Beck/Arnley automatic transmission filter kit matches OE form, fit and function. It includes o-rings and/or gaskets that are required for a complete filter installation. Be sure to replace at the regular service intervals and use the specific ATF formulated for this transmission. This kits are application specific for this vehicle.
Anonymous
2025-07-27 11:42:38
2020 Nissan Altima 2.5 SR, fit great looks bigger than original but I’m holding it off the dirty towel. Size is perfect, fits perfect, the install is a pain where the top bolt is so be prepared to spend a little time on it but the filter and gasket are a great choice. Used Nissans cvt fluid . I had no dipstick or overflow tube so I measured what came out during the drain and poured in a thimble more which was 4qts.
lawks
2025-07-16 15:33:37
Works great in my 2019 Nissan Rogue.
Robert 60
2025-06-11 13:49:03
Got this filter for Nissan Pathfinder 2013And it’s a perfect match. Great value for your money, yes I do recommend this product 💯Percent.
Edwin
2025-05-07 15:02:57
Buena opción por precio lo volverÃa a comprar
afgoat
2025-05-05 13:09:51
Just installed this on my Altima. Seems to be a very high quality filter. Came with gasket for filter housing. Just wish it came with crush washer for drain plug too.
James M. Barnett
2025-04-13 15:17:05
Purchased this for CVT oil and filter change on my 2020 Nissan Rogue. I've read other comments about filters not being exactly like Nissan part, such as the after market filter not having as many pleats. Rest assured this filter looks exactly like the OEM Nissan filter, same number of pleats, and includes gasket for filter and filter cover. Highly recommend getting this part if you need it.
James
2025-03-07 15:48:12
Fit perfectly on my 2017 nissan pathfinder.Excellent quality
David Mays
2025-02-28 11:21:20
Worked great. Got the filter and a o-ring to boot.
Barb Nixon
2025-02-06 15:38:06
Very pleased with the quality of this filter. Figment was perfect.
sohappy
2024-12-14 11:42:34
Filter is an exact match for the oem and is a good price . chances are you will also be dropping the transmission pan for inspection and to clean or replace the mesh screen suction filter and to inspect ,clean the 3 magnets in the bottom of the pan , Tips : for the filter ,remember to check housing orientation when removing and that the old rubber isn't still stuck in the housing when you remove the filter, small pick to remove . for the top bolt , use a flexible socket extension and a magnetic socket to hold the bolt on an angle to get it in the housing. (fastest way I found) . For the pan , take a picture of where the magnets go , remove clean and clean the pan with brake cleaner . For most nissan CVT's there is no dipstick , but there should be an over flow plug bolt you can remove to ensure right level . On that you will want to make sure the vehicle is level
Mark
2024-12-11 19:10:06
Came on time and fit well
Muhammad Hadi
2024-11-24 21:34:42
It is not exactly the same size as Original. But managed to install & it should do the job.
Recommended Products
