Your cart is empty.
Your cart is empty.Product Description
performance parameter
- Flow Rate:80-145ml/Min (1.3-2.3GPM)
- Hole size:0.012"(0.3 mm)
- Operation Pressure:4-70kg/cm2 (60-995 psi)
- Thread:10/24 UNC
Simple maintenance
Soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Beduan Brass Misting Nozzles Low Pressure Atomizing Misting Sprayer
Made of pure brass
- The misting nozzle is made of a sturdy brass with stainless steel orifice.
- Does not need to use air compressed.
- It can fully spray with the pressure of tap water.
- The misting nozzle can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect, no leakage.
- It is used a sturdy brass body with stainless steel orifice, widely used in dust removal, landscaping, cool down, artificial fog, garden, patio, greenhouses, spraying disinfectant, landscaping, lawn misting systems and other humidification place.
Application scenarios
Attention
1.This misting nozzle does not have a filtering device. Please make sure that there is no debris in the water when you use it. It will be better if filtering device can be installed at the water inlet pipe. This can avoid clogging.
2.Manual measurement, please allow slight deviation on size.
ez
2025-08-16 10:59:06
Previous owner of my sons house had a misting system in place, but some of the misters were not spraying properly. Took a chance on these since there are no dimensions for thread sizes. They worked out great. Easy to install and mist is spraying properly.
pacapo
2025-07-27 13:44:35
In the Southwestern USA, our heat is legendary. We have had weeks of triple digit temperatures and our pets really appreciate these misters.This is an extremely inexpensive way to provide cooling mist for the pets which must stay outside in these temperatures.Take the time to build a 3-5 mister system and you won't regret it.Ours has been running 24/7 with no appreciable increase in our water bill.At the end of the season, remove these from the PVC fittings and you will be ready to go for next year.Point them 45 degrees below horizontal and they won't clog.Get to mistin!
Adrian in Phoenix
2025-07-22 16:41:23
These screw in easily where I just took out old nozzles clogged by our hard water. I've tried cleaning old nozzles with white vinegar in the past, and it isn't very effective. These replacements are a good price and a much quicker fix.
Jimmy
2025-05-24 10:37:09
Work great.
jon
2025-05-08 18:46:11
These mister nozzles are exactly what I need. They are much better than the ones I was using previously, as they were very low rated GPH. These get the job done and I'll probably buy more.
Bobbi Hartman
2025-02-01 12:53:34
We installed a mister on our pergola several years ago but the nozzles were clogged. These were an easy replacement. The only ones were easy to take out and these were easy to replace the old ones with. We also have several left over for if/when they need to be replaced again. Overall, a good product as it extends the life of outdoor misters.
Gayleen zetich
2025-01-21 15:18:44
I like them for they work great
Customer
2025-01-12 16:06:37
Not all of them work.
Recommended Products